161499

Pioneer cdj-200 Manual

27
Zoom out
Zoom in
Previous page
1/92
Next page
OPERATIONS / UTILISATION
27
<DRB1376>
En/Fr
English
Français
7 To start loop playback with automatically set
loop-out point (Auto BEAT LOOP)
Press the BEAT LOOP/LOOP CUTTER button during playback
or pause mode.
The point at which the button is pressed will be set as the loop-
in point, and a loop-out point will automatically be set based on
the track’s BPM; loop playback will then start.
If the numerical BPM value is not displayed, loop play will be-
gin based on BPM=130.
7 To cut the loop length in half (LOOP CUTTER)
Press BEAT LOOP/LOOP CUTTER button during loop play-
back.
The loop length will be cut down to one-half each time the but-
ton is pressed (Smallest loop length is one frame).
7 Returning to loop-in point during loop playback
to start over the loop playback (HOT LOOP)
Press IN/REALTIME CUE/HOT LOOP button during loop play-
back.
Returns to loop-in point and restarts loop playback.
7 To exit loop playback
Press RELOOP/EXIT button during loop playback.
The track will continue playback in sequence from the loop out
point without returning to the loop-in point.
7 Changing the loop-out point
1. Press the OUT/OUT ADJUST button during loop playback.
The time of the out point is shown in the display, the OUT/OUT
ADJUST button starts to flash rapidly and the IN/REALTIME
CUE/HOT LOOP button indicator turns off.
2. Press one of the SEARCH buttons (1, ¡) or turn the jog
dial.
The loop-out point is moved forwards or backwards in 1-frame
units.
The loop-out point cannot be moved before the loop-in point.
During playback of MP3s, loop adjustment is only possible
within one and the same track set having a cue point.
Pressing the OUT/OUT ADJUST button or waiting 30 seconds
or longer will cause the player to exit from the loop-out adjust
mode and to resume loop playback.
7 Returning to loop playback (RELOOP)
After loop playback has been stopped, press the RELOOP/
EXIT button during playback.
The player will return to the currently defined loop start point
and begin loop playback again from that point. The length of
the loop will be the same as the one first set, even if the loop
cutter was subsequently used.
During playback of MP3s, re-looping is possible only within the
same folder.
7 Pour lancer la lecture à boucle par un point final
de boucle posé automatiquement (Auto BEAT
LOOP)
Appuyez sur le bouton BEAT LOOP/LOOP CUTTER pendant
la lecture ou en mode Pause.
Le point auquel le bouton a été actionné sera posé comme
point initial de boucle et un point final de boucle sera
automatiquement posé selon le BPM de la plage. Ensuite, la
lecture à boucle commence.
Si la valeur BPM numérique n’est pas affichée, la lecture en
boucle commencera en se basant sur BPM=130.
7 Pour réduire de moitié la longueur d’une boucle
(LOOP CUTTER)
Appuyez sur le bouton BEAT LOOP/LOOP CUTTER pendant
la lecture à boucle.
La longueur de la boucle sera réduite de moitié à chaque
pression sur le bouton. (La longueur minimale d’une boucle
est d’un cadre.)
7 Retour au point initial de boucle pendant la
lecture à boucle pour recommencer celle-ci (HOT
LOOP)
Appuyez sur le bouton IN/REAL TIME CUE/HOT LOOP pen-
dant la lecture à boucle.
L’appareil revient au point initial de boucle et la lecture à bou-
cle recommence.
7 Pour quitter la lecture à boucle
Appuyez sur le bouton RELOOP/EXIT pendant la lecture à
boucle.
La plage continuera normalement la lecture à partir du point
final de boucle, sans revenir au point initial de boucle.
7 Changement du point final de boucle
1. Appuyez sur le bouton OUT/OUT ADJUST pendant la lec-
ture à boucle.
Le temps du point final est indiqué sur l’affichage, le bouton
OUT/OUT ADJUST commence à clignoter rapidement et le
voyant du bouton IN/REALTIME CUE/HOT LOOP s’éteint.
2. Appuyez sur un des boutons SEARCH (1, ¡) ou
tournez la bague Jog.
Le point final de boucle est déplacé vers l’avant ou l’arrière par
unités de 1 cadre.
Le point final d’une boucle ne peut pas être déplacé devant le
point initial de celle-ci.
Pendant la lecture de MP3, le réglage de boucle est possible
uniquement à l’intérieur d’une seule et même plage, où est
posé un point de repérage.
Si vous appuyez sur le bouton OUT/OUT ADJUST ou si vous
attendez 30 secondes ou plus, le lecteur quittera le mode de
réglage du point final et il reprendra la lecture en boucle.
7 Retour à la lecture à boucle (RELOOP)
Après que la lecture à boucle a été arrêtée, appuyez sur le
bouton RELOOP/EXIT pendant la lecture.
Le lecteur reviendra au point initial de boucle actuellement
posé et il recommencera la lecture à boucle à partir de ce point.
La lecture de la boucle sera la même que celle définie d’abord,
même si le coupe-boucle a été utilisé ultérieurement.
Pendant la lecture de MP3, un “re-bouclage” est possible
uniquement à l’intérieur d’un même dossier.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer cdj-200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer cdj-200 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info