161499
10
Zoom out
Zoom in
Previous page
1/92
Next page
BEFORE OPERATING (CONNECTIONS) / AVANT LA MISE EN SERVICE (CONNEXIONS)
10
<DRB1376>
En/Fr
CONNECTIONS
Before making or changing connections, switch off the
power and disconnect the power cord from the AC outlet.
1. Connecting to a DJ mixer (DJM-600,
DJM-500, DJM-300, DJM-3000, DJM-909,
DJM-707 (sound output and CONTROL
connector))
Using the supplied audio cables, connect the white plug into
the L (left) terminal and the red plug to the R (right) terminal.
Connect the supplied control cable to enable control of the
unit from the mixer for fader start play and back cue.
÷ When connecting to DJM-300 and DJM-500, connect as
shown in the accompanying illustration.
÷ When connecting to DJM-909 and DJM-707, connect CH-1
CD with A PLAYER, CH-2 CD with B PLAYER using the sup-
plied audio cables.
÷ When connecting to DJM-3000, connect A PLAYER to LINE
1 of CH-1, and B PLAYER to LINE 3 of CH-2.
÷ When connecting to a audio mixer other than the ones
listed above, connect the units AUDIO OUT terminal to the
mixers line in terminal, or the AUX terminal (* do not con-
nect to the PHONO terminal, since distortion or improper
operation may occur).
2. Connecting control cable for relay play
Alternating playback can be automatically performed when
the CONTROL connectors of the two units are connected with
the supplied control cable. (P.28)
CONNEXIONS
Avant deffectuer les connexions ou de les modifier, mettez
lappareil hors tension et débranchez le cordon dalimen-
tation au niveau de la prise du secteur.
1. Branchement à une table de mixage DJ
(DJM-600, DJM-500, DJM-300, DJM-
3000, DJM-909, DJM-707 (connecteur de
sortie sonore et CONTROL))
Au moyen des câbles audio fournis, branchez la fiche blanche
sur la borne L (gauche) et la fiche rouge sur la borne R (droite).
Branchez le câble de commande fourni, afin de permettre le
contrôle de lappareil à partir de la table de mixage, ce qui
autorise le démarrage en fondu et le retour au point de repérage.
÷ Lors dun branchement au DJM-300 et DJM-500, raccordez
comme indiqué sur lillustration accompagnant lappareil.
÷ Lors dun branchement du DJM-909 et DJM-707, raccordez
CH-1 CD sur A PLAYER et CH-2 CD sur B PLAYER au moyen
des câbles audio fournis.
÷ Lors dun branchement au DJM-3000, raccordez A PLAYER
sur LINE 1 de CH-1 et raccordez B PLAYER sur LINE 3 de
CH-2.
÷ Lors dun branchement à une table de mixage audio autre
que celles indiquées ci-dessus, raccordez la borne AUDIO
OUT de lappareil sur la borne dentrée de ligne de la table
de mixage, ou sur la borne AUX (* Neffectuez pas la
connexion sur la borne PHONO, car des distorsions ou un
fonctionnement inadéquat pourrait en résulter).
2. Branchement du câble de commande en
vue dune lecture à relais
Une lecture à relais peut saccomplir automatiquement si les
connecteurs de commande (CONTROL) des deux unités sont
raccordés au moyen du câble de commande fourni. (p.28)
When connecting to a DJ mixer (DJM-600)
Supplied audio
cable
Câble audio
fourni
Supplied
audio cable
Supplied
control cable
Câble de
commande fourni
Supplied control cable
Câble de commande fourni
CDJ-200 CDJ-200
Lors du branchement à une table de mixage DJ (DJM-600)
Câble audio
fourni
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer cdj-200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer cdj-200 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info