161513

Pioneer cdj-1000mk3 Manual

20
Zoom out
Zoom in
Previous page
1/124
Next page
Loading and Removing Discs/
Insertion et retrait des disques
20
En/Fr <DRB1396>
Loading and Removing Discs
Hold evenly when inserting
Insert with label
surface upwards
1. Set the rear panel POWER switch to ON.
Do not attempt to force a disc into the slot when the POWER
switch is turned OFF, since the disc or loading mechanism may
be damaged.
2. Insert the disc into the loading slot.
Hold the disc with label surface upwards and insert evenly into
the front-panel disc loading slot.
When using 8 cm discs, place the disc into an adapter first.
This unit spins at high speed to provide high performance.
When playing 8 cm discs with an adaptor, for safety rea-
sons the rotation speed is reduced as a result scratch and
reverse speeds will be lower.
Only one disc can be loaded at a time. Do not attempt to load two
or more discs simultaneously, or to load a second disc when an-
other disc is already loaded.
When loading a disc, do not apply bending force on the disc, or
attempt to force the disc into the mechanism. Also, when the load-
ing mechanism begins to pull the disc into the player or to eject a
disc, do not attempt to forcibly override the mechanism’s move-
ment, since the disc or loading mechanism may be damaged.
3. When the EJECT UNLOCK/LOCK switch is set to [UNLOCK],
press the EJECT (0) button to eject a loaded disc.
If the EJECT UNLOCK/LOCK switch is set to [LOCK] , dur-
ing playback press the PLAY/PAUSE (6) button to first
stop the disc, then press the EJECT (0) button. If a cue
point has been set, during playback press the CUE button
to initiate back cue, then press the EJECT (0) button to
eject the disc.
When the button is pressed, disc rotation will stop and the disc
will be ejected partway from the loading slot.
Note:
Do not attempt to press the disc back into the slot while the [EJECT]
indicator is lighted. If the disc is pressed back in while the [EJECT]
indicator is lighted, the loading mechanism may stop. In this case,
press the EJECT (0) button again, and do not attempt to reload the
disc until the [EJECT] indicator has turned OFF.
Insertion et retrait des disques
Insérez à l’horizontale
Surface
étiquetée vers
le haut
1. Allumez (ON) l’interrupteur POWER du panneau arrière.
Sous peine de les endommager, n’essayez pas d’insérer de force
un disque dans la fente si l’interrupteur POWER est coupé (OFF).
2. Insérez le disque dans la fente de chargement.
Dirigez la surface étiquetée du disque vers le haut et insérez-le à
l’horizontale dans la fente de chargement du panneau avant.
Pour la lecture d’un disque compact de 8 cm, placez d’abord le
disque dans un adaptateur.
L’appareil tourne à grande vitesse pour assurer de hautes
performances. Pour des raisons de sécurité, à la lecture de
disques de 8 cm avec un adaptateur, la vitesse de rotation
est réduite par suite du scratch et les vitesses inverses
seront plus lentes.
Un seul disque peut être introduit. N’essayez pas d’insérer
simultanément plusieurs disques ou d’en charger un second si un
est déjà installé dans le lecteur.
Au chargement d’un disque, ne le pliez pas et ne forcez pas son
insertion dans le mécanisme. De plus, lorsque le mécanisme de
chargement commence à attirer le disque à l’intérieur ou de
l’éjecter, n’essayez pas de contrecarrer son mouvement, car le
disque et le mécanisme pourraient en être endommagés.
3. Lorsque le sélecteur EJECT UNLOCK/LOCK est réglé sur
[UNLOCK], appuyez sur le bouton EJECT (0) pour éjecter
le disque installé.
Si le sélecteur EJECT UNLOCK/LOCK est réglé sur [LOCK],
pendant la lecture, appuyez sur la touche PLAY/PAUSE (6)
pour arrêter d’abord le disque, puis appuyez sur le bouton
EJECT (0). Si un point de repère a été posé, pendant la
lecture, appuyez sur la touche CUE pour initier le retour au
point de repère, puis appuyez sur le bouton EJECT (0) pour
éjecter le disque.
Lorsque le bouton EJECT (0) est actionnée, la rotation du disque
s’arrête et le disque ressort partiellement de la fente de chargement.
Remarque :
N’essayez pas de repousser le disque à l’intérieur, alors que le voyant
[EJECT] est allumé. Si le disque est repoussé tandis que le voyant
[EJECT] est allumé, le mécanisme de chargement peut s’arrêter.
Dans ce cas, appuyez à nouveau sur le bouton EJECT (0) et
n’essayez pas de recharger le disque tant que le voyant [EJECT] ne
s’est pas éteint.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer cdj-1000mk3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer cdj-1000mk3 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info