699670
21
Zoom out
Zoom in
Previous page
1/64
Next page
21
En
03
Switching the output
video resolution
Use the procedure below to switch the output video
resolution from the various video output terminals.
1 Press HDMI.
The current output video resolution setting is
displayed on the player’s front panel display.
To switch the output video resolution, press HDMI
again.
The output video resolution setting can also be
switched by selecting Resolution from the Initial
Setup menu (page 38).
Caution
On some devices (TV, AV receiver or amplifier, etc.),
the video or audio may not be output properly when
the resolution is switched. If this happens, use HDMI
to set a resolution at which the video and audio are
properly output.
When video signals are being output with a
resolution of 4K/24p, 1080/50i, 1080/50p, 720/50p,
1080/24p, 1080/60i, 1080/60p or 720/60p from the
HDMI OUT terminals, the picture may be output with
an aspect ratio of 16:9, even if the TV Aspect Ratio
is set to 4:3 (Standard).
The picture may not be displayed for a while when
the resolution is switched.
When the connected device supports 3D and if a 3D
Disc is played back, the 3D output is prioritized for
output, regardless of the resolution settings. Also,
switching of resolution may not be possible while the
3D contents are playing.
When Auto is selected, the picture is output at 60
frames/second if your TV is not compatible with
1080/24p signals.
When 4K/24p, 1080/24p is selected, the signals are
output as such, even if your TV is not compatible with
4K/24p or 1080/24p signals. If the picture is not
displayed properly, use HDMI to set an output video
resolution at which the video and audio signals are
properly output.
When the unit is set to [Auto] and is playing 24p
content, the TV outputs the content at 4K/24p, if the
TV you are using supports 4K/24p output. If the
connected television set does not support 4K/24p,
then the output is made with a recommended
resolution other than 4K/24p.
When the Resolution is set to Auto, 1080p, 4K/24p
and if the resolution of output from the HDMI is
1080p, 4K/24p, then output may not occur
depending on the HDMI cable in use.
There are resolutions that cannot be output
depending on the television set in use.
BDP-X300_72-BDPX300-GBRB1_En.book 21 ページ 2016年5月24日 火曜日 午後1時10分
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer BDP-X300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer BDP-X300 in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer BDP-X300

Pioneer BDP-X300 User Manual - German, Dutch, French, Italian, Spanish - 304 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info