491874
46
Zoom out
Zoom in
Previous page
1/60
Next page
07
46
En
Registering or Changing the
password
Use this procedure to register or change the code
number required for the Parental Lock settings.
About default password of this unit
The default password is “0000”.
This unit might ask you to enter a password when you
change the password.
If you reset this unit, your password is simultaneously
changed to the default setting.
1 Select and set Security Change Password
Next Screen.
Use / to select, then press ENTER.
2 Input the password.
Use the number buttons (0 to 9) to input the number, then
press ENTER to set.
Use / to move the cursor.
3 Re-input the password.
Use the number buttons (0 to 9) to input the number, then
press ENTER to set.
Use / to move the cursor.
•To change the password, input the previously
registered password, then input the new password.
Note
We recommend making a note of the password.
If you have forgotten the password, reset the player to
the factory default setting, then register the password
again (page 47).
Changing the Parental Lock level for
viewing DVDs/BD-ROMs
Some DVD-Video discs containing scenes of violence, for
example, have Parental Lock levels (check the indications
on the disc’s jacket or elsewhere). To restrict viewing
these discs, set the player’s level to the level lower than
the discs.
1 Select and set Security Parental Control
Next Screen.
Use / to select, then press ENTER.
2 Input the password.
Use the number buttons (0 to 9) to input the number, then
press ENTER to set.
Use / to move the cursor.
3 Change the level.
Use / to change, then press ENTER to set.
Note
The level can be set to Off or between Level1 and
Level8. When set to Off, viewing is not restricted.
Changing the Country/Area code
1 Select and set Security Country Code Next
Screen.
Use / to select, then press ENTER.
2 Input the password.
Use the number buttons (0 to 9) to input the number, then
press ENTER to set.
Use / to move the cursor.
3 Change the country/area code.
Use / to change, then press ENTER to set. Refer to
page 49.
Software updating
The player’s software can be updated using one of the
methods shown below.
Connecting to the Internet.
Using a disc.
Using a USB flash drive.
Product information on this player is provided on the
Pioneer website. Check the website shown on page 6 for
update and service information on your Blu-ray disc
player.
Caution
•Do not perform the actions below while the software
is being updated. Doing so will interrupt updating and
could lead to malfunction.
Disconnecting a USB memory device
–Unplugging the power cord
On the BDP-450, pressing STANDBY/ON on the
main unit's front panel for over 5 seconds.
On the BDP-150, pressing the reset button.
•There are two processes for software updating,
downloading and updating. Both processes may take
a certain period of time.
•Other operations are defeated during software
updating. Furthermore, updating process cannot be
canceled.
On the BDP-450, when the front panel display is off,
turn it on with FL DIMMER. When updating the
player’s software with the front panel display off, do
not unplug the power cord until the unit turns off.
Updating connecting to the Internet
1 Connect to the Internet.
2 When playback is stopped, display the Home
Menu screen.
Press HOME MENU.
3 Select and set Initial Setup.
Use / to select, then press ENTER.
BDP-450_VXE8_IBD_EN.book 46 ページ 2012年6月22日 金曜日 午後2時11分
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer BDP-450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer BDP-450 in the language / languages: English as an attachment in your email.

The manual is 4,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer BDP-450

Pioneer BDP-450 User Manual - German - 60 pages

Pioneer BDP-450 User Manual - Dutch - 60 pages

Pioneer BDP-450 User Manual - Danish - 118 pages

Pioneer BDP-450 User Manual - French - 66 pages

Pioneer BDP-450 User Manual - Italian - 60 pages

Pioneer BDP-450 User Manual - Portuguese - 60 pages

Pioneer BDP-450 User Manual - Swedish - 118 pages

Pioneer BDP-450 User Manual - Turkish - 60 pages

Pioneer BDP-450 User Manual - Spanish - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info