491935
88
Zoom out
Zoom in
Previous page
1/100
Next page
Troubleshooting88
En
Troubleshooting
9
Control function
Problem Check Remedy
Control function does not
work.
Is the HDMI cable properly
connected?
To use the Control function, connect the Flat Screen TV to the
HDMI
OUT
terminal (page 41).
Is the HDMI cable you are
using a High Speed HDMI
®
/™
Cable?
Use a High Speed HDMI
®
/™ Cable. The Control function may not work
properly if an HDMI cable other than a High Speed HDMI
®
/™ Cable is
used.
Is this player connected to the
TV using an HDMI cable to
watch the picture?
If video signals are being output from a terminal other than the
HDMI
OUT
terminal, the Control function does not work. Connect to the TV
using an HDMI cable (page 41).
Does the connected device
support the Control function?
y
The Control function will not work with devices of other brands that
do not support the Control function, even when connected using an
HDMI cable.
y
The Control function will not work if devices that do not support the
Control function are connected between the Control-compatible
device and the player.
y
See page 16.
y
Even when connected to a Pioneer product compatible with the
Control function, some of the functions may not work.
Also refer to the operating instructions for the connected device.
Is Control set to On on the
connected device?
Set Control to On on the connected device. The Control function
operates when Control is set to On for all devices connected to the
HDMI OUT
terminal.
Once connections and settings of all the devices are finished, be sure
to check that the player’s picture is output to the Flat Screen TV. (Also,
check after changing the connected devices and connecting and/or
disconnecting HDMI cables.) If the player’s picture is not being output
to the Flat Screen TV, the Control function may not work properly.
For details, refer to the operating instructions of the connected device.
Network
Problem Check Remedy
y
BD-LIVE function
(connection to the
Internet) cannot be
used.
y
"No valid id file found!"
is displayed when I try
to update the software.
Perform
Connection Test
(page 81). If "Networks is OK." is displayed,
check the proxy server settings (page 81). Also, there may be a problem
with the Internet connection. Contact your Internet service provider.
Software updating is slow. Depending on the Internet connection and other conditions, some time
may be required to update the software.
A message other than
"Networks is OK."
is displayed when
Connection Test
is
performed.
Is "Network is FAILED."
displayed?
y
Check that this player and the Ethernet hub (or router with a hub
functionality) are properly connected.
y
If the IP address is obtained using the DHCP server function, check
the setting is correct at the
Information
(page 78). For details on the
DHCP server function, see the operating instructions for the Ethernet
hub (or router with a hub functionality).
y
Set the IP address manually.
y
Check the operation and settings of the DHCP server function of the
Ethernet hub (or router with hub functionality). For details on the
DHCP server function, see the operating instructions for the Ethernet
hub (or router with a hub functionality).
y
If this player has been set manually, reset the IP address of this player
or other components.
Is the Ethernet hub (or router
with a hub functionality)
operating properly?
y
Check the settings and operation the Ethernet hub (or router with a
hub functionality). For details, see the operating instructions for the
Ethernet hub.
y
Reboot the Ethernet hub (or router with a hub functionality).
Cannot access to the
component or PC
connected via network.
Internet security software
is currently installed in the
connected component.
There are cases where a component with Internet security software
installed cannot be accessed.
The audio component on
the network which has been
switched off is switched on.
Switch on the audio component on the network before switching on
this unit.
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer BCS-323 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer BCS-323 in the language / languages: English as an attachment in your email.

The manual is 8,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer BCS-323

Pioneer BCS-323 User Manual - English, German - 100 pages

Pioneer BCS-323 User Manual - Dutch - 101 pages

Pioneer BCS-323 User Manual - Danish - 280 pages

Pioneer BCS-323 User Manual - French - 108 pages

Pioneer BCS-323 User Manual - French - 100 pages

Pioneer BCS-323 User Manual - Italian - 108 pages

Pioneer BCS-323 User Manual - Italian - 100 pages

Pioneer BCS-323 User Manual - Swedish - 280 pages

Pioneer BCS-323 User Manual - Spanish - 108 pages

Pioneer BCS-323 User Manual - Spanish - 100 pages

Pioneer BCS-323 User Manual - Finnish - 280 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info