625522
172
Zoom out
Zoom in
Previous page
1/232
Next page
p Both rear speaker leads output and RCA
rear output are switched simultaneously in
this setting. (When you use the product
without RCA rear output, this setting only
applies to the rear speaker leads.)
p Rear SP can be set only when the source
is selected to Off.
1 Display the AV System Settings
screen.
= For details, refer to Displaying the screen for
AV system settings on page 170.
2 Touch [Rear SP].
Each touch of [Rear SP] changes the settings
as follows:
! Full
When no subwoofer is connected to the
rear output, select Full.
! Sub. W
When a subwoofer is connected to the rear
output, select Sub. W.
Switching the muting/
attenuation timing
You can mute the AV source volume or attenu-
ate the output signal.
p Even if this setting is Off, the navigation
system will mute or attenuate the AV
source volume when the mute signal is out-
put via MUTE lead.
1 Display the AV System Settings
screen.
= For details, refer to Displaying the screen for
AV system settings on page 170.
2 Touch [Mute].
Each touch of [Mute] changes the settings as
follows:
AVIC-Z130BT
! Guide/Tel/VR: The volume is muted or atte-
nuated according to the following condi-
tions.
When the navigation outputs the gui-
dance voice.
When you use a cellular phone via
Bluetooth technology (dialing, talking,
incoming call).
When the voice recognition mode is ac-
tivated.
! Tel/VR: The volume is muted or attenuated
according to the following conditions.
When you use a cellular phone via
Bluetooth technology (dialing, talking,
incoming call).
When the voice recognition mode is ac-
tivated.
! Off: The volume does not change.
AVIC-X930BT, AVIC-X9310BT
! Guide/Tel: The volume is muted or attenu-
ated according to the following conditions.
When the navigation outputs the gui-
dance voice.
When you use a cellular phone via
Bluetooth technology (dialing, talking,
incoming call).
! Tel: The volume is muted or attenuated
when you use a cellular phone via
Bluetooth technology (dialing, talking, in-
coming call).
! Off: The volume does not change.
p AV source volume returns to normal when
the corresponding action ends.
Switching the muting/
attenuation level
You can select the muting/attenuation level of
Mute. This setting is also effective for a
mute signal that has been received from the
MUTE lead connected to the navigation unit.
p This menu is not available when AV source
is Off.
1 Display the AV System Settings
screen.
= For details, refer to Displaying the screen for
AV system settings on page 170.
2 Touch [Mute Level].
Each touch of [Mute Level] changes the set-
tings as follows:
En
172
Chapter
32
Customizing preferences
172


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer AVIC-X930BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer AVIC-X930BT in the language / languages: English as an attachment in your email.

The manual is 13,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info