62771
149
Zoom out
Zoom in
Previous page
1/164
Next page
147
AppendixNAVI/AV
Route Setting Information
Route search specifications
Your navigation system sets a route to your desti-
nation by applying certain built-in rules to the
map data. This section provides some useful
information about how a route is set.
When a route is calculated, the route and
voice guidance for the route is automati-
cally set. Also, for day or time traffic regu-
lations, only information about traffic
regulations at the time when the route was
calculated is shown. One-way streets and
street closures may not be taken into con-
sideration. For example, if a street is open
during the morning only, but you arrive
later, it would be against the traffic regula-
tions so you cannot drive along the set
route. When driving, please follow the
actual traffic signs. Also, the system may
not know some traffic regulations.
About singular route calculation
When the calculation of only one route is set, you
can search a route option by combining the fol-
lowing conditions.
How to set the calculation conditions
Page 48
For example, when “Fast” and “Avoid Motor-
way” (On”) are combined, a route that avoids
motorways and has the shortest travel time will
be calculated and displayed on the screen.
Condition 1: whether to put priority on dis-
tance or time
Short:
Calculate a route with the shortest distance to
your destination as a priority.
Fast:
Calculate a route with the shortest travel time to
your destination as a priority.
Condition 2: whether to use motorway or not
Avoid Motorway:
Calculate a route that avoids motorways. (A route
using the motorway may be set if your destination
is far away.)
The system assumes that the driver deviated
either intentionally or inadvertently from the
route and searches for another route (intelli-
gent rerouting). Depending on the situation,
the system may search for a new route that
does not return to the original one.
The calculated route is one example of the
route to your destination decided by the navi-
gation system while taking the type of streets
or traffic regulations into account. It is not nec-
essarily an optimum route. (In some cases, you
may not be able to set the streets you want to
pass. If you want to pass a certain street, set
the way point on that street.)
The route set by your navigation system is
based on the assumption that the driver does
not know the area. Thus, streets known to local
drivers, such as small streets or special roads,
may not be used for the set route.
Some route options may become the same
route. If way points are set, only one route is
calculated.
Route setting is limited to the range of the disc
in use.
The destination is too far, there may be
instances where the route cannot be set. (If
you want to set a long-distance route going
across several areas, set way points along the
way.)
During voice guidance, turns and junctions
from the motorway are announced. However,
some junctions, turns, and other guide points
may not be announced if they are passed in
rapid succession.
It is possible that guidance may direct you off a
motorway and then back on again.
In some cases, the set route may require you to
travel in the opposite direction of your current
heading. In such cases, you are instructed to
turn around; please do so safely and in accord-
ance with local traffic rules.
In some cases, guidance may direct you past
your destination and then indicate a U-turn to
get back to it.
In some cases, a route may begin on the oppo-
site side of a railway or river from your actual
current location. If this happens, drive towards
MAN-AVIC-X3-EN.book Page 147 Wednesday, June 6, 2007 10:15 AM
149


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer AVIC-X3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer AVIC-X3 in the language / languages: English as an attachment in your email.

The manual is 8,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer AVIC-X3

Pioneer AVIC-X3 Installation Guide - English, German - 182 pages

Pioneer AVIC-X3 User Manual - German - 188 pages

Pioneer AVIC-X3 Installation Guide - Dutch - 182 pages

Pioneer AVIC-X3 User Manual - Dutch - 184 pages

Pioneer AVIC-X3 Installation Guide - French - 182 pages

Pioneer AVIC-X3 User Manual - French - 176 pages

Pioneer AVIC-X3 Installation Guide - Italian, Spanish - 182 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info