Manual Pioneer AVIC-X3 (page 111 of 164) (English)

62771

111

Zoom out

Zoom in

1/164

109

Chapter 8 Customising the AV Source SettingAV

❒ When you set staging other than “Off”, the

high pass filter (HPF) setting turns “Off”.

➲ “Using the high pass filter” ➞ Page 109

Adjusting a position effect

You can select a listener position that you want to

make as the centre of sound effects.

1 Touch “Staging” in the Sound menu.

2 Touch “Position”.

3 Touch the desired position.

Adjusting loudness

Loudness compensates for deficiencies in the

low- and high-sound ranges at low volume.

1 Touch “Loudness” in the Sound menu.

2 Touch “On” to turn loudness on.

To turn loudness off, touch “Off”.

3 Touch 4 or 6 to select a desired level.

Each time you touch 4 or 6 selects level in

the following order:

Low – Mid – High

Using subwoofer output

This navigation system is equipped with a sub-

woofer output which can be turned on or off.

❒ When the subwoofer output is on, you can

adjust the cut-off frequency, the output level

and the phase of the subwoofer.

1 Touch “Sub Woofer” in the Sound menu.

When Preout (the subwoofer controller set-

ting in Initial menu) is Full, you cannot select

“Sub Woofer”.

➲ “Setting the rear output and subwoofer

controller” ➞ Page 113

2 Touch “On” to turn subwoofer output on.

To turn subwoofer output off, touch “Off”.

3 Touch “Reverse” or “Normal” to select

the phase of subwoofer output.

4 Touch “+” or “–” to adjust the output

level of the subwoofer.

+6 to –6 is displayed as the level is increased

or decreased.

5 Touch 4 or 6 to select cut-off frequency.

Each time you touch 4 or 6 selects cut-off

frequencies in the following order:

50 – 80 – 125 (Hz)

Only frequencies lower than those in the

selected range are output from the subwoofer.

Using non fading output

When the non fading output setting is on, the

audio signal does not pass through navigation

system’s low pass filter (for the subwoofer), but is

output through the RCA output.

1 Touch “Non Fading” in the Sound menu.

Only when Preout (the subwoofer controller

setting in Initial menu) is Full, you can select

“Non Fading”.

➲ “Setting the rear output and subwoofer

controller” ➞ Page 113

2 Touch “On” to turn non fading output on.

To turn non fading output off, touch “Off”.

3 Touch “+” or “–” to adjust the output

level of the non fading.

+6 to –6 is displayed as the level is increased

or decreased.

Using the high pass filter

When you do not want low sounds from the sub-

woofer output frequency range to play from the

front or rear speakers, turn the HPF (high pass

filter) on. Only frequencies higher than those in

the selected range are output from the front or

rear speakers.

1 Touch “HPF” in the Sound menu.

2 Touch “On” to turn high pass filter on.

To turn high pass filter off, touch “Off”.

3 Touch 4 or 6 to select cut-off frequency.

Each time you touch 4 or 6 selects cut-off

frequencies in the following order:

50 – 80 – 125 (Hz)

When Preout (the subwoofer controller set-

ting in Initial menu) is Sub. W, the HPF

function is effective for front speakers only.

Audio Adjustments

MAN-AVIC-X3-EN.book Page 109 Wednesday, June 6, 2007 10:15 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer AVIC-X3 in the language / languages: English as an attachment in your email.

The manual is 8,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer AVIC-X3

Pioneer AVIC-X3 Installation Guide - English, German - 182 pages

Pioneer AVIC-X3 User Manual - German - 188 pages

Pioneer AVIC-X3 Installation Guide - Dutch - 182 pages

Pioneer AVIC-X3 User Manual - Dutch - 184 pages

Pioneer AVIC-X3 Installation Guide - French - 182 pages

Pioneer AVIC-X3 User Manual - French - 176 pages

Pioneer AVIC-X3 Installation Guide - Italian, Spanish - 182 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer AVIC-X3 Manual

Product: