491808
162
Zoom out
Zoom in
Previous page
1/193
Next page
Messages and How to React to Them
The following messages may be displayed by your navigation system.
p There are occasions when you may see
error messages other than those shown
here. In such a case, follow the instructions
given on the display.
Messages for navigation functions
Message When What to do (See)
Irregular speed pulse signal
detected. Please power off
the system and check the in-
stallation. Then, please re-
boot the system and press
OK.
If the Navigation system does not re-
ceive the vehicle speed pulse.
Consult your Pioneer dealer.
Speed pulse not connected.
Calibration will start without
speed pulse. Accuracy is not
fully ensured without speed
pulse.
The speed signal input (pink lead
wire) of the power cable is not con-
nected.
To operate with 3D hybrid mode, connect the
speed signal input (pink lead wire) of the
power cable correctly.
Although it can be operated with Simple hy-
brid mode without connecting the speed sig-
nal input, the precision of the positioning will
be less accurate.
Vibration detected. Please
power off the system and
check the installation. Then,
please re-boot the system and
press OK.
The navigation unit is installed in a
place where it may be affected by a
large vibration.
Re-install the navigation unit in a place where
the unit will not be affected by vibration.
Direction of G sensor is not
correct. Please power off the
system and check the installa-
tion. Then, please re-boot the
system and press OK.
Direction of G sensor is set incor-
rectly.
See the Installation Manual and set the direc-
tion of the navigation unit correctly.
Gyro Sensor is not working
properly. Please consult your
dealer or Pioneer service cen-
tre.
Abnormal Gyrosensor output is de-
tected.
Write down the error code shown on the
screen. Turn off the power, and then contact
your nearest Pioneer service facility.
Positioning is not possible
due to the hardware. Please
contact your dealer or Pioneer
service centre.
The location display is not possible
due to hardw are failure.
Consult your dealer.
GPS antenna problem de-
tected. Please contact your
dealer or Pioneer service cen-
tre.
The location display is not possible
due to failu re of the GPS aerial.
Consult your dealer.
This function is currently una-
vailable.
The screen cannot be displayed with
Vehicle Dynamics Display. The sen-
sor has not been taught so the sen-
sor information cannot be acquired.
If the sensor learning status reaches the Sen-
sor Initialising, the system is ready to be
used.
The vertical installation angle
is changed. Gyro Sensor cali-
bration is re-initialized.
If the mounting angle of the naviga-
tion unit has been changed.
The system initialises the sensor in order to
operate it with the maximum performance
and automatically starts re-learning.
Appendix
Engb
162
Appendix
162


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer AVIC-HD3 II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer AVIC-HD3 II in the language / languages: English as an attachment in your email.

The manual is 6,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer AVIC-HD3 II

Pioneer AVIC-HD3 II User Manual - English - 22 pages

Pioneer AVIC-HD3 II Installation Guide - English - 177 pages

Pioneer AVIC-HD3 II Installation Guide - English - 58 pages

Pioneer AVIC-HD3 II User Manual - English - 189 pages

Pioneer AVIC-HD3 II User Manual - German - 28 pages

Pioneer AVIC-HD3 II Installation Guide - German - 177 pages

Pioneer AVIC-HD3 II User Manual - German - 218 pages

Pioneer AVIC-HD3 II User Manual - Dutch - 28 pages

Pioneer AVIC-HD3 II Installation Guide - Dutch - 177 pages

Pioneer AVIC-HD3 II User Manual - Dutch - 217 pages

Pioneer AVIC-HD3 II Quick start guide - Dutch - 2 pages

Pioneer AVIC-HD3 II User Manual - French - 28 pages

Pioneer AVIC-HD3 II Installation Guide - French - 177 pages

Pioneer AVIC-HD3 II User Manual - French - 214 pages

Pioneer AVIC-HD3 II Installation Guide - Italian, Spanish - 177 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info