491808
134
Zoom out
Zoom in
Previous page
1/193
Next page
Camera for Rear view mode
[Rear View] can be displayed at all times (e.g.
when monitoring an attached trailer, etc.) as a
split screen where map information is partially
displayed. Please be aware that in this setting,
camera image is not resized to fit, and that a
portion of what is seen by the camera is not
viewable.
CAUTION
Pioneer recommends the use of a camera which
outputs mirror reversed images, otherwise screen
image may appear reversed.
p Immediately confirm whether the display
changes to a rear view camera image when
the gearstick is moved to REVERSE (R)
from another position.
p When the screen changes to full-screen
rear view camera image during normal
driving, switch to the opposite setting in
[Polarity].
p Initially, this function is set to [Off].
1 Touch [Camera Input] in
System Settings menu.
2 Touch [On] to turn rear view camera
setting on.
p Unless this setting is [On], you cannot
switch to Rear View mode.
3 Touch [Polarity] to select an appropriate
setting for polarity.
Each time you touch [Polarity] switches be-
tween the following polarity:
! Battery When the polarity of the con-
nected lead is positive while the gearstick is
in the REVERSE (R) position
! GND When the polarity of the connected
lead is negative while the gearstick is in the
REVERSE (R) position
Setting the video input
You can switch the setting according to the
connected component.
p Select [Video] to watch video of a con-
nected component as AV INPUT source.
% Touch [AV Input] in System Settings
menu.
Each touch of [AV Input] changes the set-
tings as follows:
! Off No video component is connected
! Video External video component
! EXT Pioneer external unit connected
with an RCA video cable
p When a Pioneer external unit is connected
with an IP-BUS cable, select [EXT]. When
the audio source is [EXT], the Video
image of the Pioneer external unit can be
displayed.
Switching the auxiliary setting
It is possible to use auxiliary equipment with
the navigation system as the one of sources.
Activate the auxiliary setting when using aux-
iliary equipment connected to the navigation
system.
% Touch [AUX Input] in System Settings
menu.
Touching [AUX Input] switches between [On]
and [Off].
= For details, refer to Selecting [AUX] as the
source on page 125
Switching the muting/
attenuation timing
You can mute the audio source volume or at-
tenuate the output signal. This setting is inva-
lid for the mute signal has been received from
the MUTE lead connected to the navigation
unit. (Even if this setting is [Off], the naviga-
tion system will mute or attenuate the audio
source volume when the signal is output via
MUTE lead.)
Customising the Audio Setting related with Audio Visual
Engb
134
Chapter
15
134


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer AVIC-HD3 II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer AVIC-HD3 II in the language / languages: English as an attachment in your email.

The manual is 6,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer AVIC-HD3 II

Pioneer AVIC-HD3 II User Manual - English - 22 pages

Pioneer AVIC-HD3 II Installation Guide - English - 177 pages

Pioneer AVIC-HD3 II Installation Guide - English - 58 pages

Pioneer AVIC-HD3 II User Manual - English - 189 pages

Pioneer AVIC-HD3 II User Manual - German - 28 pages

Pioneer AVIC-HD3 II Installation Guide - German - 177 pages

Pioneer AVIC-HD3 II User Manual - German - 218 pages

Pioneer AVIC-HD3 II User Manual - Dutch - 28 pages

Pioneer AVIC-HD3 II Installation Guide - Dutch - 177 pages

Pioneer AVIC-HD3 II User Manual - Dutch - 217 pages

Pioneer AVIC-HD3 II Quick start guide - Dutch - 2 pages

Pioneer AVIC-HD3 II User Manual - French - 28 pages

Pioneer AVIC-HD3 II Installation Guide - French - 177 pages

Pioneer AVIC-HD3 II User Manual - French - 214 pages

Pioneer AVIC-HD3 II Installation Guide - Italian, Spanish - 177 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info