649251
60
Zoom out
Zoom in
Previous page
1/87
Next page
60
Setting the reversed image
The default setting is “Off”.
p
This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
p
This function is available when “AV Input” is set to
Camera” or “2nd Camera Input” is set to “On”.
1 Display the “System” setting screen.
Refer to Displaying the “System” setting screen on page
58
2 Touch [Camera settings].
3 Touch [2nd Camera: Reverse video] to switch
On” or “Off”.
Setting the camera for Camera
View mode
To display Camera View at all times, “Camera View” needs to be
set to “On”. (The same mode is turned on when
is touched
on the camera view screen. The setting value is synchronized.)
The default setting is “Off”.
p
To set the rear view camera as the camera for Camera View
mode, set “Back Camera Input” to “On”.
Refer to Setting rear view camera activation on page 59
p
When using the second camera, set “AV Input” to
Camera” or “2nd Camera Input” to “On” (both settings are
synchronized).
Refer to Setting the second camera on page 59
1 Display the “System” setting screen.
Refer to Displaying the “System” setting screen on page
58
2 Touch [Camera settings].
3 Touch [Camera View] to switch “On” or “Off”.
p You can also turn this function on by touching [Camera
View] on the AV source selection screen or in the source
list.
Setting the safe mode
You can set the safe mode that regulate operating some func-
tions only when you stop your vehicle in a safe place and apply
the handbrake.
The default setting is “On”.
1 Display the “System” setting screen.
Refer to Displaying the “System” setting screen on page
58
2 Touch [Safe Mode] to switch “On” or “Off”.
Setting the demo mode
The default setting is “On”.
1 Display the “System” setting screen.
Refer to Displaying the “System” setting screen on page
58
2 Touch [Demo Mode] to switch “On” or “Off”.
Selecting the system language
p If the embedded language and the selected language setting
are not the same, text information may not display properly.
p
Some characters may not be displayed properly.
1 Display the “System” setting screen.
Refer to Displaying the “System” setting screen on page
58
2 Touch [System Language].
3 Touch the language.
Reversing the climate control
status display
When the optional vehicle bus adapter is connected, the left/
right display of the climate control status screen can be reversed
if the display does not match that of the vehicle.
The default setting is “Off”.
1 Display the “System” setting screen.
Refer to Displaying the “System” setting screen on page
58
2 Touch [Climate Reverse] to switch “On” or
Off”.
Setting the keyboard language
with the application for iPhone
You can use the keyboard in AppRadio Mode by setting the
language of the keyboard for iPhone.
p
This function is only available in AppRadio Mode on the
iPhone.
1 Display the “System” setting screen.
Refer to Displaying the “System” setting screen on page
58
2 Touch [Keyboard].
3 Touch the language.
Adjusting the response posi-
tions of the touch panel (touch
panel calibration)
F80DAB
F980DAB
F980BT
If you feel that the touch panel keys on the screen deviate from
the actual positions that respond to your touch, adjust the
response positions of the touch panel screen.
p
This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
p
Do not use sharp pointed tools such as a ballpoint or
mechanical pen, which could damage the screen.
p
Do not turn off the engine while saving the adjusted position
data.
1 Display the “System” setting screen.
Refer to Displaying the “System” setting screen on page
58
2 Touch [Touch Panel Calibration].
3 Touch two corners of the screen along the
arrows, and then touch the centres of two +
marks at the same time twice.
4 Press the button.
The adjustment results are saved.
5 Press the button once again.
Proceed to 16-point adjustment.
6 Gently touch the centre of the “+” mark dis-
played on the screen.
The target indicates the order.
When you press the button, the previous
adjustment position returns.
When you press and hold the button, the
adjustment is cancelled.
7 Press and hold the button.
The adjustment results are saved.
< CRB4818-B >
System settings
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer AVIC-F980DAB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer AVIC-F980DAB in the language / languages: English as an attachment in your email.

The manual is 16,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer AVIC-F980DAB

Pioneer AVIC-F980DAB Installation Guide - English, German - 204 pages

Pioneer AVIC-F980DAB User Manual - German - 95 pages

Pioneer AVIC-F980DAB Installation Guide - Dutch - 204 pages

Pioneer AVIC-F980DAB User Manual - Dutch - 91 pages

Pioneer AVIC-F980DAB Installation Guide - French - 204 pages

Pioneer AVIC-F980DAB User Manual - French - 93 pages

Pioneer AVIC-F980DAB Installation Guide - Italian, Spanish - 204 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info