Manual Pioneer AVIC-F980BT (page 25 of 87) (English)

649252

Zoom out

Zoom in

1/87



Trip Monitor:

Turns automatic trip log saving on or off and checks the

current size of the trip database.



Refer to “Trip Monitor” settings on page 28



AVICSYNC

Displays the connection method for AVICSYNC.

The setting value is fixed. Use this product as it is.

 Online Services:

Enables or disables the connected services.



Refer to “Online Services” settings on page 28



Start Conguration Wizard:

Modifies the basic software parameters used during the

initial setup process.



SyncTool:

Starts the synchronisation tool, which makes it possible to

update your maps.



Refer to Getting the map update on page 29

Restoring the default settings

You can restore settings or recorded content to the default

settings.

1 Press the MAP button and touch .

2 Touch , and then touch [Settings].

3 Touch .

4 Touch [Reset All Settings].

5 Touch [OK].

The recorded contents are cleared.

If you touch [Factory Reset] on the shortcut, all data rele-

vant to navigation (including the items in saved locations

and histories) are deleted and all settings are reset to their

factory defaults.

Information on each option of

“Settings”

“Route Preferences” settings

Vehicle

You can set the type of vehicle you will be using on the route.

The route is planned based on the selected vehicle type.

Route planning can also be configured to incorporate

dimension, weight, and freight hazard restrictions for maps

that contain such data.

To enhance the route accuracy, correctly select a vehicle

type that is similar to the condition of your vehicle.



Car:

— Manoeuvre restrictions and directional constraints are

taken into account when planning a route.

— Roads are used only if access for cars is allowed.

— Private roads and resident-only roads are used only if they

are inevitable to reach the destination.

— Walkways are excluded from routes.

 Emergency:

— All manoeuvres available at intersections are taken into

account.

— Directional constraints are taken into account in the same

way as travel in the opposite direction is allowed at low

speeds.

— Only private roads that need to be used to access the

destination are included.

— Walkways are excluded from routes.

 Bus:

— Manoeuvre restrictions and directional constraints are

taken into account when planning a route.

— Roads are used only if access for buses is allowed.

— Private roads, resident-only roads and walkways are

excluded from routes.



Taxi:

— Manoeuvre restrictions and directional constraints are

taken into account when planning a route.

— Roads are used only if access for taxis is allowed.

— Private roads, resident-only roads and walkways are

excluded from routes.



Lorry:

— Manoeuvre restrictions and directional constraints are

taken into account when planning a route.

— Only roads that allow lorry access are included.

— Private roads, resident-only roads and walkways are

excluded from routes.

— U-turns are not used in routes (turning around on a

divided road is not considered a U-turn for the purpose of

this system).

To edit the name and estimated maximum speed of the

selected vehicle profile, touch .

To add a new vehicle profile, touch [Add Prole]. Then select

one of the vehicle types and set the name and estimated

maximum speed.

Route Planning Method

You can change the route planning method. Route calculation

can be optimised for different situations and vehicle types by

changing the planning method. The route planning method

types are as follows.



Fast

Calculates a route with the shortest travel time to your

destination as a priority. Usually the best selection for fast

and standard cars.



Easy

Results in a route with fewer turns and no difficult manoeu-

vres. With this option, you can make this system to take, for

example, the motorway instead of a series of smaller roads

or streets.



Short

Calculates a route with the shortest distance to your destina-

tion as a priority. Usually practical for slower vehicles. Rarely

practical to use to search for shorter routes for normal

vehicles regardless of the speed.



Economical

Calculates a route that is quick and saves fuel.

Navigation Mode

You can enable or disable off-road navigation.



On-road

The route is planned towards the destination along the roads

on the map.



Off-road

The route is planned towards the destination in a straight

line, not along the roads on the map.

Motorways

When this function is turned off, the route is calculated prioritis-

ing the avoidance of motorways.

This function is useful when you want to avoid motorways when

you are driving a slow car or you are towing another vehicle.

Period Charge

When this function is turned off, the route is calculated prioritis-

ing the avoidance of toll roads.

This function is useful when you want to avoid toll roads with

restricted time access that require you to purchase a separate

pass or vignette to extend the length of time allotted for use.

This option can be enabled or disabled separately from the

pre-use toll road usage option.

Per-use Toll

When this function is turned off, the route is calculated prioritis-

ing the avoidance of per-use charged toll roads.

This function is useful when you want to avoid toll roads where

there is a per-use charge.

Ferries

When this function is turned off, the route is calculated prioritis-

ing the avoidance of ferries.

< CRB4818-B >

Customising preferences of the navigation

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer AVIC-F980BT in the language / languages: English as an attachment in your email.

The manual is 16,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer AVIC-F980BT

Pioneer AVIC-F980BT Installation Guide - English, German - 204 pages

Pioneer AVIC-F980BT User Manual - German - 95 pages

Pioneer AVIC-F980BT Installation Guide - Dutch - 204 pages

Pioneer AVIC-F980BT User Manual - Dutch - 91 pages

Pioneer AVIC-F980BT Installation Guide - French - 204 pages

Pioneer AVIC-F980BT User Manual - French - 93 pages

Pioneer AVIC-F980BT Installation Guide - Italian, Spanish - 204 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer AVIC-F980BT Manual

Product: