649249
4
Zoom out
Zoom in
Previous page
1/87
Next page
4
Notes on internal memory
Before removing the vehicle battery
If the battery is disconnected or discharged, the memory will be
erased and must be reprogrammed.
Some of the settings and recorded contents will not be reset.
Data subject to erasure
The information is erased by disconnecting the yellow lead from
the battery (or removing the battery itself).
Some of the settings and recorded contents will not be reset.
Resetting the microprocessor
CAUTION
Pressing the RESET button resets settings and recorded
contents to the factory settings.
Do not perform this operation when a device is connected
to this product.
Some of the settings and recorded contents will not be
reset.
The microprocessor must be reset under the following
conditions:
Prior to using this product for the first time after installation.
If this product fails to operate properly.
If there appears to be problems with the operation of the
system.
If your vehicle position is shown on the map with a signifi-
cant positioning error.
1 Turn the ignition switch OFF.
2 Press the RESET button with a pen tip or other
pointed implement.
Refer to Checking part names and functions on page 4
Settings and recorded contents are reset to the factory settings.
About this manual
This manual uses diagrams of actual screens to describe oper-
ations. However, the screens on some products may not match
those shown in this manual depending on the model used.
Meanings of Symbols Used in This
Manual
X0000BT
This indicates model name that are supported
the described operations.
This indicates to touch an appropriate soft key
on the touch screen.
HOLD
This indicates to touch and hold an appropri-
ate soft key on the touch screen.
This indicates that there is a reference or
supplementary for the key or screen.
Checking part names and
functions
F88DAB
F80DAB
1 2 3
4
5 6 7 8
9
b
a
F980DAB
F980BT
F9880DAB
F9880BT
1
9
7
d
2
3
4
5
6
c
8
1 LCD screen
2 VOL (+/) button
PrecautionBasic operation
< CRB4818-B >
Precaution Basic operation
4


Need help? Post your question in this forum.

Forumrules
1

Forum

pioneer-avic-f88dab

Reset search

  • I opened the port of the AVID F88DAB for the CD player (accidentally) and I do not know how to close it. Submitted on 7-5-2022 at 14:53

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer AVIC-F88DAB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer AVIC-F88DAB in the language / languages: English as an attachment in your email.

The manual is 16,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer AVIC-F88DAB

Pioneer AVIC-F88DAB Installation Guide - English, German - 204 pages

Pioneer AVIC-F88DAB User Manual - German - 95 pages

Pioneer AVIC-F88DAB Installation Guide - Dutch - 204 pages

Pioneer AVIC-F88DAB User Manual - Dutch - 91 pages

Pioneer AVIC-F88DAB Installation Guide - French - 204 pages

Pioneer AVIC-F88DAB User Manual - French - 93 pages

Pioneer AVIC-F88DAB Installation Guide - Italian, Spanish - 204 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info