649250
75
Zoom out
Zoom in
Previous page
1/87
Next page
75
Android Auto
Android Auto has stopped.
The connected device is not compatible with Android Auto.
Check if the device is compatible with Android Auto.
The startup of Android Auto failed for some reasons.
Disconnect the cable from the smartphone, and then
connect the smartphone again after a few seconds.
Restart the smartphone.
Turn the ignition switch to OFF and then to ON.
If the error message is still displayed after performing the
above action, please contact your dealer or an authorised
Pioneer Service Station.
The time set in this product is not correct.
Check if GPS signals are received and the time is correctly
set.
Bluetooth pairing failed. Please pair your Android phone
manually.
The Bluetooth pairing failed for some reasons.
Pair this product with the device manually.
Android Auto cannot connect right now. When safe to do
so, please check your Android phone.
The default settings are displayed on the screen of the
Android Auto-compatible device or images are not output
from the Android Auto-compatible device.
Park your vehicle in a safe place, and follow the instruc-
tions displayed on the screen. If the error message is
still displayed after performing a on-screen instructions,
please reconnect the device.
Positioning technology
Positioning by GPS
The Global Positioning System (GPS) uses a network of satellites
orbiting the Earth. Each of the satellites, which orbit at a height
of 68 900 000 feet (21 000 km), continually broadcasts radio
signals giving time and position information. This ensures that
signals from at least three can be picked up from any open area
on the earth’s surface.
The accuracy of the GPS information depends on how good the
reception is. When the signals are strong and reception is good,
GPS can determine latitude, longitude and altitude for accurate
positioning in three dimensions. But if signal quality is poor, only
two dimensions, latitude and longitude, can be obtained and
positioning errors are somewhat greater.
Positioning by dead reckoning
The built-in sensor in the navigation system also calculates your
position. The current location is measured by detecting driving
distance with the speed pulse, the turning direction with the gyro
sensor and inclination of the road with the G sensor.
The built-in sensor can even calculate changes of altitude, and
correct the discrepancies in the distance travelled caused by
driving along winding roads or up slopes.
If you use this navigation system with connecting the speed
pulse, the system will become more accurate than no connec-
tion of speed pulse. So you connect the speed pulse without fail
to get the accuracy of positioning.
p
The position of the speed detection circuit vary depending
on the vehicle model. For details, consult your authorised
Pioneer dealer or an installation professional.
p
Some types of vehicles may not output a speed signal while
driving at just a few kilometres per hour. In such a case, the
current location of your vehicle may not be displayed cor-
rectly while in traffic jam or in a car park.
How do GPS and dead reckoning
work together?
For maximum accuracy, your navigation system continually com-
pares GPS data with your estimated position as calculated from
the data of built-in sensor. However, if only the data from the
built-in sensor is available for a long period, positioning errors
are gradually compounded until the estimated position becomes
unreliable. For this reason, whenever GPS signals are available,
they are matched with the data of the built-in sensor and used to
correct it for improved accuracy.
p
If you use chains on your wheels for winter driving or put on
the spare wheel, errors may suddenly increase because of
difference in wheel diameter. Initialise the sensor status and
it may recover the accuracy to normal condition.
For details, refer to Clearing the status on page 62.
Map matching
As mentioned, the positioning systems used by this navigation
system are susceptible to certain errors. Their calculations may,
on occasion, place you in a location on the map where no road
exists. In this situation, the processing system understands that
vehicles travel only on roads, and can correct your position by
adjusting it to a nearby road. This is called map matching.
With map matching
Without map matching
< CRB4818-B >
Appendix
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer AVIC-F80DAB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer AVIC-F80DAB in the language / languages: English as an attachment in your email.

The manual is 16,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer AVIC-F80DAB

Pioneer AVIC-F80DAB Installation Guide - English - 204 pages

Pioneer AVIC-F80DAB User Manual - German - 95 pages

Pioneer AVIC-F80DAB Installation Guide - German, Dutch - 204 pages

Pioneer AVIC-F80DAB User Manual - Dutch - 91 pages

Pioneer AVIC-F80DAB Installation Guide - French - 204 pages

Pioneer AVIC-F80DAB User Manual - French - 93 pages

Pioneer AVIC-F80DAB Installation Guide - Italian, Spanish - 204 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info