649352
23
Zoom out
Zoom in
Previous page
1/38
Next page
23
5 Touch , , , to adjust.
The adjustments of “Brightness”, “Contrast
and “Dimmer” are stored separately when your
vehicle’s headlights are off (daytime) and on
(nighttime).
Brightness” and “Contrast” are switched auto-
matically depending on whether the vehicle’s
headlights are on or off.
Dimmer” can be changed the setting or the time
to switch it to on or off.
Setting the dimmer on page 22
The setting contents can be memorised
separately.
Displaying the “Audio” setting
screen
1 Press .
2 Touch
, and then .
The “Audio” setting screen appears.
Using fader/balance adjustment
p This function is available when “Rear Speaker Output” is
set to “Full”, and “Preout” is set to “Rear”.
1 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 23
2 Touch [Fader/Balance].
3 Touch
or to adjust the front/rear speaker
balance.
4 Touch
or to adjust the left/right speaker
balance.
pFront15” to “Rear15” is displayed as the front/rear speaker
balance moves from the front to rear.
pLeft15” to “Right15” is displayed as the left/right speaker
balance moves from the left to right.
p The default setting is “F/R 0 L/R 0”.
You can also set the fader/balance by touching
the point on the displayed table.
Using balance adjustment
p This function is available when “Rear Speaker Output” and
“Preout” are set to “Subwoofer Settings”.
1 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 23
2 Touch [Balance].
3 Touch
or to adjust the left/right speaker
balance.
pLeft15” to “Right15” is displayed as the left/right speaker
balance moves from the left to right.
p The default setting is “L/R 0”.
You can also set the fader/balance by dragging
the point on the displayed table.
Adjusting source levels
SLA (source level adjustment) lets you adjust the volume level of
each source to prevent radical changes in volume when switch-
ing between sources.
p Settings are based on the FM tuner volume level, which
remains unchanged.
p This function is not available when the FM tuner is selected
as the AV source.
1 Compare the FM tuner volume level with the
level of the source you want to adjust.
2 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 23
3 Touch [Source Level Adjuster].
4 Touch
or to adjust the source volume.
p If you directly touch the area where the cursor can be moved,
the SLA setting will be changed to the value of the touched
point.
p+4” to “–4” is displayed as the source volume is increased
or decreased.
p The default setting is “0”.
Adjusting loudness
This function compensates for deficiencies in the low-frequency
and high-frequency ranges at low volume.
p This function is not available while you make or receive a call
using the hands-free function.
1 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 23
2 Touch [Loudness].
3 Touch the item.
The following items are available:
Off (default), Low, Mid, High.
Using the subwoofer output
This product is equipped with a subwoofer output mechanism,
which can be turned on or off.
1 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 23
2 Touch [Subwoofer] to switch “On” (default) or
Off”.
Audio adjustments
< QRB3656-A >
System settings Audio adjustments
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer AVH290BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer AVH290BT in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer AVH290BT

Pioneer AVH290BT Installation Guide - English - 44 pages

Pioneer AVH290BT User Manual - German - 44 pages

Pioneer AVH290BT Installation Guide - German - 44 pages

Pioneer AVH290BT User Manual - Dutch - 43 pages

Pioneer AVH290BT Installation Guide - Dutch - 44 pages

Pioneer AVH290BT User Manual - French - 43 pages

Pioneer AVH290BT Installation Guide - French, Italian, Spanish - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info