649375
43
Zoom out
Zoom in
Previous page
1/62
Next page
43
1 Stop the vehicle in a quiet place, close all the
doors, windows and sun roof, and then turn the
engine off.
If the engine is left running, engine noise may prevent correct
Auto EQ.
p
If driving restrictions are detected during measurement,
measurement is canceled.
2 Fix the microphone for acoustical measurement
(sold separately) in the center of the headrest
of the driver’s seat, facing forward.
The Auto EQ may differ depending on where you place the micro-
phone. If desired, place the microphone on the front passenger
seat and perform Auto EQ.
3 Disconnect the iPhone or smartphone device.
4 Turn on the ignition switch (ACC ON).
If the vehicle’s air conditioner or heater is turned on, turn it off.
5 Switch the AV source to “OFF”.
Displaying the AV operation screen on page 11
6 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 40
7 Touch [A-EQ&TA Measurement].
The “A-EQ&TA Measurement” screen appears.
8 Connect the microphone for acoustical mea-
surement (sold separately) with this product.
Plug the microphone into the AUX input jack on this product.
Use an extension cable (sold separately) if the cord of the
Microphone (sold separately) is not long enough.
9 Touch [Front Left] or [Front Right] to select the
current listening position.
10 Touch [Start].
A 10-second countdown starts.
p
The Bluetooth connection is disconnected before the pro-
cess starts.
11 Exit the vehicle and keep the doors closed until
the countdown finishes.
When the countdown finishes, a measurement tone (noise)
is emitted from the speakers and the Auto EQ measurement
begins.
12 Wait until the measurement is completed.
When Auto EQ is completed, a message is displayed.
p
The measurement time varies depending on the type of
vehicle.
p
To stop the measurement, touch [Stop].
13 Store the microphone carefully in the glove
compartment or another safe place.
If the microphone is subjected to direct sunlight for an extended
period, high temperatures may cause distortion, color change
or malfunction.
Saving the sound settings
You can save to recall the following current sound settings:
fader, balance, speaker level, Graphic EQ, HPF/LPF, listening
position, crossover, time alignment.
1 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 40
2 Touch [Save Settings].
3 Touch [OK].
All of the current sound settings are saved.
When you touch [Cancel], return to the “Audio
setting screen.
Loading the sound settings
1 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 40
2 Touch [Load Settings].
3 Touch the item you want to load.
The following items are available:
AEQ Setting,Sound Setting.
p
AEQ Setting” is available only when you have already
performed Auto EQ measurement.
Adjusting the equalizer curve automatically (Auto EQ) on page
42
p
Sound Setting” is available only when you have already
saved the sound settings.
Saving the sound settings on page 43
< CRB4933-A >
Audio adjustments
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer AVH-X7700BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer AVH-X7700BT in the language / languages: English as an attachment in your email.

The manual is 12,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer AVH-X7700BT

Pioneer AVH-X7700BT Installation Guide - English, German - 52 pages

Pioneer AVH-X7700BT User Manual - German - 66 pages

Pioneer AVH-X7700BT Installation Guide - Dutch - 52 pages

Pioneer AVH-X7700BT User Manual - Dutch - 64 pages

Pioneer AVH-X7700BT Installation Guide - French - 52 pages

Pioneer AVH-X7700BT User Manual - French - 64 pages

Pioneer AVH-X7700BT Installation Guide - Italian, Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info