649361
109
Zoom out
Zoom in
Previous page
1/131
Next page
Selecting the background
display
You can display the thumbnails of available
background pictures/visuals and select one to
set your background display. The selection
can be made each for the audio source group
(playing CD, listening to Tuner, etc.), telephone
source and the movie source group (watching
DVD, AV, etc.).
1 Press ENTERTAINMENT.
Thumbnails of background pictures/visuals
appear on the display.
2 Touch one of the thumbnails that you
want to display in the background.
The selected picture/movie is displayed at the
background.
Note
In the following cases, background images from
that source cannot be selected:
! When there is no disc in the unit.
! When the AV (AV input) is not set to VIDEO
(refer to page 96).
Adjusting the response
positions of the touch panels
(Touch Panel Calibration)
If you feel that the touch panel keys on the
screen deviate from the actual positions that
respond to your touch, adjust the response po-
sitions of the touch panel. There are two ad-
justment methods: 4-point adjustment, in
which you touch four corners of the screen;
and 16-point adjustment, in which you make
fine-adjustments on the entire screen.
! Make sure to use the supplied pen for ad-
justment, and gently touch the screen. If
you press the touch panel forcefully, the
touch panel may be damaged. Do not use
a sharp pointed tool such as ballpoint pen
or a mechanical pen. Otherwise the screen
is damaged.
1 Press V.ADJUST to display
PICTURE ADJUSTMENT.
2 Press and hold V.ADJUST.
The 4-point touch panel adjustment screen ap-
pears.
3 Touch each of the arrows on the four
corners of the screen with the touch panel
adjustment pen.
# To cancel the adjustment, press and hold
V.ADJUST.
4 Press V.ADJUST to complete the 4-point
adjustment.
The adjusted position data is saved.
! Do not turn off the engine while saving the
adjusted position data.
5 Press V.ADJUST to proceed to the 16-
point adjustment.
The 16-point touch panel adjustment screen
appears.
# To cancel the adjustment, press and hold
V.ADJUST.
6 Gently touch the center of the + mark
displayed on the screen with the touch
panel adjustment pen.
After you touch all the marks, the adjusted po-
sition data is saved.
! Do not turn off the engine while saving the
adjusted position data.
7 Press and hold V.ADJUST to complete
the adjustment.
Note
If touch panel adjustment cannot be performed
properly, consult your local Pioneer dealer.
Other Functions
En
109
Section
21
Other Functions
109


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer AVH-P7800DVD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer AVH-P7800DVD in the language / languages: English as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info