649361
90
Zoom out
Zoom in
Previous page
1/131
Next page
When front speaker HPF is selected in the
network mode
Parameter What it does
FREQUENCY
Selects cut-off frequencies in the fol-
lowing order:
506380100125160
200 (Hz)
SLOPE
Selects slopes in the following order:
18 12 6 (dB/oct.)
To switch the filter of the front speaker between LPF and
HPF, touch HIGH PASS or LOW PASS.
When front speaker LPF is selected in the
network mode
Parameter What it does
FREQUENCY
Selects cut-off frequencies in the fol-
lowing order:
1.25k1.6k2k2.5k3.15k
4k5k6.3k8k10k12.5k
(Hz)
SLOPE
Selects slopes in the following order:
12 60 (pass) (dB/oct.)
# You can mute the selected speaker unit by
touching MUTE OFF. To cancel muting, touch
MUTE ON.
Notes
! Selecting cut-off frequencies sets cut-off fre-
quencies of the subwoofers L.P.F. (low-pass
filter) and that of the SMALL speaker H.P.F.
(high-pass filter). The cut-off frequency setting
has no effect if the subwoofer is set to OFF
and other speakers are set to LARGE or OFF.
! If trying to boost the bass output of the sub-
woofer doesnt do much or rather makes you
feel that the bass gets more murky, this may
indicate that the subwoofers output and bass
content you hear over other speakers cancel
each other out. To remove this problem, try
changing the phase setting for the subwoofer.
! You can store the adjusted setting in memory
by using MEMORY. For details concerning op-
eration, refer to Storing the adjusted audio set-
tings in memory on page 93.
Using the time alignment
The time alignment lets you adjust the dis-
tance between each speaker and the listening
position.
Recalling time alignment settings
% Touch TIME ALIGNMENT on the sound
setting menu to select the time alignment.
Touch TIME ALIGNMENT repeatedly to switch
between the following time alignment set-
tings:
INITIALAUTOCUSTOM1CUSTOM2
CUSTOM3LAST MEMORYOFF
# You can select LAST MEMORY only when the
adjusted time alignment setting is not memorized
in this unit.
# You cannot select AUTO when NETWORK
has been selected. (Refer to Switching the DSP
setting mode on page 105.)
# When STANDARD has been selected, you
cannot select AUTO if auto TA and EQ has not
been carried out.
Adjusting the time alignment
You can adjust the distance between each
speaker and the selected position.
! An adjusted time alignment can be memor-
ized in CUSTOM1, CUSTOM2 or
CUSTOM3.
1 Recall the time alignment setting you
want to adjust.
Refer to Recalling time alignment settings on
this page.
Audio Adjustments
En
90
Section
17
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer AVH-P7800DVD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer AVH-P7800DVD in the language / languages: English as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info