649361
77
Zoom out
Zoom in
Previous page
1/131
Next page
Introduction to built-in DSP
features
Important
We recommend that you record the settings in
the sheet on page 122 after you have completed
audio adjustments.
DSP modes
This unit features two DSP modes: the net-
work mode and the standard mode. You can
switch between DSP modes as desired. Initi-
ally, the DSP mode is set to the standard
mode. (Refer to Switching the DSP setting
mode on page 105.)
! Auto TA and EQ can be used for the stan-
dard mode only. (Refer to Auto TA and EQ
(auto-time alignment and auto-equalizing)
on page 93 and Using the auto-equalizer on
page 92.)
! A 2-way front speaker output can be used
for the network mode only.
Note
Switching the DSP mode erases the current ad-
justing audio settings (LAST MEMORY). If
needed, memorize it into custom settings
(CUSTOM1, CUSTOM2 or CUSTOM3).
Output channel modes
(2CH/Multi CH)
This unit has two output channel modes for
each DSP mode: the 2-channel mode and the
multi-channel mode. You can switch between
output channel modes depending on the
source that you have selected.
! Dolby Pro Logic II/Dolby Digital EX and DTS
Neo:6 (Dolby/DTS) can be used for multi-
channel mode only.
! Graphic equalizer (GRAPHIC EQ) can be
used for 2-channel mode only.
! Parametric equalizer (PARAMETRIC EQ)
can be used for multi-channel mode only.
Note
When selecting 2-channel mode, audio does not
be output from front center and rear center
speakers.
Sound settings (SETTING1,
SETTING2 or SETTING3)
Created acoustic sound field can be stored in
this unit and called up easily. Additionally, this
unit stores the sound setting and output chan-
nel information for each source group. Chan-
ging the source switches sound setting and
output channel information for each source
group at the same time.
Three types of sound settings can be set and
stored for both 2-channel mode and multi-
channel mode independently. Moreover,
sound settings can be stored for both the net-
work mode and the standard mode. Therefore,
a total of 12 types of sound settings can be set
and stored.
! Auto TA and EQ can be performed only
when the standard mode is selected. Per-
forming Auto TA and EQ creates auto set-
tings (AUTO) which are adjusted finely for
both 2-channel mode and multi-channel
mode. However, AUTO cannot be custo-
mized.
Source groups
Each source stores both sound settings and
output channels information. When a DVD
player (built-in or optional) is selected as a
source, the each medium stores these settings
independently.
Media of DVD player are listed as follows:
! DVD audio
Audio Adjustments
En
77
Section
17
Audio Adjustments
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer AVH-P7800DVD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer AVH-P7800DVD in the language / languages: English as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info