Manual Pioneer AVH-P5900DVD (page 16 of 102) (English)

454827

Zoom out

Zoom in

1/102

Operation Manual

DVD RDS AV RECEIVER

AVH-P5900DVD

English

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate

your model properly. After you have finished reading the instructions, keep this man-

ual in a safe place for futur e reference.

Be sure to read this

! Playable discs 8

! DVD video disc region numbers 8

! When an operation is prohibited 12

Precautions

IMPORTANT SAFEGUARDS 6

To ensure safe driving 6

– When using a display connected to

REAR MONITOR OUTPUT 7

To avoid battery exhaustion 7

Before You Start

About this unit 8

– Playable discs 8

– DVD video disc region numbers 8

About this manual 9

Visit our website 9

Features 9

– About WMA 10

– About MP3 11

– About AAC 11

– About DivX 11

To protect the LCD screen 11

For viewing LCD comfortably 11

– Changing the wide screen size 11

– Changing the picture adjustment 12

What the marks on DVDs indicate 12

– When an operation is prohibited 12

Protecting your unit from theft 12

– Removing the front panel 12

– Attaching the front panel 13

Resetting the microprocessor 13

Feature demo mode 13

Operating this unit

What’s What 14

– Head unit 14

– Optional remote control 15

Basic Operations 15

– Power ON/OFF 15

– Selecting a source 15

– Adjusting the volume 16

– Touch panel key basic operation 16

– Opening and closing the LCD

panel 17

Radio 19

– Basic Operations 19

– Storing and recalling broadcast

frequencies 20

– Introduction of advanced

operations 20

– Storing the strongest broadcast

frequencies 20

– Tuning in strong signals 20

– Selecting alternative frequencies 21

– Receiving traffic announcements 22

– Using PTY functions 22

– Using radio text 23

– PTY list 23

Built-in DVD player 24

– Basic Operations 24

– Basic playback controls 25

– Switching the media file type 26

– Operating the DVD menu 26

– PBC playback 26

– Playing DivX® VOD content 27

– Skipping back or forward to another

title 27

– Selecting the play mode 27

– CM skip/CM back 27

– Resume playback (Bookmark) 28

– Searching for the part you want to

play 28

– Changing audio language during

playback (Multi-audio) 28

Contents

– Changing the subtitle language during

playback (Multi-subtitle) 29

– Changing the viewing angle during

playback (Multi-angle) 29

– Frame-by-frame playback 29

– Slow motion playback 29

– Return to the specified scene 30

– Automatic playback of DVDs 30

– Text information 31

– Selecting tracks from the track list 31

– Selecting files from the file name

list 31

– Selecting titles from the title list 32

– Introduction of advanced

operations 32

– Repeating play 32

– Playing tracks in random order 32

– Scanning tracks or folders 33

– Selecting audio output 33

– Using compression 33

Playing songs on iPod 34

– Basic Operations 34

– Browsing for a song 34

– Displaying text information on

iPod 35

– Repeating play 35

– Playing songs in a random order

(shuffle) 35

– Playing all songs in a random order

(shuffle all) 35

– Pausing a song 36

– Changing audiobook speed 36

– Playing video 36

Audio Adjustments 36

– Introduction of audio adjustments 36

– Using balance adjustment 36

– Using the equalizer 37

– Adjusting loudness 38

– Using subwoofer output 38

– Boosting the bass 39

– Using the high pass filter 39

– Adjusting source levels 39

– Staging for car environment 39

Setting up the DVD player 40

– Introduction of DVD setup

adjustments 40

– Setting the subtitle language 40

– Setting the audio language 41

– Setting the menu language 41

– Switching the assist subtitle on or

off 42

– Setting the angle icon display 42

– Setting the aspect ratio 42

– Setting the parental lock 42

– Setting the DivX subtitle file 43

– Displaying your DivX® VOD

registration code 44

– Setting for digital output 44

Initial Settings 44

– Adjusting initial settings 44

– Switching the auxiliary setting 45

– Setting the rear output and subwoofer

controller 45

– Setting the FM tuning step 45

– Selecting the OSD color 46

– Selecting the illumination color 46

– Switching Auto PI Seek 46

– Selecting the display language 46

– Switching the sound muting/

attenuation 46

– Switching the warning tone 46

– Setting the TV signal 47

– Entering PIN code for Bluetooth

wireless connection 47

– Correcting distorted sound 47

– Resetting the audio functions 47

Other Functions 48

Contents

– Introduction of system

adjustments 48

– Changing the wide screen mode 48

– Changing the picture adjustment 49

– Selecting the background display 50

– Setting the AV input 50

– Setting the clock 50

– Setting for rear view camera (back up

camera) 51

– Adjusting the LCD panel slide

position 51

– Setting the automatic open

function 52

– Switching the iPod charge setting 52

– Adjusting the response positions of the

touch panels (Touch Panel

Calibration) 52

– Using the AUX source 53

– Using the PGM button 54

Available accessories

Playing songs on USB portable audio player/

USB memory 55

– Basic Operations 55

– Pausing compressed audio

playback 55

– Introduction of advanced

operations 55

– Displaying text information of an audio

file 56

– Selecting files from the file name

list 56

Bluetooth Audio 56

– Basic Operations 56

– Pausing playback 57

– Introduction of advanced

operations 57

– Connecting a Bluetooth audio

player 57

– Disconnecting a Bluetooth audio

player 58

– Displaying BD (Bluetooth Device)

address 58

Bluetooth Telephone 58

– Basic Operations 58

– Setting up for hands-free phoning 59

– Making a phone call 60

– Taking a phone call 60

– Introduction of advanced

operations 60

– Connecting a cellular phone 60

– Disconnecting a cellular phone 61

– Registering connected cellular

phone 61

– Deleting a registered phone 61

– Connecting to a registered cellular

phone 62

– Using the Phone Book 62

– Using the Call History 64

– Using preset numbers 64

– Making a call by entering phone

number 65

– Clearing memory 65

– Setting the automatic answering 65

– Setting the automatic rejecting 65

– Switching the ring tone 65

– Echo canceling and noise

reduction 65

– Displaying BD (Bluetooth Device)

address 66

Multi-CD Player 66

– Basic Operations 66

– Selecting a disc 67

– Pausing CD playback 67

– Introduction of advanced

operations 67

– Using CD TEXT functions 67

DVD Player 68

Contents

– Basic Operations 68

– Selecting a disc 69

– Selecting a folder 69

– Pausing disc playback 69

– Introduction of advanced

operations 69

TV tuner 71

– Basic Operations 71

– Storing and recalling broadcast

stations 71

– Introduction of advanced

operations 72

– Storing the strongest broadcast

stations sequentially 72

– Selecting the area group 72

Digital Signal Processor 73

– Introduction of DSP adjustments 73

– Using the sound field control 73

– Using the position selector 74

– Using balance adjustment 74

– Adjusting source levels 75

– Using the dynamic range control 75

– Using the down-mix function 75

– Using the direct control 76

– Using the Dolby Pro Logic II 76

– Setting the speaker setting 77

– Adjusting the speaker output

levels 78

– Selecting a cross-over frequency 78

– Adjusting the speaker output levels

using a test tone 79

– Using the time alignment 79

– Using the equalizer 80

– Using the auto-equalizer 82

– Auto TA and EQ (auto-time alignment

and auto-equalizing) 82

Additional Information

Troubleshooting 85

Error messages 87

Understanding auto TA and EQ error

messages 88

Handling guideline of discs and player 90

DVD discs 90

DVD-R/DVD-RW discs 90

AVCHD recorded discs 91

CD-R/CD-RW discs 91

Dual Discs 91

Compressed audio files on the disc 91

– Example of a hierarchy 92

– Compressed audio compatibility 92

DivX video files 92

– DivX compatibility 93

About handling the iPod 93

– About iPod settings 93

Using the display correctly 93

– Handling the display 93

– Liquid crystal display (LCD) screen 94

– Keeping the display in good

condition 94

– Small fluorescent tube 94

Language code chart for DVD 95

Terms 96

Specifications 99

Index 101

Contents

IMPORTANT SAFEGUARDS

Please read all of these instructions regarding

your display and retain them for future refer-

ence.

1 Read this manual fully and carefully be-

fore operating your display.

2 Keep this manual handy as a reference for

operating procedures and safety informa-

tion.

3 Pay close attention to all warnings in this

manual and follow the instructions care-

fully.

4 Do not allow other persons to use this sys-

tem until they have read and understood

the operating instructions.

5 Do not install the display where it may (i)

obstruct the driver’s vision, (ii) impair the

performance of any of the vehicle’s oper-

ating systems or safety features, includ-

ing air bags, hazard lamp buttons or (iii)

impair the driver’s ability to safely oper-

ate the vehicle.

6 Do not operate this display if doing so in

any way will divert your attention from

the safe operation of your vehicle. Always

observe safe driving rules and follow all

existing traffic regulations. If you experi-

ence difficulty in operating the system or

reading the display, park your vehicle in a

safe location and make necessary adjust-

ments.

7 Please remember to wear your seat belt at

all times while operating your vehicle. If

you are ever in an accident, your injuries

can be considerably more severe if your

seat belt is not properly buckled.

8 Never use headphones while driving.

9 To promote safety, certain functions are

disabled unless the parking brake is on,

and the vehicle is not in motion.

10 Never set the volume of your display so

high that you cannot hear outside traffic

and emergency vehicles.

WARNING

! Do not attempt to install or service your

display by yourself. Installation or servi-

cing of the display by persons without

training and experience in electronic

equipment and automotive accessories

may be dangerous and could expose you

to the risk of electric shock or other

hazards.

To ensure safe driving

WARNING

! LIGHT GREEN LEAD AT POWER CON-

NECTOR IS DESIGNED TO DETECT

PARKED STATUS AND MUST BE CON-

NECTED TO THE POWER SUPPLY SIDE

OF THE PARKING BRAKE SWITCH. IM-

PROPER CONNECTION OR USE OF

THIS LEAD MAY VIOLATE APPLICABLE

LAW AND MAY RESULT IN SERIOUS IN-

JURY OR DAMAGE.

! To avoid the risk of damage and injury and the

potential violation of applicable laws, this unit

is not for use with a video screen that is visible

to the driver.

! To avoid the risk of accident and the potential

violation of applicable laws, the front DVD or

TV (sold separately) feature should never be

used while the vehicle is being driven. Also,

rear displays should not be in a location

where it is a visible distraction to the driver.

! In some countries or states the viewing of

images on a display inside a vehicle even by

persons other than the driver may be illegal.

Where such regulations apply, they must be

obeyed and this unit’s DVD features should

not be used.

Precautions

Section

When you attempt to watch a DVD, Video CD

or TV while driving, the warning Viewing of

front seat video source while driving is

strictly prohibited. will appear on the front

display.

To watch a DVD, Video CD or TV on the front

display, park your vehicle in a safe place and

apply the parking brake.

When using a display connected

to REAR MONITOR OUTPUT

This unit’s REAR MONITOR OUTPUT is for

connection of a display to enable passengers

in the rear seats to watch the DVD or TV.

WARNING

NEVER install the rear display in a location that

enables the driver to watch the DVD or TV while

driving.

To avoid battery exhaustion

Be sure to run the vehicle engine while using

this unit. Using this unit without running the

engine can result in battery drainage.

! When no power is supplied to this unit be-

cause of a replacement of the vehicle bat-

tery or for some similar reason, the

microcomputer of this unit is returned to

its initial condition. We recommend that

you transcribe the audio adjustment data.

WARNING

Do not use with vehicles that do not feature an

ACC position.

Precautions

Section

Precautions

About this unit

The tuner frequencies on this unit are allo-

cated for use in Europe, Asia, the Middle East,

Africa and Oceania. Use in other areas may re-

sult in poor reception. The RDS (radio data

system) function operates only in areas with

FM stations broadcasting RDS signals.

Important

Language that is used for the function menu can

be changed. Initially, language is set to Russian.

(Refer to Selecting the display language on page

46.)

CAUTION

! Do not allow this unit to come into contact

with liquids. Electrical shock could result.

Also, this unit damage, smoke, and overheat

could result from contact with liquids.

! Keep this manual handy as a reference for op-

erating procedures and precautions.

! Always keep the volume low enough so that

you can hear sounds from outside the vehicle.

! Protect this unit from moisture.

! If the battery is disconnected or discharged,

the preset memory will be erased and must be

reprogrammed.

! If this unit does not operate properly, contact

your dealer or nearest authorized Pioneer Ser-

vice Station.

Playable discs

DVD, Video CD and CD discs that display the

logos shown below can be played back on this

player.

DVD video

Video CD

Notes

is a trademark of DVD Format/Logo

Licensing Corporation.

! This player can only play back discs bearing

the marks shown above.

DVD video disc region numbers

DVD video discs that have incompatible region

numbers cannot be played on this player. The

region number of the player can be found on

the bottom of this unit.

Before You Start

Section

The illustration below shows the regions and

corresponding region numbers.

About this manual

This unit features a number of sophisticated

functions ensuring superior reception and op-

eration. All the functions have been designed

for the easiest possible use, but many are not

self-explanatory. This operation manual will

help you benefit fully from this unit’s potential

and to maximize your listening enjoyment.

We recommend that you familiarize yourself

with the functions and their operation by read-

ing through the manual before you begin

using this unit. It is especially important that

you read and observe WARNINGs and CAU-

TIONs in this manual.

Visit our website

Visit us at the following site:

! Register your product. We will keep the de-

tails of your purchase on file to help you

refer to this information in the event of an

insurance claim such as loss or theft.

! We offer the latest information about

Pioneer Corporation on our website.

Features

Touch panel key operation

It is possible to operate this unit by using

touch panel key.

DVD-R/RW compatibility

It is possible to play back DVD-R/RW discs re-

corded with the video format and Video Re-

cording format. (Refer to DVD-R/DVD-RW discs

on page 90.)

Video CDs featuring PBC compatibility

It is possible to play back Video CDs featuring

PBC (playback control).

WMA, MP3 and AAC compatibility

Refer to Compressed audio compatibility on

page 92.

DivX

video compatibility

Refer to DivX compatibility on page 93.

Dolby Digital/DTS compatibility

When using this unit with a Pioneer multi-

channel processor, you can enjoy the atmo-

sphere and excitement provided by DVD movie

and music software featuring 5.1 channel re-

cordings.

! Manufactured under license from Dolby

Laboratories. “Dolby”, “Pro Logic”, and the

double-D symbol are trademarks of Dolby

Laboratories.

Before You Start

Section

Before You Start

! “DTS” and “DTS Digital Out” are registered

trademarks of DTS, Inc.

iPod

compatibility

This unit can control and listen to songs on an

iPod.

! This unit supports only an iPod with Dock

Connector.

! This unit controls the iPod listed below.

— iPod fifth generation (sof tware version

1.2 or later)

— iPod nano (second generation) (soft-

ware version 1.0.2 or later)

— iPod nano (software version 1.2 or later)

— iPod photo (software version 1.2.1 or

later)

— iPod (click wheel) (software version 3.1.1

or later)

— iPod mini (software version 1.4.1 or

later)

— iPod (dock connector) (software version

2.3 or later)

To obtain maximum performance, we re-

commend that you use the latest version of

the iPod software.

! Operations may vary depending on the soft-

ware version of iPod.

! iPod is a trademark of Apple Computer,

Inc., registered in the U.S. and other coun-

tries.

Note

This product incorporates copyright protection

technology that is protected by method claims of

certain U.S. patents and other intellectual prop-

erty rights owned by Macrovision Corporation

and other rights owners. Use of this copyright

protection technology must be authorized by

Macrovision Corporation, and is intended for

home and other limited viewing uses only unless

otherwise authorized by Macrovision Corporation.

Reverse engineering or disassembly is prohibited.

About WMA

The Windows Media™ logo printed on the box

indicates that this unit can play back WMA

data.

WMA is short for Windows Media Audio and

refers to an audio compression technology

that is developed by Microsoft Corporation.

WMA data can be encoded by using Windows

Media Player version 7 or later.

! Windows Media and the Windows logo are

trademarks or registered trademarks of

Microsoft Corporation in the United States

and/or other countries.

! This unit may not operate correctly depend-

ing on the application used to encode

WMA files.

Before You Start

Section

About MP3

Supply of this product only conveys a license

for private, non-commercial use and does not

convey a license nor imply any right to use

this product in any commercial (i.e. revenue-

generating) real time broadcasting (terrestrial,

satellite, cable and/or any other media), broad-

casting/streaming via internet, intranets and/

or other networks or in other electronic con-

tent distribution systems, such as pay-audio or

audio-on-demand applications. An indepen-

dent license for such use is required. For de-

tails, please visit

http://www.mp3licensing.com.

About AAC

AAC is short for Advanced Audio Coding and

refers to an audio compression technology

standard used with MPEG 2 and MPEG 4.

Several applications can be used to encode

AAC files, but file formats and extensions dif-

fer depending on the application which is

used to encode.

This unit plays back AAC files encoded by

iTunes

version 6.0.5.

! iTunes is a trademark of Apple Computer,

Inc., registered in the U.S. and other coun-

tries.

About DivX

DivX is a compressed digital video format cre-

ated by the DivX

video codec from DivX, Inc.

This unit can play DivX video files recorded on

CD-R/RW/ROM and DVD-R/RW/ROM discs.

Keeping the same terminology as DVD video,

individual DivX video files are called “Titles”.

When naming files/titles on a CD-R/RW or a

DVD-R/RW disc prior to burning, keep in mind

that by default they will be played in alphabeti-

cal order.

Official DivX

Certified product

Plays all versions of DivX

video (including

DivX

6) with standard playback of DivX

media files

! DivX, DivX Certified, and associated logos

are trademarks of DivX, Inc. and are used

under license.

To protect the LCD screen

! Do not allow direct sunlight to fall on the

display when this unit is not being used.

Extended exposure to direct sunlight can

result in LCD screen malfunction due to

the resulting high temperatures.

! When using a cellular phone, keep the an-

tenna of the cellular phone away from the

display to prevent disruption of the video by

the appearance of spots, colored stripes,

etc.

! Never touch the screen with anything be-

sides your finger when operating the touch

panel function. The screen can scratch

easily.

For viewing LCD comfortably

Due to its construction, the viewing angle of

the LCD screen is limited. You can adjust it by

changing either screen size or picture adjust-

ment.

Changing the wide screen size

By changing the screen size from 4:3 to 16:9,

you can adjust the screen so that the screen

can fit to the video image you are playing.

Before You Start

Section

Before You Start

For details concerning operation, refer to

Changing the wide screen mode on page 48.

Changing the picture adjustment

You can make the best adjustment to the pic-

ture display by changing BRIGHTNESS,

CONTRAST, COLOR and HUE. You can also

dim or enlight the overall picture image using

DIMMER.

For details concerning operation, refer to

Changing the picture adjustment on page

49.

What the mark s on DVDs

indicate

The marks below may be found on DVD disc

labels and packages. They indicate the type of

images and audio recorded on the disc, and

the functions you can use.

Mark Meaning

Indicates the number of audio sys-

tems.

Indicates the number of subtitle lan-

guages.

Indicates the number of viewing an-

gles.

16 : 9 LB

Indicates the picture size (aspect ratio:

screen width-to -height ratio) type.

ALL

Indicates the number of the region

where playback is possible.

When an operation is prohibited

When you are watching a DVD and attempt to

perform an operation, it may not be performed

because of the programming on the disc.

When this happens, the icon

appears on

the screen.

! The icon

may not appear with certain

discs.

Protecting your unit from

theft

The front panel can be detached to deter theft.

! If the front panel is not detached from the

head unit within four seconds of turning off

the ignition, a warning tone will sound.

! You can turn off the warning tone. See

Switching the warning tone on page 46.

Important

! Handle gently when removing or attaching

the front panel.

! Avoid subjecting the front panel to excessive

shocks.

! Keep the front panel out of direct sunlight and

high temperatures.

! If removed, replace the front panel on the unit

before starting up your vehicle.

Removing the front panel

1 Press DETACH to release the front

panel.

2 Grab the front panel and remove.

Take care not to grip it too tightly or to drop

the front panel and protect it from contact

with water or other fluids to prevent perma-

nent damage.

Before You Start

Section

3 Put the front panel into provided pro-

tective case for safe keeping.

Attaching the front panel

% Replace the front panel by clipping it

into place.

Resetting the microprocessor

Pressing RESET lets you reset the micropro-

cessor to its initial settings without changing

the bookmark information.

The microprocessor must be reset under the

following conditions:

! Prior to using this unit for the first time

after installation

! If the unit fails to operate properly

! When strange or incorrect messages ap-

pear on the display

1 Turn the ignition switch OFF.

2 Press RESET with a pen tip or other

pointed instrument.

RESET button

Note

After completing connections or when you want

to erase all memorized settings or return the unit

to its initial (factory) settings, switch your engine

ON or set the ignition switch to ACC ON before

pressing RESET.

Feature demo mode

The feature demo automatically starts when

you select the source OFF. The demo con-

tinues while the ignition switch is set to ACC

or ON. To cancel the feature demo, press and

hold VOLUME/ATT. To restart the feature

demo, press and hold VOLUME/ATT again.

Remember that if the feature demo continues

operating when the car engine is turned off, it

may drain battery power.

Important

The red lead (ACC) of this unit should be con-

nected to a terminal coupled with ignition switch

on/off operations. If this is not done, the vehicle

battery may be drained.

Before You Start

Section

Before You Start

What’s What

Head unit

1 DISPLAY button

Press to turn the information display on or

off when the video is displayed.

Press and hold to switch between the dis-

plays on the sub-display.

! When a rear view camera video is dis-

played, press and hold DISPLAY return

to the source display.

2 TA/NEWS button

Press to turn traffic announcements func-

tion on or off.

Press and hold to turn NEWS function on or

off.

3 Ambient light sensor

Senses ambient light. This system automati-

cally adjusts the brightness of the display to

compensate for ambient light.

4 FLIP DOWN button

Press to turn the LCD panel horizontal tem-

porarily from upright position.

5 OPEN/CLOSE button

Press to open or close the LCD panel.

6 RESET button

Press to return to the factory settings (initial

settings).

7 DETACH button

Press to remove the front panel from the

head unit.

Operating this unit

Section

8 EJECT button

Press to eject a disc from this unit.

9 o/p button

Press to do manual seek tuning, fast for-

ward, reverse and track search controls.

a BAND/ESC button

Press to select among three FM bands and

MW/LW bands and to cancel the control

mode of functions.

b SOURCE button

This unit is turned on by selecting a source.

Press to cycle through all the available

sources.

c Disc loading slot

Insert a disc to play.

d VOLUME/ATT button

Rotate it to increase or decrease the vo-

lume.

Press to quickly lower the volume level, by

about 90%. Press once more to return to the

original volume level.

Optional remote control

The remote control CD-R55 is sold separately.

For details concerning operations, see the re-

mote control manual.

Basic Operations

Power ON/OFF

1 Source icon

Turning the unit on

% When using the touch panel keys,

touch the source icon and then touch the

desired source name.

The source names are displayed and select-

able ones are highlighted.

% When using the button, press SOURCE

to tur n the unit on.

Turning the unit off

% When using the touch panel keys,

touch the source icon and then touch OFF.

# When the source icon is not displayed, you

can display it by touching the screen.

% When using the button, press SOURCE

and hold until the unit turns off.

Selecting a source

You can select a source you want to listen to.

To switch to the DVD player, load a disc in the

unit. To switch to the iPod, connect an iPod to

this unit.

Operating this unit

Section

Operating this unit

% When using the touch panel keys,

touch the source icon and then touch the

desired source name.

The source names are displayed and select-

able ones are highlighted.

! DVD – Built-in DVD player

! RADIO – Radio

! iPod – iPod

! USB – USB portable audio player/USB

memory

! TEL – BT telephone

! BT Audio – Bluetooth audio player

! S-DVD – DVD player/multi-DVD player

! MCD – Multi-CD player

! AUX 1 – AUX 1

! AUX 2 – AUX 2

! AV – AV input

! TV – Television

! EXT 1 – External unit 1

! EXT 2 – External unit 2

! OFF – Turn the unit off

# When the source icon is not displayed, you

can display it by touching the screen.

# While operating the menu, you cannot select

a source by touching the source icon.

# To close source select menu, touch ESC.

% When using the button, press SOURCE

repeatedly to select a desired source.

Notes

! In the following cases, the sound source will

not change:

— When there is no unit corresponding to the

selected source connected to this unit.

— When there is no disc or magazine in the

player.

— When the AUX (auxiliary input) is set to off

(refer to page 45).

— When the AV (AV input) is not set to

VIDEO (refer to page 50).

! AUX1 is set to VIDEO by default. Set the AUX1

to OFF when not in use (refer to Switching the

auxiliary setting on page 45).

! External unit refers to a Pioneer product (such

as one available in the future) that, although

incompatible as a source, enables control of

basic functions by this unit. Two external units

can be controlled by this unit. When two exter-

nal units are connected, the allocation of

them to external unit 1 or external unit 2 is

automatically set by this unit.

! When this unit’s blue/white lead is connected

to the vehicle’s auto-antenna relay control

terminal, the vehicle’s antenna extends when

this unit’s source is turned on. To retract the

antenna, turn the source off.

Adjusting the volume

% Use VOLUME/ATT to adjust the sound

level.

Rotate VOLUME/ATT to increase or decrease

the volume.

Touch panel key basic operation

Activating the touch panel keys

1 TILT ( / ) keys

Touch to adjust the LCD panel angle.

2 Touch panel keys

Touch to do various operations.

1 Touch the screen to activate the touch

panel keys corresponding to each source.

The touch panel keys appear on the display.

# To go to the next group of touch panel keys,

touch NEXT.

Operating this unit

Section

# To return to the previous group of touch panel

keys, touch PREV.

2 Touch HIDE to hide the touch panel

keys.

Note

If you do not use the touch panel keys within 30

seconds, they will be hidden automatically when

selecting video sources.

Operating the menu

1 FUNCTION MENU key

Touch to select functions for each source.

2 AUDIO MENU key

Touch to select various sound quality controls.

3 SYSTEM MENU key

Touch to select various setup functions.

4 ESC key

Touch to cancel the control mode of func-

tions.

1 Touch A.MENU to display MENU.

The menu names are displayed and operable

ones are highlighted.

# When A.MENU is not displayed, you can dis-

play it by touching the screen.

2 Touch the desired key to display the

function names you want to operate.

# To go to the next group of function names,

touch NEXT.

# To return to the previous group of function

names, touch PREV.

3 Touch ESC to return to the display of

each source.

Opening and closing the LCD panel

The LCD panel will be opened or closed auto-

matically with the turning of the ignition

switch on or off. You can turn off the automatic

close/open function. (Refer to page 52.)

! Do not close the LCD panel with hands by

force. That cause malfunction.

! The automatic close/open function will op-

erate the display as follows.

— When the ignition switch is turned OFF

while the LCD panel is opened, the LCD

panel will close after six seconds.

— When the ignition switch is turned ON

again (or turned to ACC), the LCD panel

will be opened automatically.

— Removing or attaching the front panel

will automatically close or open the LCD

panel. (Refer to page 12.)

! When the ignition switch is turned OFF

after the LCD panel has been closed, turn-

ing the ignition switch ON again (or turning

it to ACC) will not open the LCD panel. In

this case, press OPEN/CLOSE to open the

LCD panel.

! When closing the LCD panel, check to

make sure that it has closed completely. If

the LCD panel has stopped halfway, leaving

it like this could result in damage.

CAUTION

Keep hands and fingers clear of the unit when

opening, closing, or adjusting the LCD panel. Be

especially cautious of children’s hands and fin-

gers.

Operating this unit

Section

Operating this unit

% Press OPEN/CLOSE to open the LCD

panel.

# To close the LCD panel, press OPEN/CLOSE

again.

Adjusting the LCD panel angle

Important

! If you can hear the LCD panel knocking

against your vehicle’s console or dashboard,

touch TILT (

) to move the LCD panel a little

forward.

! When adjusting the LCD panel angle, be sure

to touch TILT (

/ ). Forcibly adjusting the

LCD panel by hand may damage it.

% Touch TILT ( / ) to adjust the LCD

panel to an easily viewable angle.

The LCD panel angle continues changing as

long as you touch TILT (

/ ) and hold.

# The adjusted LCD panel angle will be memor-

ized and automatically returned to the next time

the LCD panel is opened.

Turning the LCD panel horizontal

When the LCD panel is upright and it hinders

the operation of the air conditioner, the panel

can be turned horizontal temporarily.

% Press FLIP DOWN to turn the LCD panel

horizontal.

# To return to original position, press

FLIP DOWN again.

# The LCD panel returns to the original position

automatically with beeping sound 10 seconds

after operation.

Operating this unit

Section

Radio

Basic Operations

This unit’s AF (alternative frequencies search)

function can be turned on and off. AF should

be off for normal tuning operation (refer to

page 21).

RDS

RDS (radio data system) contains inaudible in-

formations that helps searching of the radio

stations.

! RDS service may not be provided by all sta-

tions.

! RDS functions such as AF and TA are only

active when your radio is tuned to an RDS

station.

1 Source icon

2 Band indicator

3 Preset number indicator

4 Program service name

5 NEWS indicator

Shows when the set news program is re-

ceived.

6 TRAFFIC indicator

Shows when a TP station is tuned in.

7 TEXT indicator

Shows when the radio text is received.

8 PTY label indicator

9 Stereo (5) indicator

Shows when the selected frequency is being

broadcast in stereo.

Non-RDS or MW/LW

1 Source icon

2 Band indicator

3 Preset number indicator

4 Frequency indicator

5 LOCAL indicator

Shows when local seek tuning is on.

6 Stereo (5) indicator

Shows when the selected frequency is being

broadcast in stereo.

1 Touch the source icon and then touch

RADIO to select the radio.

2 Touch BAND to select a band.

Touch BAND until the desired band (FM1,

FM2, FM3 for FM or MW/LW) is displayed.

3 To perform manual tuning, briefly

touch c or d.

# You can also perform manual tuning by press-

ing o or p.

4 To perform seek tuning, keep touching

c or d for about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

# You can cancel seek tuning by briefly touching

either c or d.

# If you keep touching c or d you can skip sta-

tions. Seek tuning starts as soon as you release

the key.

Operating this unit

Section

Operating this unit

# You can also perform seek tuning by pressing

and holding o or p.

Note

Listening MW radio while an iPod is charged

from this unit may generate noise. In this case,

turn the iPod charge setting off and noise is dis-

appeared. (Refer to Switching the iPod charge set-

ting on page 52.)

Storing and recalling broadcast

frequencies

You can easily store up to six broadcast fre-

quencies for later recall.

! Up to 18 FM stations, six for each of the

three FM bands, and six MW/LW stations

can be stored in memory.

1 Touch LIST to display the preset list.

2 When you find a frequency that you

want to store in memory keep touching

one of preset tuning keys P1 to P6 until the

beep sounds.

The selected radio station frequency has been

stored in memory.

The next time you touch the same preset tun-

ing key the radio station frequency is recalled

from memory.

3 Touch ESC to return to the ordinary dis-

play.

Note

You can also use a and b to recall radio station

frequencies assigned to preset tuning keys P1 to

P6.

Introduction of advanced

operations

1 Touch A.MENU and then touch

FUNCTION MENU to display the function

names.

The function names are displayed and oper-

able ones are highlighted.

2 Touch ESC to return to the frequency

display.

# To return to the previous display, touch BACK.

Storing the strongest broadcast

frequencies

BSM (best stations memory) lets you automa-

tically store the six strongest broadcast fre-

quencies under preset tuning keys P1 to P6

and once stored there you can tune in to those

frequencies with the touch of a key.

! Storing broadcast frequencies with BSM

may replace broadcast frequencies you

have saved using P1 to P6.

% Touch BSM on the function menu to

turn BSM on.

BSM begins to flash. While BSM is flashing

the six strongest broadcast frequencies will be

stored under preset tuning keys P1 to P6 in

order of their signal strength. When finished,

BSM stops flashing.

# To cancel the storage process, touch BSM

again.

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals

for good reception.

Operating this unit

Section

% Touch LOCAL on the function menu to

set the sensitivity.

Touch LOCAL repeatedly until the desired level

of sensitivity appears in the display.

There are four levels of sensitivity for FM and

two levels for MW/LW:

FM: OFF—LEVEL1—LEVEL2—LEVEL3—

LEVEL4

MW/LW: OFF—LEVEL1—LEVEL2

The LEVEL4 setting allows reception of only

the strongest stations, while lower settings let

you receive progressively weaker stations.

Selecting alternative frequencies

When the tuner can’t get good reception, the

unit automatically search for a different sta-

tion in a same network.

% Touch AF on the function menu to turn

AF on.

# To turn AF off, touch AF again.

Notes

! Only RDS stations are tuned in during seek

tuning or BSM when AF is on.

! When you recall a preset station, the tuner

may update the preset station with a new fre-

quency from the station’s AF list. (This is only

available when using presets on the FM1 or

FM2 bands.) No preset number appears on

the display if the RDS data for the station re-

ceived differs from that for the originally

stored station.

! Sound may be temporarily interrupted by an-

other program during an AF frequency

search.

! AF can be turned on or off independently for

each FM band.

Using PI Seek

If the tuner can’t find a suitable station, or re-

ception status becomes bad, the unit will auto-

matically search for a different station with a

same programming. During the search,

PI SEEK is displayed and the output is muted.

Using Auto PI Seek for preset stations

When preset stations cannot be recalled, as

when travelling long distances, the unit can

be set to perform PI Seek during preset recall.

! The default setting for Auto PI Seek is off.

See Switching Auto PI Seek on page 46.

Limiting stations to regional

programming

When AF is used, the regional function limits

the selection of stations broadcasting regional

programs.

% Touch REGIONAL on the function menu

to tur n the regional function on.

# To turn the regional function off, touch

REGIONAL again.

Notes

! Regional programming and regional networks

are organized differently depending on the

country (i.e., they may change according to

the hour, state or broadcast area).

! The preset number may disappear from the

display if the tuner tunes in a regional station

which differs from the originally set station.

! The regional function can be turned on or off

independently for each FM band.

Operating this unit

Section

Operating this unit

Receiving traffic announcements

TA (traffic announcement standby) lets you re-

ceive traffic announcements automatically, no

matter what source you are listening to. TA

can be activated for both a TP station (a sta-

tion that broadcasts traffic information) or an

enhanced other network’s TP station (a station

carrying information which cross-references

TP stations).

1 Tune in a TP or enhanced other net-

work’s TP station.

TRAFFIC indicator will light.

2 Press TA/NEWS to tur n traffic an-

nouncement standby on.

dTRAFFIC appears in the display. The tuner

will stand by for traffic announcements.

# If you turned TA function on while tuned in to

neither a TP nor an enhanced other network’sTP

station, dimmed TRAFFIC indicator lights.

# To turn traffic announcements standby off,

press TA/NEWS again.

3 Use VOLUME/ATT to adjust the TA vo-

lume when a traffic announcement begins.

The newly set volume is stored in memory and

recalled for subsequent traffic announce-

ments.

4 Press TA/NEWS while a traffic an-

nouncement is being received to cancel the

announcement.

The tuner returns to the original source but re-

mains in the standby mode until TA/NEWS is

pressed again.

Notes

! The system switches back to the original

source following traffic announcement recep-

tion.

! Only TP and enhanced other network’s TP sta-

tions are tuned in during seek tuning or BSM

when TA is on.

Using PTY functions

You can tune in a station by using PTY (pro-

gram type) information.

Searching for an RDS station by PTY

information

You can search for general types of broadcast-

ing programs, such as those listed on the next

page.

1 Touch PTY on the function menu.

2 Touch c or d to select a program type.

There are four program types:

News&Inf—Popular—Classics—Others

3 Touch d to begin the search.

The unit searches for a station broadcasting

that program type. When a station is found its

program service name is displayed.

PTY (program type ID code) information is

listed on the next page.

# To cancel the search, touch c.

# The program of some stations may differ from

that indicated by the transmitted PTY.

# If no station is broadcasting the type of pro-

gram you searched for, NOT FOUND is displayed

for about two seconds and then the tuner returns

to the original station.

Using news program interruption

When a news program is broadcast from a

PTY code news station, the unit can switch

from any station to the news broadcast sta-

tion. When the news program ends, reception

of the previous program resumes.

% Press TA/NEWS and hold to turn on

news program interruption.

Press TA/NEWS until NEWS ON appears in

the display.

# To turn off news program interruption, press

TA/NEWS and hold again.

# A news program can be canceled by pressing

TA/NEWS.

Operating this unit

Section

Receiving PTY alarm broadcasts

When the emergency PTY code broadcasts,

the unit receives it automatically (ALARM ap-

pears). When the broadcasting ends, the sys-

tem returns to the previous source.

! An emergency announcement can be can-

celed by pressing TA/NEWS.

Using radio text

This tuner can display radio text data trans-

mitted by RDS stations, such as station infor-

mation, the name of the currently broadcast

song and the name of the artist.

! The tuner automatically memorizes the

three latest radio text broadcasts received,

replacing text from the least recent recep-

tion with new text when it is received.

Displaying radio text

You can display the currently received radio

text and the three most recent radio texts.

1 Touch TEXT to display radio text.

Radio text for the currently broadcasting sta-

tion is displayed.

# You can cancel radio text display by touching

ESC or pressing BAND/ESC.

# When no radio text is received, NO TEXT ap-

pears in the display.

2 Touch PREV or NEXT to recall the three

most recent radio texts.

Touching PREV or NEXT switches between the

current and the three radio text data displays.

# If there is no radio text data in memory the dis-

play will not change.

Storing and recalling radio text

You can store data from up to six radio text

transmissions for keys MEMO 1 to MEMO 6.

1 Display the radio text you want to

store in memory.

Refer to Displaying radio text on this page.

2 Touch any keys MEMO 1 to MEMO 6

and hold to store the selected radio text.

The memory number will display and the se-

lected radio text will be stored in memory.

The next time you press the same button in

the radio text display the stored text is recalled

from memory.

PTY list

General Specific Type of program

News&Inf News News

Affairs Current affairs

Info General information and

advice

Sport Sports

Weather Weather reports/meteoro-

logical information

Finance Stock market reports,

commerce, trading, etc.

Popular Pop Mus Popular music

Rock Mus Contemporary modern

music

Easy Mus Easy listening music

Oth Mus Non-categorized music

Jazz Jazz

Country Country music

Nat Mus National music

Oldies Oldies, golden oldies

Folk Mus Folk music

Classics L. Class Light classical music

Classic Classical music

Operating this unit

Section

Operating this unit

General Specific Type of program

Others Educate Educational programs

Drama Radio plays and serials

Culture National or regional cul-

ture

Science Nature, science and tech-

nology

Varied Light entertainment

Children Children’s

Social Social affairs

Religion Religious affairs or ser-

vices

Phone In Phone in

Touring Travel programs; not for

traffic announcements

Leisure Hobbies and recreational

activities

Document Documentaries

Built-in DVD player

Basic Operations

1 Source icon

2 Media indicator

Shows the type of disc currently playing.

3 Title/Folder number indicator

DVD: shows the title currently playing.

Compressed audio and DivX: shows the folder

currently playing.

4 Chapter/track/file number indicator

DVD: shows the chapter currently playing.

Video CD and CD: shows the track currently

playing.

Compressed audio and DivX: shows the file

currently playing.

5 Play time indicator

6 Variable message area

DVD video: shows the subtitle language,

audio language and viewing angle.

CD TEXT, compressed audio, DivX and DVD-

VR: shows the text information of currently

playing disc.

1 Insert a disc into the disc loading slot.

Playback will automatically start.

# Be sure to turn up the label side of a disc.

# After a disc has been inserted, use touch

panel keys to select the DVD player.

# When the automatic playback function is on,

this unit will cancel the DVD menu and automati-

cally start playback from the first chapter of the

first title. Refer to Automatic playback of DVDs on

page 30.

Operating this unit

Section

# With some DVD discs, a menu may be dis-

played. (Refer to Operating the DVD menu on the

next page.)

# With a Video CD featuring the PBC (playback

control) function, a menu is displayed. (Refer to

PBC playback on the next page.)

# To eject a disc, press EJECT.

2 Touch the screen to display the touch

panel keys.

3 When playing a compressed audio or

DivX, touch a or b to select a folder.

# To return to folder 01 (ROOT), press and hold

BAND/ESC. However, if folder 01 (ROOT) con-

tains no files, playback commences with folder

02.

4 To skip back or forward to another

chapter/track, briefly touch o or p.

# You can also skip back or forward to another

chapter/track by pressing o or p.

# During PBC playback, a menu may be dis-

played if you perform these operations.

5 To perform fast forward or reverse,

keep touching o or p.

When DVD, DivX disc or Video CD is playing, if

you keep touching o or p for five sec-

onds, the icon m or n is highlighted.

When this happens, fast reverse/fast forward

continues even if you release o or p.To

resume playback at a desired point, touch

de.

# When playing DVD video or Video CD, fast for-

ward/fast reverse may not be possible at certain

locations on some discs. If this happens, normal

playback automatically resumes.

Notes

! If you do not use the touch panel keys within

30 seconds, they will be hidden automatically

when displaying video image.

! Read the precautions with discs and player on

Handling guideline of discs and player on page

90.

! If an error message such as ERROR-02-XX is

displayed, refer to Error messages on page 87.

! If bookmark function is on, DVD playback re-

sumes from the selected point. For more de-

tails, refer to Resume playback (Bookmark) on

page 28.

! If a disc contains a mixture of various media

file types such as DivX and MP3, you can

switch between media file types to play. Refer

to Switching the media file type on the next

page.

! There is sometimes a delay between starting

up disc playback and the sound being issued.

When being read, FORMAT READ is dis-

played.

! When playing back files recorded as VBR

(variable bit rate) files, the play time will not be

correctly displayed if fast forward or reverse

operations are used.

! When playing back WMA files, album title list

does not appear.

! If the characters recorded on the disc are not

compatible with this unit, those characters

will not be displayed.

Basic playback controls

The table below shows the basic controls for

playing discs. The following chapters cover

other playback features in more details.

Key What it does

Starts playback, pauses a disc that’s playing or

restarts a paused disc.

g Stops playback.

Skips to the start of the current track, chapter

or file, then to previous tracks/chapters/files.

! Performs fast reverse by touching and

holding o.

Skips to the next track, chapter or file.

! Performs fast forward by touching and

holding p.

Operating this unit

Section

Operating this unit

Note

You may find with some DVD or Video CD discs

that some playback controls do not work in cer-

tain parts of the disc. This is not a malfunction.

Switching the media file type

When playing a disc containing a mixture of

various media file types such as DivX and

MP3, you can switch between media file types

to play.

! This unit allows playback of the following

media file type recorded on CD-R/RW/ROM

discs.

— Audio data (CD-DA)

— Compressed audio files

— DivX video files

! In case of DVD-R/RW/ROM, this unit does

not allow playback of audio data (CD-DA).

% Touch MEDIA to switch between media

file types.

Touch MEDIA repeatedly to switch between

the following media file types:

CD (audio data (CD-DA))—WMA/MP3/AAC

(compressed audio)—DivX (DivX video files)

Operating the DVD menu

Some DVDs allow you to select from the disc

contents using a menu.

! This function is available for DVD video.

! You can display the menu by touching

MENU or TOP MENU while a disc is play-

ing. Touching either of these keys again

lets you start playback from the location se-

lected from the menu. For details, refer to

the instructions provided with the disc.

Using DVD menu direct touch control

This function allows you to operate the DVD

menu by touching the menu item directly.

% Touch the desired menu item on the

DVD menu directly.

# Depending on the contents of DVD discs, this

function may not work properly. In this case,

using touch panel keys operate the DVD menu.

Using the touch panel keys

1 Touch to display touch panel keys

to operate the DVD menu.

# When the touch panel keys are not displayed,

you can display them by touching the screen.

# To switch to the DVD menu direct touch con-

trol, touch TOUCH.

2 Touch a, b, c or d to select the desired

menu item.

3 Touch ENTER.

Playback starts from the selected menu item.

# The way to display the menu differs depending

on the disc.

PBC playback

During playback of Video CDs featuring PBC

(Playback Control), PBC ON is displayed. You

can operate PBC menu with 10Key.

! This function is available for Video CD.

1 When PBC menu is displayed, touch

SEARCH and then touch 10Key.

# Depending on the discs, the menu may be

two or more pages long. In such case, touch o

or p to display the next or previous menu.

2 Touch 0 to 9 corresponding to a menu

number and then touch ENTER to start

playback.

Playback starts from the selected menu item.

3 Touch ESC to hide the touch panel keys.

Operating this unit

Section

Notes

! You can display the menu by touching

RETURN during PBC playback. For details,

refer to the instructions provided with the

disc.

! PBC playback of Video CD cannot be can-

celled.

! During playback of Video CDs featuring PBC

(Playback Control), PBC ON, search and time

search functions cannot be used nor can you

select the range for repeat play.

Playing DivX

VOD content

Some DivX VOD (video on demand) content

may only be playable a fixed number of times.

When you load a disc containing this type of

DivX VOD content, the remaining number of

plays is shown on-screen and you then have

the option of playing the disc (thereby using

up one of the remaining plays), or stopping. If

you load a disc that contains expired DivX

VOD content (for example, content that has

zero remaining plays), RENTAL EXPIRED is

displayed.

! If your DivX VOD content allows an unlim-

ited number of plays, then you may load

the disc into your player and play the con-

tent as often as you like, and no message

will be displayed.

Important

! In order to play DivX VOD content on this unit,

you first need to register the unit with your

DivX VOD content provider. About your regis-

tration code, refer to Displaying your DivX

VOD registration code on page 44.

! DivX VOD content is protected by a DRM (Di-

gital Rights Management) system. This re-

stricts playback of content to specific,

registered devices.

% If the message is displayed after load-

ing a disc containing DivX VOD content,

touch PLAY.

Playback of the DivX VOD content will start.

# To skip to the next file, touch NEXT PLAY.

# If you do not want to play the DivX VOD con-

tent, touch STOP.

Skipping back or forward to

another title

! This function is available for DVD.

% To skip back or forward to another title,

touch a or b.

Touching a skips to the start of the next title.

Touching b skips to the start of the previous

title.

Title numbers are displayed for eight seconds.

# To switch between groups of touch panel keys,

touch NEXT or PREV.

Selecting the play mode

You have two methods for playing DVD-VR

disc; ORIGINAL (original) and PLAYLIST (play-

list).

! Titles created with DVD recorders are

called original. Based on original, rear-

ranged titles are called playlist. Playlists

are created on DVD-R/RW discs.

! This function is available for DVD-VR.

% Touch MODE CHANGE to switch the

play mode.

If the play mode is changed, playback starts

from the beginning of the selected play mode.

CM skip/CM back

This function skips a reproduced image for a

specified time. If the currently playing disc

contains commercials, it is possible to skip

them.

! This function is available for DVD.

Operating this unit

Section

Operating this unit

% To skip progressively backward or for-

ward, touch

or .

Each time you touch

or it changes steps

in the following order:

CM back

5 sec.—15 sec.—30 sec.—1.0 min.—2.0

min.—3.0 min.

CM skip

30 sec.—1.0 min.—1.5 min.—2.0 min.—3.0

min.—5.0 min.—10.0 min.

Resume playback (Bookmark)

The Bookmark function lets you resume play-

back from a selected scene the next time the

disc is loaded.

! This function is available for DVD video.

% During playback, touch BOOKMARK at

the point you want to resume playback

next time.

The selected scene will be bookmarked so that

playback resumes from that point next time.

You can bookmark up to five discs. After that,

the oldest bookmark is replaced by the new

one.

# To switch between groups of touch panel keys,

touch NEXT or PREV.

# To clear the bookmark on a disc, keep touch-

ing BOOKMARK during playback.

# You can also bookmark a disc by pressing and

holding EJECT at the point you want to bookmark.

Next time you load the disc, playback will resume

from the bookmarked point. Note that you can

only bookmark one disc using this method. To

clear the bookmark on a disc, press EJECT.

Searching for the part you

want to play

You can use the search function to find the

part you want to play.

! This function is available for DVD, DivX

disc and Video CD.

! Chapter search, track search and time

search are not possible when disc playback

has been stopped.

! During playback of Video CDs featuring

PBC (playback control), this function can-

not be operated.

1 Touch SEARCH.

# To switch between groups of touch panel keys,

touch NEXT or PREV.

2 Touch the desired search option (e.g.,

CHAP.).

# You cannot operate this step during DivX disc

playback.

3 Touch 0 to 9 to input the desired num-

ber.

# To cancel the inputted numbers, touch C.

# In the time search function, to select 1 hour

11 minutes, convert the time into 71 minutes 00

seconds and touch 7, 1, 0 and 0 in that order.

4 Touch ENTER.

This starts playback from the selected part.

Note

With DVD discs featuring a menu, you can also

touch MENU or TOP MENU and then make se-

lections from the displayed menu.

Changing audio language

during playback (Multi-audio)

DVDs can provide audio playback with differ-

ent languages and different systems (Dolby Di-

gital, DTS etc.). With DVDs featuring multi-

audio recordings, you can switch between lan-

guages/audio systems during playback.

! This function is available for DVD and DivX

disc.

% Touch AUDIO during playback.

Each time you touch AUDIO it switches be-

tween audio systems.

# To switch between groups of touch panel keys,

touch NEXT or PREV.

Operating this unit

Section

Notes

! With some DVDs, switching between lan-

guages/audio systems may only be possible

using a menu display.

! You can also switch between languages/audio

systems using DVD SETUP. For details, refer

to Setting the audio language on page 41.

! Only digital output of DTS audio is possible. If

this unit’s optical digital outputs are not con-

nected, DTS audio will not be output, so select

an audio setting other than DTS.

! Display indications such as Dolby D and

5.1ch indicate the audio system recorded on

the DVD. Depending on the setting, playback

may not be with the same audio system as

that indicated.

! Touching AUDIO during fast forward/fast re-

verse, pause or slow motion playback returns

you to normal playback.

Changing the subtitle language

during playback (Multi-subtitle)

With DVDs featuring multi-subtitle recordings,

you can switch between subtitle languages

during playback.

! This function is available for DVD and DivX

disc.

% Touch SUBTITLE during playback.

Each time you touch SUBTITLE it switches be-

tween subtitle languages.

# To switch between groups of touch panel keys,

touch NEXT or PREV.

Notes

! With some DVDs, switching between subtitle

languages may only be possible using a menu

display.

! You can also switch between subtitle lan-

guages using DVD SETUP. For details, refer to

Setting the subtitle language on page 40.

! Touching SUBTITLE during fast forward/fast

reverse, pause or slow motion playback re-

turns you to normal playback.

Changing the viewing angle

during playback (Multi-angle)

With DVDs featuring multi-angle (scenes shot

from multiple angles) recordings, you can

switch among viewing angles during play-

back.

! This function is available for DVD video.

! During playback of a scene shot from mul-

tiple angles, the angle icon

is dis-

played. Turn angle icon display on or off

using DVD SETUP. For details, refer to Set-

ting the angle icon display on page 42.

% Touch ANGLE during playback of a

scene shot from multiple angles.

Each time you touch ANGLE it switches be-

tween angles.

# To switch between groups of touch panel keys,

touch NEXT or PREV.

Note

Touching ANGLE during fast forward/fast reverse,

pause or slow motion playback returns you to

normal playback.

Frame-by-frame playback

This lets you move ahead one frame at a time

during playback.

! This function is available for DVD and

Video CD.

% Touch r during playback.

Each time you touch r, you move ahead one

frame.

# To return to normal playback, touch de.

# To switch between groups of touch panel keys,

touch NEXT or PREV.

# With some discs, images may be unclear dur-

ing frame-by-frame playback.

Slow motion playback

This lets you slow down playback speed.

Operating this unit

Section

Operating this unit

! This function is available for DVD and

Video CD.

% Keep touching r until

is displayed

during playback.

The icon

is displayed, forward slow motion

playback begins.

# Touching q or r during slow motion play-

back, you can change the playback speed in four

steps as follows:

1/16—1/8—1/4—1/2

! During DVD playback, only the remote con-

trol can perform this operation.

# To switch between groups of touch panel keys,

touch NEXT or PREV.

# To return to normal playback, touch de.

Notes

! There is no sound during slow motion play-

back.

! With some discs, images may be unclear dur-

ing slow motion playback.

! Reverse slow motion playback is not possible.

Return to the specified scene

You can return to the specified scene where

the DVD you are currently playing has been

preprogrammed to return.

! This function is available for DVD video.

% Touch RETURN to return to the speci-

fied scene.

# To switch between groups of touch panel keys,

touch NEXT or PREV.

# If a specified scene has not been prepro-

grammed in DVD disc, this function is not possi-

ble.

Automatic playback of DVDs

When a DVD disc with DVD menu is inserted,

this unit will cancel the DVD menu automati-

cally and start playback from the first chapter

of the first title.

! This function is available for DVD video.

! Some DVDs may not operate properly. If

this function is not fully operated, turn this

function off and start playback.

% Touch AUTO PLAY to turn automatic

playback on.

# To turn automatic playback off, touch

AUTO PLAY again.

# To switch between groups of touch panel keys,

touch NEXT or PREV.

# When the automatic playback is on, you can-

not operate repeating play of DVD disc (refer to

Repeating play on page 32).

Operating this unit

Section

Text information

Text information recorded on a disc can be dis-

played. Text information is displayed on vari-

able message area.

! This function is available for CD TEXT, com-

pressed audio disc, DivX disc and DVD-VR.

Displaying text information

% Touch INFO.

Touch INFO repeatedly to switch between the

following settings:

For CD TEXT discs

: disc title— : disc artist name— : track

title—

: track artist name

For compressed audio discs

: folder name— : file name— : album

title—

: track title— : artist name

For DivX discs

: folder name— : file name

For DVD-VR discs

/ : playback mode— : title

name

Notes

! Some discs have certain information encoded

on the disc during manufacture. These discs

may contain such information as the CD title,

track title, artist’s name and playback time

and are called CD TEXT discs.

! If specific information has not been recorded

on a CD TEXT disc, No XXXX will be displayed

(e.g., No Name).

! If specific information has not been recorded

on a compressed audio disc, no xxxx will be

displayed (e.g., no artist).

! When playing back WMA files, album title is

not displayed.

Selecting tracks from the track list

Track list lets you see the list of tracks on a

disc and select one of them to play back.

When playing a CD TEXT disc, track titles are

displayed.

! This function is available for CD.

1 Touch LIST.

2 Touch

or to switch between the

lists of tracks.

3 Touch your favorite track.

That selection will begin to play.

4 Touch ESC to return to the ordinary dis-

play.

Selecting files from the file

name list

File name list lets you see the list of file names

(or folder names) and select one of them to

playback.

! This function is available for compressed

audio disc and DivX disc.

1 Touch LIST.

2 Touch

or to switch between the

lists of titles.

3 Touch your favorite file name (or folder

name).

That selection will begin to play.

# When you have selected a folder, a list of the

names of the files (or the folders) in it can be

viewed. Repeat steps 2 and 3 to select the desired

file name.

# To return to the previous list (the folder one

level higher), touch

4 Touch ESC to return to the ordinary dis-

play.

Operating this unit

Section

Operating this unit

Selecting titles from the title list

Title list lets you see the list of titles on a disc

and select one of them to play back.

! This function is available for DVD-VR.

1 Touch LIST.

2 Touch

or to switch between the

lists of titles.

3 Touch your favorite title.

That selection will begin to play.

4 Touch ESC to return to the ordinary dis-

play.

Introduction of advanced

operations

1 Touch A.MENU and then touch

FUNCTION MENU to display the function

names.

The function names are displayed and oper-

able ones are highlighted.

2 Touch ESC to return to the playback dis-

play.

# To return to the previous display, touch BACK.

Repeating play

Repeat play plays the same play range repeat-

edly. Play range varies depending on the

media.

For DVD, play range can be selected from

DISC (disc repeat), TITLE (title repeat) and

CHAPTER (chapter repeat).

For Video CD and CD, play range can be se-

lected from DISC (disc repeat) and TRACK

(track repeat).

For compressed audio and DivX, play range

can be selected from DISC (disc repeat),

FOLDER (folder repeat) and FILE (file repeat).

! During playback of Video CDs featuring

PBC (playback control), this function can-

not be operated.

% Touch REPEAT on the function menu to

select the repeat range.

! TITLE – Repeat just the current title

! CHAPTER – Repeat just the current chapter

! TRACK – Repeat just the current track

! FILE – Repeat just the current file

! FOLDER – Repeat the current folder

! DISC – Play through the current disc

Notes

! If you perform chapter search or fast forward/

reverse, the repeat play range changes to

DISC.

! If you select another folder during repeat play,

the repeat play range changes to DISC.

! When playing back compressed audio or

DivX, if you perform track search or fast for-

ward/reverse during FILE, the repeat play

range changes to FOLDER.

! When playing back Video CD or CD, if you per-

form track search or fast forward/reverse dur-

ing TRACK, the repeat play range changes to

DISC.

! When FOLDER is selected, it is not possible to

play back a subfolder of that folder.

! When playing discs with compressed audio

and audio data (CD-DA), repeat play performs

within the currently playing data type even if

DISC is selected.

Playing tracks in random order

Random play plays tracks in a random order

within the selected repeat range.

! This function is available for CD and com-

pressed audio disc.

1 Select the repeat range.

Refer to Repeating play on this page.

Operating this unit

Section

2 Touch RANDOM on the function menu

to tur n random play on.

Tracks will play in a random order within the

previously selected repeat range.

# To turn random play off, touch RANDOM

again.

Scanning tracks or folders

Scan play lets you hear the first 10 seconds of

each track on the CD.

When playing the compressed audio disc, the

first 10 seconds of each track of the current

folder (or the first track of each folder) is

played.

! This function is available for CD and com-

pressed audio disc.

1 Select the repeat range.

Refer to Repeating play on the previous page.

2 Touch SCAN on the function menu to

turn scan play on.

The first 10 seconds of each track is played.

3 When you find the desired track (or

folder) touch SCAN again.

Note

After track or folder scanning is finished, normal

playback of the tracks will begin again.

Selecting audio output

When playing DVD video discs recorded with

LPCM audio, you can switch the audio output.

When playing Video CD discs, you can switch

between stereo and monaural audio output.

! This function is available for DVD and

Video CD.

! This function is not possible when disc

playback has been stopped.

! If you select Linear PCM, when playing a

disc recorded on a dual mono mode, you

can operate this function. (Refer to Setting

for digital output on page 44.)

% Touch L/R SELECT on the function menu

to select the audio output.

Touch L/R SELECT repeatedly until the desired

audio output appears in the display.

! L+R – left and right

! LEFT – left

! RIGHT – right

! MIX – mixing left and right

Note

Depending on the disc and the playback location

on the disc, the function may not be selectable,

indicating that operating this function is not pos-

sible.

Using compression

Using the COMP (compression) function lets

you adjust the sound playback quality of this

unit.

% Touch COMPRESSION on the function

menu to select your favorite setting.

OFF—COMP1—COMP2

Operating this unit

Section

Operating this unit

Playing songs on iPod

Basic Operations

You can use this unit to control an iPod by

using a cable (e.g., CD-I200), which is sold se-

parately.

1 Source icon

2 Repeat indicator

Shows when repeat range is set to ONE or

ALL.

3 Song number indicator

4 Song title indicator

5 Shuffle indicator

Shows when random play is set to SONGS or

ALBUMS.

6 Play time indicator

7 Song information

Shows detailed information of currently play-

ing song.

8 Battery charging indicator

Shows when the battery charge setting is on.

1 Connect the iPod to this unit.

Playback will automatically start.

While the iPod is connected to this unit,

PIONEER (or

(check mark)) is displayed on

the iPod.

# Before connecting the dock connector of this

unit to the iPod, disconnect the headphones from

the iPod.

# After the iPod has been connected to this

unit, use touch panel keys to select the iPod.

# When removing the iPod from this unit, this

unit is turned off.

2 To skip back or forward to another

song, touch o or p.

# You can also skip back or forward to another

song by pressing o or p.

3 To perform fast forward or reverse,

keep touching o or p.

# You can also perform fast reverse/fast forward

by pressing and holding o or p.

4 When playing Audiobook or Podcast

(with chapter) on iPod, touch CHAPa or

CHAPb to select a chapter.

# To switch between groups of touch panel keys,

touch NEXT or PREV.

Notes

! Read the precautions with iPod on page 93.

! If an error message such as ERROR-11 is dis-

played, refer to Error messages on page 87.

! Connect directly the dock connector of this

unit to the iPod so that this unit works prop-

erly.

! When the ignition switch is set to ACC or ON,

the iPod’s battery is charged while the iPod is

connected to this unit.

! While the iPod is connected to this unit, the

iPod itself cannot be turned on or off.

! The iPod connected to this unit is turned off

about two minutes after the ignition switch is

set to OFF.

Browsing for a song

The operation of this unit to control an iPod is

designed to be as close to the operation of the

iPod as possible for easy operation and song

search.

! If the characters recorded on the iPod are

not compatible with this unit, those charac-

ters will not be displayed.

Operating this unit

Section

1 Touch MENU to display iPod menus.

2 Touch one of the categories in which

you want to search for a song.

! PLAYLISTS (playlists)

! ARTISTS (artists)

! ALBUMS (albums)

! SONGS (songs)

! PODCASTS (podcasts)

! GENRES (genres)

! AUDIOBOOKS (audiobooks)

# To switch between groups of categories, touch

PREV or NEXT.

3 Touch a list title that you want to play.

Repeat this operation until you find the de-

sired song.

# You can start playback throughout the se-

lected list by touching and holding desired list

title.

# You can start a playback of all the songs in the

selected list (GENRES, ARTISTS or ALBUMS). To

do this, touch ALL.

# To switch between the lists of titles, touch

# To return to the previous menu, touch MENU.

4 Touch ESC to return to the ordinary dis-

play.

Displaying text information on

iPod

% Touch INFO to select the desired text in-

formation.

: song title— : artist name— : album title

# If the characters recorded on the iPod are not

compatible with this unit, those characters will

not be displayed.

Repeating play

For playback of the songs on the iPod, there

are two repeat play ranges: ONE (repeat one

song) and ALL (repeat all songs in the list).

! While repeat play range is set to ONE, you

cannot select the other songs.

% Touch

to select the repeat range.

! ONE – Repeat just the current song

! ALL – Repeat all songs in the selected list

# To switch between groups of touch panel keys,

touch NEXT or PREV.

Playing songs in a random

order (shuffle)

For playback of the songs on the iPod, there

are two random play methods: SONGS (play

back songs in a random order) and ALBUMS

(play back albums in a random order).

% Touch

to select the random play

method.

! SONGS – Play back songs in a random

order within the selected list

! ALBUMS – Select an album randomly, and

then play back all the songs in it in order

# To cancel the random play, touch

repeat-

edly until the shuffle icon is turned off.

Playing all songs in a random

order (shuffle all)

This method plays all songs on the iPod ran-

domly.

% Touch

to tur n shuffle all on.

All songs on the iPod will play randomly.

Operating this unit

Section

Operating this unit

Pausing a song

% Touch de during playback.

# To resume playback at the same point that you

turned pause on, touch de again.

Changing audiobook speed

While listening to an audiobook on iPod, play-

back speed can be changed.

% Touch A.Book to select your favorite

setting.

! FASTER – Playback faster than normal

speed

! NORMAL – Playback in normal speed

! SLOWER – Playback slower than normal

speed

# To switch between groups of touch panel keys,

touch NEXT or PREV.

Playing video

This unit can play video if an iPod with video

capabilities is connected. However, only the

following touch panel keys can be used for

iPod operation: de, o and p. Use the

iPod to operate other functions.

! Change the video setting on the iPod so

that the iPod can output the video to an ex-

ternal device, before you display the video

screen.

! For details, refer to the iPod’s manuals.

1 Touch Video.

# To return to the music operation screen, touch

Music.

2 Play video on the iPod by operating the

iPod.

Audio Adjustments

Introduction of audio adjustments

1 Audio display

Shows the audio adjustment status.

Important

If the multi-channel processor (DEQ-P6600) is

connected to this unit, the audio function will be

changed to the multi-channel processor’s audio

menu. For details, refer to Introduction of DSP ad-

justments on page 73.

1 Touch A.MENU and then touch

AUDIO MENU to display the audio function

names.

The audio function names are displayed and

operable ones are highlighted.

# To go to the next group of function names,

touch NEXT.

# To return to the previous group of function

names, touch PREV.

# When selecting the FM as the source, you

cannot switch to SLA.

2 Touch ESC to return to the ordinary dis-

play.

# To return to the previous display, touch BACK.

Using balance adjustment

You can change the fader/balance setting so

that it can provide you an ideal listening envir-

onment in all occupied seats.

Operating this unit

Section

1 Touch FADER/BALANCE on the audio

function menu.

# When the rear output setting is S.W,

BALANCE will be displayed instead of

FADER/BALANCE. Refer to Setting the rear output

and subwoofer controller on page 45.

2 Touch a or b to adjust front/rear

speaker balance.

Each time you touch a or b it moves the

front/rear speaker balance towards the front or

the rear.

FRONT:15 to REAR:15 is displayed as the

front/rear speaker balance moves from front to

rear.

# FR: 0 is the proper setting when only two

speakers are used.

# When the rear output setting is S.W, you can-

not adjust front/rear speaker balance. Refer to

Setting the rear output and subwoofer controller

on page 45.

3 Touch c or d to adjust left/right speak-

er balance.

Each time you touch c or d it moves the left/

right speaker balance towards the left or the

right.

LEFT:15 to RIGHT:15 is displayed as the left/

right speaker balance moves from left to right.

Using the equalizer

The equalizer lets you adjust the equalization

to match car interior acoustic characteristics

as desired.

Recalling equalizer curves

There are seven stored equalizer curves which

you can easily recall at any time. Here is a list

of the equalizer curves:

Display Equalizer curve

POWERFUL Powerful

NATURAL Natural

VOCAL Vocal

CUSTOM1 Custom 1

CUSTOM2 Custom 2

FLAT Flat

SUPER BASS Super bass

! CUSTOM1 and CUSTOM2 are adjusted

equalizer curves that you create. Adjust-

ments can be made with a 7-band graphic

equalizer.

! When FLAT is selected no supplement or

correction is made to the sound. This is

useful to check the effect of the equalizer

curves by switching alternatively between

FLAT and a set equalizer curve.

% On the normal display, touch EQ to se-

lect the equalizer.

Touch EQ repeatedly to switch between the fol-

lowing equalizers:

POWERFUL—NATURAL—VOCAL—

CUSTOM1—CUSTOM2—FLAT—

SUPER BASS

Adjusting equalizer curves

The factory supplied equalizer curves, with the

exception of FLAT, can be adjusted to a fine

degree (nuance control).

1 Touch GRAPHIC EQ on the audio func-

tion menu.

2 Touch c or d to select an equalizer

curve.

POWERFUL—NATURAL—VOCAL—

CUSTOM1—CUSTOM2—FLAT—

SUPER BASS

Operating this unit

Section

Operating this unit

3 Touch c or d to adjust the equalizer

curve.

+6 to –4 (or –6) is displayed as the equalizer

curve is increased or decreased.

# The actual range of the adjustments are differ-

ent depending on which equalizer curve is se-

lected.

# The equalizer curve with all frequencies set to

0 cannot be adjusted.

Adjusting 7-band graphic equalizer

For CUSTOM1 and CUSTOM2 equalizer

curves, you can adjust the level of each band.

! A separate CUSTOM1 curve can be cre-

ated for each source. If you make adjust-

ments when a curve other than CUSTOM2

is selected, the equalizer curve settings will

be memorized in CUSTOM1.

! A CUSTOM2 curve can be created com-

mon to all sources. If you make adjust-

ments when the CUSTOM2 curve is

selected, the CUSTOM2 curve will be up-

dated.

1 Touch GRAPHIC EQ on the audio func-

tion menu.

2 Touch c or d to select an equalizer

curve.

POWERFUL—NATURAL—VOCAL—

CUSTOM1—CUSTOM2—FLAT—

SUPER BASS

3 Touch c or d to select the equalizer

band to adjust.

50Hz—125Hz—315Hz—800Hz—2kHz—

5kHz—12.5kHz

4 Touch a or b to adjust the level of the

equalizer band.

+12dB to -12dB is displayed as the level is in-

creased or decreased.

# You can then select another band and adjust

the level.

Adjusting loudness

Loudness compensates for deficiencies in the

low- and high-sound ranges at low volume.

1 Touch LOUDNESS on the audio function

menu.

2 Touch d to turn loudness on.

# To turn loudness off, touch c.

3 Touch c or d to select a desired level.

LOW (low)—MID (mid)—HIGH (high)

Using subwoofer output

This unit is equipped with a subwoofer output

which can be turned on or off.

! When the subwoofer output is on, you can

adjust the cut-off frequency and the output

level of the subwoofer.

1 Touch SUB WOOFER on the audio func-

tion menu.

2 Touch d next to SUB WOOFER to turn

subwoofer output on.

# To turn subwoofer output off, touch c.

3 Touch c or d next to PHASE to select

the phase of subwoofer output.

Touch d to select normal phase and

NORMAL appears in the display. Touch c to

select reverse phase and REVERSE appears in

the display.

4 Touch c or d next to FREQUENCY to se-

lect cut-off frequency.

Each time you touch c or d selects cut-off fre-

quencies in the following order:

50Hz—63Hz—80Hz—100Hz—125Hz

Only frequencies lower than those in the se-

lected range are outputted from the subwoo-

fer.

Operating this unit

Section

5 Touch c or d next to LEVEL to adjust

the output level of the subwoofer.

+6 to –24 is displayed as the level is increased

or decreased.

Boosting the bass

Bass boost function boosts the bass level of

sound lower than 100 Hz. The more the bass

level is increased, the more the bass sound is

emphasized and the entire sound becomes

power ful. When using this function with the

subwoofer, the sound under the cut-off fre-

quency is boosted.

1 Touch BASS BOOSTER on the audio

function menu.

2 Touch c or d to select a desired level.

0 to +6 is displayed as the level is increased or

decreased.

Using the high pass filter

When you do not want low sounds from the

subwoofer output frequency range to play

from the front or rear speakers, turn on the

HPF (high pass filter). Only frequencies higher

than those in the selected range are outputted

from the front or rear speakers.

1 Touch HPF on the audio function menu.

2 Touch d next to HPF to turn high pass

filter on.

# To turn high pass filter off, touch c.

3 Touch c or d next to FREQUENCY to se-

lect cut-off frequency.

Each time you touch c or d selects cut-off fre-

quencies in the following order:

50Hz—63Hz—80Hz—100Hz—125Hz

Only frequencies higher than those in the se-

lected range are outputted from the front or

rear speakers.

Adjusting source levels

SLA (source level adjustment) lets you adjust

the volume level of each source to prevent ra-

dical changes in volume when switching be-

tween sources.

! Settings are based on the FM volume level,

which remains unchanged.

1 Compare the FM volume level with the

level of the source you wish to adjust.

2 Touch NEXT on the audio function

menu.

3 Touch SLA.

4 Touch c or d to adjust the source vo-

lume.

Each time you touch c or d it increases or de-

creases the source volume.

+4 to –4 is displayed as the source volume is

increased or decreased.

Notes

! The MW/LW volume level can also be adjusted

with source level adjustments.

! Video CD, CD, compressed audio and DivX

are set to the same source level adjustment

volume automatically.

! External unit 1 and external unit 2 are set to

the same source level adjustment volume

automatically.

Staging for car environment

You can create in car a sound environment

that can be best matched with the type of your

listening music (or movie).

Operating this unit

Section

Operating this unit

1 Touch NEXT on the audio function

menu.

2 Touch STAGING.

3 Touch c or d next to STAGING to select

the desired staging field.

OFF (off)—STUDIO (studio)—THEATER (thea-

ter)—STAGE (stage)—LIVING (living)

4 Touch c or d next to POSITION to select

a listening position.

LEFT (left)—CENTER (center)—RIGHT

(right)

Setting up the DVD player

Introduction of DVD setup

adjustments

You can use this menu to change audio, subti-

tle, parental lock and other DVD settings.

1 DVD setup menu display

Shows the DVD setup menu names.

1 Touch g.

SETUP will be displayed instead of MENU.

2 Touch SETUP.

The DVD setup function names are displayed.

# To go to the next group of function names,

touch NEXT.

# To return to the previous group of function

names, touch PREV.

3 Touch ESC to return to the playback dis-

play.

# To return to the previous display, touch BACK.

Setting the subtitle language

You can set a desired subtitle language. If the

selected subtitle language is recorded on the

DVD, subtitles are displayed in that language.

1 Touch SUB TITLE LANGUAGE on the

DVD setup menu.

A subtitle language menu is displayed.

Operating this unit

Section

2 Touch the desired language.

A subtitle language is set.

# To switch to the second language select

menu, touch NEXT.

# To return to the first language select menu,

touch PREV.

# If you have selected OTHERS, refer to When

you select OTHERS on this page.

Notes

! If the selected language is not recorded on

the disc, the language specified on the disc is

displayed.

! You can also switch the subtitle language by

touching SUBTITLE during playback. (Refer to

Changing the subtitle language during play-

back (Multi-subtitle) on page 29.)

! Even if you use SUBTITLE during playback to

switch the subtitle language, this does not af-

fect the settings here.

When you select OTHERS

When you select OTHERS, a language code

input display is shown. Refer to Language code

chart for DVD on page 95 to input the four-digit

code of the desired language.

1 Touch 0 to 9 to input the language

code.

# To cancel the inputted numbers, touch C.

2 Touch ENTER.

Setting the audio language

You can set the preferred audio language.

1 Touch AUDIO LANGUAGE on the DVD

setup menu.

An audio language menu is displayed.

2 Touch the desired language.

The audio language is set.

# To switch to the second language select

menu, touch NEXT.

# To return to the first language select menu,

touch PREV.

# If you have selected OTHERS, refer to When

you select OTHERS on this page.

Notes

! If the selected language is not recorded on

the disc, the language specified on the disc is

outputted.

! You can also switch the audio language by

touching AUDIO during playback. (Refer to

Changing audio language during playback

(Multi-audio) on page 28.)

! Even if you use AUDIO during playback to

switch the audio language, this does not af-

fect the settings here.

Setting the menu language

You can set the preferred language for dis-

plays of menus recorded on a disc.

1 Touch MENU LANGUAGE on the DVD

setup menu.

A menu language menu is displayed.

2 Touch the desired language.

The menu language is set.

# To switch to the second language select

menu, touch NEXT.

# To return to the first language select menu,

touch PREV.

# If you have selected OTHERS, refer to When

you select OTHERS on this page.

Note

If the selected language is not recorded on the

disc, the language specified on the disc is dis-

played.

Operating this unit

Section

Operating this unit

Switching the assist subtitle on

or off

If assist subtitles are recorded on a DVD disc,

you can display them by turning the assist

subtitle function on.

You can turn assist subtitles on or off as de-

sired.

% Touch ASSIST SUB TITLE on the DVD

setup menu to turn assist subtitles on.

# To turn the assist subtitle off, touch

ASSIST SUB TITLE again.

Setting the angle icon display

You can set it up so that the angle icon ap-

pears on scenes where the angle can be

switched.

% Touch MULTI ANGLE on the DVD setup

menu to turn angle icon display on.

# To turn the angle icon display off, touch

MULTI ANGLE again.

Setting the aspect ratio

There are two kinds of display. A wide screen

display has a width-to-height ratio (TV aspect)

of 16:9, while a regular display has a TV aspect

of 4:3. Be sure to select the correct TV aspect

for the display connected to REAR MONITOR

OUTPUT.

! When using a regular display, select either

LETTER BOX or PAN SCAN. Selecting

16 : 9 may result in an unnatural picture.

! If you select the TV aspect, the unit’s dis-

play changes to the same setting.

% Touch TV ASPECT on the DVD setup

menu to select the TV aspect.

Touch TV ASPECT repeatedly until the desired

TV aspect appears in the display.

! 16 : 9 – Wide screen picture (16:9) is dis-

played as it is (initial setting)

! LETTER BOX – The picture is the shape of a

letterbox with black bands at the top and

bottom of the screen

! PAN SCAN – The picture is cut short at the

right and left of the screen

Notes

! When playing discs that do not specify

PAN SCAN, playback is with LETTER BOX

even if you select PAN SCAN setting. Confirm

whether the disc package bears the

16 : 9 LB

mark. (See page 12.)

! Some discs do not enable changing of the TV

aspect. For details, refer to the disc’s instruc-

tions.

Setting the parental lock

Some DVD video discs let you use parental

lock to restrict children from viewing violent

and adult-oriented scenes. You can set the par-

ental lock to your desired level.

! When you set a parental lock level and then

play a disc featuring parental lock, code

number input indications may be dis-

played. In this case, playback will begin

when the correct code number is input.

Setting the code number and level

You need to have registered a code number for

playing back discs with parantal lock.

1 Touch NEXT on the DVD setup menu.

2 Touch PARENTAL.

3 Touch 0 to 9 to input a four digit code

number.

# To cancel the inputted numbers, touch C.

Operating this unit

Section

4 Touch ENTER.

The code number is set, and you can now set

the level.

5 Touch any of 1 to 8 to select the desired

level.

The parental lock level is set.

! LEVEL 8 – Playback of the entire disc is pos-

sible (initial setting)

! LEVEL 7 to LEVEL 2 – Playback of discs for

children and non-adult-oriented discs is

possible

! LEVEL 1 – Playback of discs for children

only is possible

Notes

! We recommend to keep a record of your code

number in case you forget it.

! The parental lock level is recorded on the disc.

Look for the level indication written at the disc

package, included literature or on the disc it-

self. Parental lock of this unit is not possible if

a parental lock level is not recorded in the

disc.

! With some discs, the parental lock may be ac-

tive only on the scenes with certain levels. The

playback of those scenes will be skipped. For

details, refer to the instruction manual that

came with the discs.

Changing the level

You can change the set parental lock level.

1 Touch NEXT on the DVD setup menu.

2 Touch PARENTAL.

3 Touch 0 to 9 to input the registered

code number.

4 Touch ENTER.

This enters the code number, and you can now

change the level.

# If you input an incorrect code number, the

icon

is displayed. Touch C and input the cor-

rect code number.

# If you forget your code number, refer to If you

forget your code number on this page.

5 Touch any of 1 to 8 to select the desired

level.

The new parental lock level is set.

If you forget your code number

Refer to Changing the level on this page, and

touch C 10 times. The registered code number

is canceled, letting you register a new one.

Setting the DivX subtitle file

You can select whether to display DivX exter-

nal subtitles or not.

! The DivX subtitles will be displayed even

when CUSTOM is selected if no DivX exter-

nal subtitle files exist.

1 Touch NEXT on the DVD setup menu.

2 Touch DivX SUB TITLE to select the de-

sired subtitle setting.

! ORIGINAL – Display the DivX subtitles

! CUSTOM – Display the DivX external subti-

tles

Notes

! Up to 42 characters can be displayed on one

line. If more than 42 characters are set, the

line breaks and the characters are displayed

on the next line.

! Up to 126 characters can be displayed on one

screen. If more then 126 characters are set,

the excess characters will not be displayed.

Operating this unit

Section

Operating this unit

Displaying your DivX

VOD

registration code

In order to play DivX VOD (video on demand)

content on this unit, you first need to register

the unit with your DivX VOD content provider.

You do this by generating a DivX VOD registra-

tion code, which you submit to your provider.

1 Touch NEXT on the DVD setup menu.

2 Touch DivX VOD.

Your 8-digit registration code is displayed.

! Make a note of the code as you will need it

when you register with a DivX VOD provider.

Setting for digital output

Audio which is outputted from digital output

of this unit can be selected. Normally, set to

STREAM. If this unit’s digital output is not

used, there is no need to change settings.

! Selecting Linear PCM enables you to

switch the output channel if playing the fol-

lowing type of discs. (Refer to Selecting

audio output on page 33.)

— Dual mono mode DVD video discs

— Bilingual DVD-VR discs

1 Touch NEXT on the DVD setup menu.

2 Touch DIGITAL OUTPUT to select the de-

sired digital output setting.

! STREAM – The Dolby Digital/DTS signal is

output as it is (initial setting)

! Linear PCM – The Dolby Digital/DTS signal

is converted to and output as a linear PCM

signal

Initial Settings

Adjusting initial settings

Using the initial settings, you can customize

various system settings to achieve optimal per-

formance from this unit.

1 Function display

Shows the function names.

1 Touch the source icon and then touch

OFF to turn this unit off.

2 Touch the screen to display the touch

panel keys.

3 Touch A.MENU and then touch

INITIAL MENU to display the function

names.

The function names are displayed and oper-

able ones are highlighted.

# To go to the next group of function names,

touch NEXT.

# To return to the previous group of function

names, touch PREV.

4 Touch ESC to return to the ordinary dis-

play.

# To return to the previous display, touch BACK.

Operating this unit

Section

Switching the auxiliary setting

Auxiliary equipments connected to this unit

can be activated individually. Set each AUX

source to ON when using. About connecting

or using auxiliary equipments, refer to Using

the AUX source on page 53.

Switching the auxiliary 1 setting

% Touch AUX1 on the initial menu to se-

lect desired setting.

! VIDEO – an iPod with video capabilities

connected with 4-pole mini plug cable (e.g.,

CD-V150M)

! AUDIO – auxiliary equipment connected

with stereo mini plug cable

! OFF – No auxiliary equipment is connected

Switching the auxiliary 2 setting

% Touch AUX2 on the initial menu to turn

auxiliary 2 setting on.

# To turn auxiliary 2 setting off, touch AUX2

again.

Setting the rear output and

subwoofer controller

This unit’s rear output (rear speaker leads out-

put and RCA rear output) can be used for full-

range speaker (FULL) or subwoofer (S.W) con-

nection. If you switch the rear output setting

to S.W, you can connect a rear speaker lead

directly to a subwoofer without using an auxili-

ary amp.

! When the multi-channel processor (e.g.,

DEQ-P6600) is connected to this unit, you

cannot operate this function.

1 Touch REAR SP on the initial menu.

2 Touch c or d to switch the rear output

setting.

Touch c to select full-range speaker and FULL

appears in the display. Touch d to select sub-

woofer and S.W appears in the display.

# When no subwoofer is connected to the rear

output, select FULL.

# When a subwoofer is connected to the rear

output, set for subwoofer S.W.

Notes

! Even if you change this setting, there is no

output unless you turn the subwoofer output

on (refer to Using subwoofer output on page

38).

! If you change this setting, subwoofer output

in the audio menu return to the factory set-

tings.

! Both rear speaker leads outputs and RCA rear

output are switched simultaneously in this

setting.

Setting the FM tuning step

Normally the FM tuning step employed by

seek tuning is 50 kHz. When AF or TA is on,

the tuning step automatically changes to 100

kHz. It may be preferable to set the tuning step

to 50 kHz when AF is on.

% Touch FM STEP on the initial menu to

select the FM tuning step.

Touching FM STEP will switch the FM tuning

step between 50 kHz and 100 kHz. The se-

lected FM tuning step will appear in the dis-

play.

Note

The tuning step remains at 50 kHz during manual

tuning.

Operating this unit

Section

Operating this unit

Selecting the OSD color

You can change the OSD color.

% Touch OSD COLOR on the initial menu

to select the desired color.

Each time you touch OSD COLOR it selects

colors in the following order:

BLUE (blue)—RED (red)—AMBER (amber)—

GREEN (green)—VIOLET (violet)

Selecting the illumination color

This unit is equipped with two illumination col-

ors, blue and red. You can select the desired il-

lumination color.

% Touch ILLUMI COLOR on the initial

menu to select the desired color.

Switching Auto PI Seek

The unit can automatically search for a differ-

ent station with the same programming, even

during preset recall.

1 Touch NEXT on the initial menu.

2 Touch AUTO PI to turn Auto PI Seek on.

# To turn Auto PI Seek off, touch AUTO PI

again.

Selecting the display language

For your convenience, this unit equips multi-

ple language display. You can select the lan-

guage best suited to your first language.

1 Touch NEXT on the initial menu.

2 Touch LANGUAGE to select your de-

sired language.

PYCCКИЙ—English

Switching the sound muting/

attenuation

Sound from this system is muted or attenu-

ated automatically when the signal from the

equipment with mute function is received.

! Sound from this system returns to normal

when the muting or attenuation is can-

celed.

1 Touch NEXT on the initial menu.

2 Touch TEL to select any of the muting,

attenuation or off.

Touch TEL until the desired setting appears in

the display.

! MUTE – Muting

! ATT -20dB – Attenuation (ATT -20dB has a

stronger effect than ATT -10dB)

! ATT -10dB – Attenuation

! OFF – Turn the sound muting/attenuation

off

Notes

! The sound is turned off, MUTE is displayed

and no audio adjustments are possible.

! The sound is attenuated, ATT is displayed and

no audio adjustments, except volume control,

are possible.

! Operation returns to normal when the phone

connection is ended.

Switching the warning tone

If the front panel is not detached from the

head unit within four seconds of turning off

the ignition, a warning tone will sound. You

can turn off the warning tone.

1 Touch NEXT on the initial menu.

Operating this unit

Section

2 Touch DT.WARNING to turn warning

tone on.

# To turn warning tone off, touch DT.WARNING

again.

Setting the TV signal

When this unit is connected to a TV tuner, you

need to adjust the TV signal suitable to your

country TV signal setting.

! This function is initially set to AUTO so that

this unit automatically adjusts the TV signal

setting.

! About your country TV signal, consult with

your nearest Pioneer dealer.

1 Touch NEXT on the initial menu.

2 Touch TV SIGNAL to select an appropri-

ate TV signal.

Touching TV SIGNAL switches TV signal set-

tings in the following order:

AUTO—PAL—SECAM

Entering PIN code for Bluetooth

wireless connection

To connect your cellular phone to this unit via

Bluetooth wireless technology, you need to

enter PIN code on your phone to verify the

connection. The default code is 0000, but you

can change this in this function.

! With some Bluetooth audio players, you

may be required to enter to this unit in ad-

vance PIN code of your Bluetooth audio

player, in order to set this unit ready for a

connection from your Bluetooth audio

player.

! Only when Bluetooth adapter (e.g. CD-

BTB200) is connected to this unit, you can

operate this function.

1 Touch NEXT on the initial menu.

2 Touch PINCODE INPUT.

PIN code input display appears.

3 Touch 0 to 9 to input the PIN code of

your Bluetooth audio player.

# To cancel the inputted numbers, touch C.

4 After inputting PIN code (up to 16 di-

gits), touch ENTER.

The PIN code you entered is stored in this sys-

tem.

Correcting distorted sound

You can minimize distortion that may be

caused by the equalizer curve settings.

Setting an equalizer level high can cause dis-

tortion. If high sound is crippled or distorted,

try switching to LOW. Normally, leave the set-

ting at HIGH to ensure quality sound.

! Only when the multi-channel processor

(e.g., DEQ-P6600) is connected to this unit,

you can operate this function.

1 Touch NEXT twice on the initial menu.

2 Touch DIGITAL ATT to switch the digital

attenuator setting.

Touch DIGITAL ATT repeatedly until the de-

sired setting appears in the display.

! HIGH – High quality sound

! LOW – Minimize distortion sound

Resetting the audio functions

You can reset all audio functions except vo-

lume.

! Only when the multi-channel processor

(e.g., DEQ-P6600) is connected to this unit,

you can operate this function.

1 Touch NEXT twice on the initial menu.

2 Touch AUDIO RESET.

Operating this unit

Section

Operating this unit

3 Touch RESET.

4 Touch RESET again to reset audio func-

tions.

# To cancel resetting the audio functions, touch

CANCEL.

Other Functions

Introduction of system

adjustments

1 System menu display

Shows the system function names.

1 Touch A.MENU and then touch

SYSTEM MENU to display the system func-

tion names.

The system function names are displayed and

operable ones are highlighted.

# To go to the next group of function names,

touch NEXT.

# To return to the previous group of function

names, touch PREV.

2 Touch ESC to return to the display of

each source.

# To return to the previous display, touch BACK.

Changing the wide screen mod e

You can select a desired mode for enlarging a

4:3 picture to a 16:9 one.

1 Touch WIDE MODE on the system

menu.

2 Touch the desired wide mode setting.

3 Touch ESC to hide the touch panel keys.

Operating this unit

Section

FULL (full)

A 4:3 picture is enlarged in the horizontal direc-

tion only, giving you a 4:3 TV picture (normal pic-

ture) without any omissions.

JUST (just)

The picture is enlarged slightly at the center and

the amount of enlargement increases horizontally

to the ends, enabling you to enjoy a 4:3 picture

without sensing any disparity even on a wide

screen.

CINEMA (cinema)

The picture is enlarged by the same proportion as

FULL or ZOOM in the horizontal direction and by

an intermediate proportion between FULL and

ZOOM in the vertical direction; ideal for a cine-

ma-sized picture (wide screen picture) where cap-

tions lie outside.

ZOOM (zoom)

A 4:3 picture is enlarged in the same proportion

both vertically and horizontally; ideal for a cine-

ma-sized picture (wide screen picture).

NORMAL (normal)

A 4:3 picture is displayed as it is, giving you no

sense of disparity since its proportions are the

same as that of the normal picture.

Notes

! Different settings can be memorized for each

video source.

! When video is viewed in a wide screen mode

that does not match its original aspect ratio, it

may appear different.

! Remember that using the wide mode feature

of this system for commercial or public view-

ing purposes may constitute an infringement

on the author’s rights protected by the Copy-

right Law.

! Video will appear grainy when viewed in

CINEMA or ZOOM mode.

Changing the picture adjustment

You can adjust BRIGHTNESS (brightness),

CONTRAST (contrast), COLOR (color) and

HUE (hue) for each source and rear view cam-

era.

! The adjustments of BRIGHTNESS and

CONTRAST are stored separately for light

ambient (daytime) and dark ambient (night-

time). A sun

or moon is displayed to

the left of BRIGHTNESS and CONTRAST,

respectively, as the ambient light sensor de-

termines brightness or darkness.

! You cannot adjust COLOR or HUE for the

audio source.

1 Touch PICTURE ADJUSTMENT on the

system menu.

The adjustment function names are displayed.

2 Touch any of the following touch panel

keys to select the function to be adjusted.

! BRIGHTNESS – Adjust the black intensity

! CONTRAST – Adjust the contrast

! COLOR – Adjust the color saturation

! HUE – Adjust the tone of color (red is em-

phasized or green is emphasized)

! DIMMER – Adjust the brightness of display

! REAR VIEW CAMERA/SOURCE – Switch

the picture adjustment modes

# You cannot adjust the picture adjustment for

rear view camera when CAMERA POLARITY is

set to OFF. (Refer to Setting for rear view camera

(back up camera) on page 51.)

# With some rear view cameras, picture adjust-

ment may not be possible.

3 Touch c or d to adjust the selected

item.

Each time you touch c or d it increases or de-

creases the level of selected item. +24 to –24

is displayed as the level is increased or de-

creased.

4 Touch ESC to hide the touch panel keys.

Operating this unit

Section

Operating this unit

Adjusting the dimmer

The adjustment of DIMMER is stored sepa-

rately for each ambient light; daytime, evening

and nighttime. The brightness of LCD screen

will be adjusted to optimum level automati-

cally in accordance with the ambient light

based on the setting values.

! The icons indicating the current ambient

brightness used for adjusting BRIGHTNESS

and CONTRAST may differ from DIMMER

slightly.

1 Touch PICTURE ADJUSTMENT on the

system menu.

The adjustment function names are displayed.

2 Touch DIMMER.

The ambient light level used as the standard

for adjusting DIMMER appears above the level

bar.

! Red sun – Adjust the brightness for

bright ambient light (daytime)

! Yellow sun

– Adjust the brightness for in-

termediate brightness (evening)

! Yellow moon

– Adjust the brightness for

dark ambient light (nighttime)

3 Touch c or d to adjust the brightness.

Each time you touch c or d it moves cursor

towards the left or the right.

The level indicates the brightness of the

screen being adjusted. The farther cursor

moves to the right, the brighter the screen.

4 Touch ESC to hide the touch panel keys.

Selecting the background display

You can switch background displays while lis-

tening to each source.

! You can enjoy AV (AV input) as the back-

ground video image while you are listening

to audio source such as radio or CD.

% Touch BACKGROUND on the system

menu to select the desired background dis-

play.

Audio source

BGP1 (background picture 1)—BGP2 (back-

ground picture 2)—BGP3 (background picture

3)—AV (AV input)

Video source

OFF (off)—BGP1 (background picture 1)—

BGP2 (background picture 2)—BGP3 (back-

ground picture 3)—AV (AV input)

# When the AV (AV input) is not set to VIDEO,

AV cannot be selected. (Refer to this page.)

Setting the AV input

You can switch the setting according to the

connected component.

! Select VIDEO to watch video of a con-

nected component as AV source.

! Select S-DVD to watch video of a con-

nected DVD player as S-DVD source.

! Select EXT-VIDEO to watch video of a con-

nected video unit as EXT source.

% Touch AV INPUT on the system menu to

select the AV input setting.

! OFF – No video component connected

! VIDEO – External video component (such

as portable video player)

! S-DVD – DVD player connected with RCA

cable

! EXT-VIDEO – External video unit (such as

Pioneer products available in the future)

# When a DVD player is connected with an AV-

BUS cable, do not select S-DVD otherwise no pic-

ture will be displayed even if you select S-DVD as

a source.

Setting the clock

Use these instructions to set the clock.

1 Touch CLOCK ADJ on the system menu.

Operating this unit

Section

2 Touch ON/OFF to turn the clock display

on.

# To turn the clock display off, touch ON/OFF

again.

3 Touch c or d to select the segment of

the clock display you wish to set.

Each time you touch c or d it will select one

segment of the clock display:

Hour—Minute

As you select segments of the clock display

the segment selected will be highlighted.

4 Touch a or b to put a clock right.

Notes

! You can match the clock to a time signal by

touching JUST.

— If the minute is 00 to 29, the minutes are

rounded down. (e.g., 10:18 becomes

10:00.)

— If the minute is 30 to 59, the minutes are

rounded up. (e.g., 10:36 becomes 11:00.)

! Even when the sources are off, the clock dis-

play appears on the display.

Setting for rear view camera

(back up camera)

CAUTION

Pioneer recommends the use of a camera

which outputs mirror reversed images, other-

wise screen image may appear reversed.

This unit features a function that automatically

switches to the rear view camera video (REAR

VIEW CAMERA IN jack) when a rear view

camera is installed on your vehicle. When the

gear shift is in REVERSE (R) position, the

video automatically switches to a rear view

camera video. (For more details, consult your

dealer.)

! After you set up the rear view camera set-

ting, move the gear shift in REVERSE (R)

and confirm if a rear view camera video

can be shown on the display.

! If the display should be switched to a rear

view camera video by error while you are

driving forward, change the rear view cam-

era setting.

! To end watching a rear view camera video

and return to the source display, press and

hold DISPLAY.

% Touch CAMERA POLARITY on the sys-

tem menu to select an appropriate setting.

! BATTERY – When the polarity of the con-

nected lead is positive while the gear shift

is in REVERSE (R) position

! GROUND – When the polarity of the con-

nected lead is negative while the gear shift

is in REVERSE (R) position

! OFF – When a rear view camera is not con-

nected to this unit

Adjusting the LCD panel slide

position

You can adjust the LCD panel slide position so

that the panel is set back or forward.

1 Touch NEXT on the system menu.

2 Touch FLAP SET BACK to turn the set

back on.

The LCD panel slides to the back.

# Touch FLAP SET BACK again to turn the set

back off and the LCD panel slides to the front.

Operating this unit

Section

Operating this unit

Setting the automatic open

function

To prevent the display from hitting the shift

lever of an automatic vehicle when it is in P

(park) position, or when you do not wish the

display to open/close automatically, you can

set the automatic open function in the manual

mode.

1 Touch NEXT on the system menu.

2 Touch AUTO FLAP to select the display

to open/close automatically or manually.

Each time you touch AUTO FLAP it switches

between the following settings:

! ON – The LCD panel will be opened or

closed automatically with the turning of the

ignition switch on or off

! OFF – You have to press OPEN/CLOSE to

open/close the LCD panel

Switching the iPod charge setting

You can turn the iPod charge setting on or off

while listening to an iPod.

! Listening MW radio while an iPod is

charged from this unit may generate noise.

In this case, turn the iPod charge setting

off and noise is disappeared.

1 Touch NEXT on the system menu.

2 Touch iPod CHARGE to turn the iPod

charge setting on.

# To turn the iPod charge setting off, touch

iPod CHARGE again.

Note

To obtain maximum performance, we recom-

mend that you use the latest version of the iPod

software.

Adjusting the response

positions of the touch panels

(Touch Panel Calibration)

If you feel that the touch panel keys on the

screen deviate from the actual positions that

respond to your touch, adjust the response po-

sitions of the touch panel. There are two ad-

justment methods: 4-point adjustment, in

which you touch four corners of the screen;

and 16-point adjustment, in which you make

fine-adjustments on the entire screen.

! Make sure to use the supplied pen for ad-

justment, and gently touch the screen. If

you press the touch panel forcefully, the

touch panel may be damaged. Do not use

a sharp pointed tool such as ballpoint pen

or a mechanical pen. Otherwise the screen

is damaged.

! If touch panel adjustment cannot be per-

formed properly, consult your local Pioneer

dealer.

1 Touch the source icon and then touch

OFF to turn this unit off.

# When the source icon is not displayed, you

can display it by touching the screen.

2 Press and hold BAND/ESC.

The 4-point touch panel adjustment screen ap-

pears.

3 Touch each of the arrows on the four

corners of the screen with the touch panel

adjustment pen.

# To cancel the adjustment, press and hold

VOLUME/ATT.

4 Press BAND/ESC to complete the 4-

point adjustment.

The adjusted position data is saved.

# Do not turn off the engine while saving the ad-

justed position data.

Operating this unit

Section

5 Press BAND/ESC to proceed to the 16-

point adjustment.

The 16-point touch panel adjustment screen

appears.

# To cancel the adjustment, press and hold

VOLUME/ATT.

6 Gently touch the center of the + mark

displayed on the screen with the touch

panel adjustment pen.

After you touch all the marks, the adjusted po-

sition data is saved.

# Do not turn off the engine while saving the ad-

justed position data.

7 Press and hold VOLUME/ATT to com-

plete the adjustment.

Using the AUX source

This unit can control an auxiliary equipment

such as VCR or portable device (sold sepa-

rately). When connected, auxiliary equipment

is automatically recognized as AUX source

and assigned to AUX.

About AUX connection method

You have two methods to connect auxiliary

equipment to this unit.

Mini pin plug cable (AUX 1)

When connecting auxiliary equipment using a

mini plug cable

iPod and portable audio/video player can be

connected to this unit via mini plug cable.

! If an iPod with video capabilities is con-

nected to this unit via 3.5 mm plug (4 pole)

cable (e.g., CD-V150M), you can enjoy the

video contents of the iPod.

! It is possible to connect a portable audio/

video player by using a 3.5 mm plug (4

pole) to RCA cable, which is sold sepa-

rately. However, depending on the cable, re-

verse connection between Red (right side

audio) cable and yellow (video) cable is re-

quired. Otherwise, audio and video may not

be correctly reproduced.

% Insert the mini plug into the micro-

phone/auxiliary input jack on this unit.

For more details, refer to the installation man-

ual.

IP-BUS-RCA interconnector (AUX 2)

When connecting auxiliary equipment using an

IP-BUS-RCA Interconnector (sold separately)

% Use an IP-BUS-RCA Interconnector such

as the CD-RB20 (sold separetely) to connect

this unit to auxiliary equipment featuring

RCA output.

For more details, refer to the IP-BUS-RCA Inter-

connector owner’s manual.

# You can only make this type of connection if

the auxiliary equipment has RCA outputs.

Selecting AUX as the source

% Touch the source icon and then touch

AUX 1/AUX 2 to select AUX as the source.

# If the auxiliary setting is not turned on, AUX

cannot be selected. For more details, see Switch-

ing the auxiliary setting on page 45.

Setting the AUX title

The title displayed for the AUX source can be

changed.

! Each title can be up to 10 characters long.

1 After you have selected AUX as the

source, touch A.MENU and

FUNCTION MENU and then touch

NAME EDIT.

# When the touch panel keys are not displayed,

you can display them by touching the screen.

Operating this unit

Section

Operating this unit

2 Touch ABC to select the desired charac-

ter type.

Touch ABC repeatedly to switch between the

following character types:

Alphabet (upper case)—Alphabet (lower case)

—European letters, such as those with ac-

cents (e.g., á, à, ä, ç)

# You can select to input numbers and symbols

by touching 123.

3 Touch a or b to select a letter of the al-

phabet.

4 Touch d to move the cursor to the next

character position.

5 Touch OK to store the entered title in

memory.

6 Touch ESC to return to the ordinary dis-

play.

Using the PGM button

You can operate the preprogrammed functions

for each source by using PGM on the remote

control.

! Only the optional remote control (e.g., CD-

R55) can operate this function.

% Press PGM to turn pause on when se-

lecting the following sources:

! DVD – Built-in DVD player

! iPod – iPod

! USB – USB portable audio player/USB

memory

! S-DVD – DVD player/multi-DVD player

! MCD – Multi-CD player

! BT Audio – Bluetooth audio player

# To turn pause off, press PGM again.

% Press PGM and hold to turn BSM on

when selecting RADIO as the source.

Press PGM and hold until the BSM turns on.

# To cancel the storage process, press PGM

again.

% Press PGM and hold to turn BSSM on

when selecting TV as the source.

Press PGM and hold until the BSSM turns on.

# To cancel the storage process, press PGM

again.

Operating this unit

Section

Playing songs on USB portable

audio player/USB memory

Basic Operations

You can use this unit to control a USB adapter

(e.g., CD-UB100), which is sold separately.

For details concerning operation, refer to the

USB adapter’s operation manual. This section

provides information on USB portable audio

player/USB memory operations with this unit

which differs from that described in the USB

adapter’s operation manual.

! Optimum performance of this unit may not

be obtained depending on the connected

USB portable audio player/USB memory.

1 Source icon

2 Media indicator

Shows the type of file currently playing.

3 Folder number indicator

4 Folder name indicator

5 File number indicator

6 Play time indicator

7 Song information

Shows detailed information of currently play-

ing song.

1 Touch the source icon and then touch

USB to select the USB.

# When the source icon is not displayed, you

can display it by touching the screen.

2 Touch a or b to select a folder.

# To return to folder 01 (ROOT), press and hold

BAND/ESC. However, if folder 01 (ROOT) contains

no files, playback commences with folder 02.

# You cannot select a folder that does not have

a compressed audio file recorded in it.

3 To perform fast forward or reverse,

keep touching o or p.

4 To skip back or forward to another

compressed audio file, briefly touch o or

Pausing compressed audio

playback

% Touch de during playback.

# To resume playback at the same point that you

turned pause on, touch de again.

# If you perform track search during pause, text

information such as album title, track title or

folder name appear in blank.

Introduction of advanced

operations

1 Touch A.MENU and then touch

FUNCTION MENU to display the function

names.

The function names are displayed and oper-

able ones are highlighted.

2 Touch ESC to return to the playback dis-

play.

# To return to the previous display, touch BACK.

Function and operation

REPEAT, RANDOM and SCAN operations are

basically the same as that of the built-in DVD

player.

Available accessori es

Section

Available accessories

Function name Operation

REPEAT

Refer to Repeating play on page 32.

But the repeat play ranges you can

select are different from that of the

built-in DVD player. The repeat play

ranges of the USB portable audio

player/USB memory are as below:

! FILE – Repeat just the current

file

! FOLDER – Repeat the current

folder

! ALL – Repeat all files

RANDOM

Refer to Playing tracks in random

order on page 32.

SCAN

Refer to Scanning tracks or folders

on page 33.

Notes

! If you select another folder during repeat play,

the repeat play range changes to ALL.

! If you perform track search or fast for ward/re-

verse during FILE, the repeat play range

changes to FOLDER.

! When FOLDER is selected, it is not possible to

play back a subfolder of that folder.

! After file or folder scanning is finished, nor-

mal playback of the files will begin again.

Displaying text information of

an audio file

The operation is the same as that of the built-

in DVD player.

Refer to Text information on page 31.

! If the characters recorded on the audio file

are not compatible with this unit, those

characters will not be displayed.

Selecting files from the file

name list

The operation is the same as that of the built-

in DVD player.

Refer to Selecting files from the file name list

on page 31.

Bluetooth Audio

Basic Operations

If you connect Bluetooth adapter (e.g. CD-

BTB200) to this unit, you can control Bluetooth

audio player via Bluetooth wir eless technology.

Important

! Depending on the Bluetooth audio player con-

nected to this unit, the available operations

with this unit are limited to the following two

levels:

— Lower level: Only playing back songs on

your audio player is possible.

— Higher level: Playing back, pausing, select-

ing songs, etc., are possible (all the opera-

tions illustrated in this manual).

! Since there are a number of Bluetooth audio

players available on the market, operations

with your Bluetooth audio player using this

unit vary in great range. Please refer to the in-

struction manual that came with your Blue-

tooth audio player as well as this manual

while operating your player on this unit.

! Information about songs (e.g. the elapsed

playing time, song title, song index, etc.) can-

not be displayed on this unit.

! While you are listening to songs on your Blue-

tooth audio player, please refrain from operat-

ing on your cellular phone as much as

possible. If you try operating on your cellular

phone, the signal from your cellular phone

may cause a noise on the song playback.

! When you are talking on the cellular phone

connected to this unit via Bluetooth wireless

technology, the song playback from your Blue-

tooth audio player connected to this unit is

muted.

! Even if while you are listening to song on your

Bluetooth audio player you switch to another

source, the playback of song continues to

elapse.

Available accessori es

Section

For details concerning operation, refer to the

Bluetooth adapter’s operation manual. This

section provides brief information on Blue-

tooth audio player operations with this unit

which slightly differes or is cut short from that

described in the Bluetooth adapter’s operation

manual.

! Even though your audio player does not

contain a Bluetooth module, you can still

control it from this unit via Bluetooth wire-

less technology. To control your audio

player by using this unit, connect a product

featuring Bluetooth wireless technology

(available on the market) to your audio

player and connect Bluetooth adapter (e.g.

CD-BTB200) to this unit.

1 Source icon

2 Device name

Shows the device name of the connected

Bluetooth audio player (or Bluetooth adapter).

3 Connection indicator

Shows the Bluetooth wireless connection sta-

tus.

1 Touch the source icon and then touch

BT Audio to select the Bluetooth audio

source.

# For this unit to control your Bluetooth audio

player it needs to establish a Bluetooth wireless

connection. (Refer to Connecting a Bluetooth

audio player on this page.)

2 Touch d.

Playback starts.

3 To skip back or forward to another

track, briefly touch o or p.

4 To perform fast forward or reverse,

keep touching o or p.

5 To stop playback, touch g.

Pausing playback

% Touch e during playback.

# To resume playback at the same point that you

turned pause on, touch d.

Introduction of advanced

operations

1 Touch A.MENU and then touch

FUNCTION MENU to display the function

names.

The function names are displayed and oper-

able ones are highlighted.

2 Touch ESC to return to the ordinary dis-

play.

# To return to the previous display, touch BACK.

Connecting a Bluetooth audio

player

% Touch CONNECTION OPEN on the func-

tion menu to turn the connection open on.

CONNECTION WAITING is displayed. This

unit is now on standby for connection from

Bluetooth audio player.

If your Bluetooth audio player is set ready for

Bluetooth wireless connection, connection to

this unit will be automatically established.

Available accessori es

Section

Available accessories

Note

Before you can use audio players you may need

to enter the PIN code into this unit. If your player

requires a PIN code to establish a connection,

look for the code on the player or in its accompa-

nying documentation. Enter the PIN code refer-

ring to Entering PIN code for Bluetooth wireless

connection on page 47.

Disconnecting a Bluetooth

audio player

% Touch DISCONNECT on the function

menu.

After the disconnection is completed,

NO CONNECTION is displayed.

Displaying BD (Bluetooth

Device) address

% Touch DEVICE INFO on the function

menu to display the BD address.

Various information regarding the Bluetooth

wireless technology are displayed.

! DEVICE NAME (device name of this sys-

tem)

! BD ADDRESS (address of Bluetooth device)

! SYSTEM VERSION (system version)

! BT MODULE VERSION (version of Blue-

tooth module)

Bluetooth Telephone

Basic Operations

If you use Bluetooth adapter (e.g. CD-BTB200),

you can connect a cellular phone featuring

Bluetooth wireless technology to this unit for

hands-free, wireless calls, even while driving.

Important

! Since this unit is on standby to connect with

your cellular phones via Bluetooth wireless

technology, using this unit without running

the engine can result in battery drainage.

! Advanced operations that require your atten-

tion such as dialing numbers on the monitor,

using phone book, etc., are prohibited while

you are driving. When you need to use these

advanced operations, stop your vehicle in a

safe place and operate.

For details concerning operation, refer to the

Bluetooth adapter’s operation manual. This

section provides brief information on the

hands-free phoning operations with this unit

which slightly differes or is cut short from that

described in the Bluetooth adapter’s operation

manual.

! This unit is not compatible with registration

for guest phone.

! This unit does not have the name edit func-

tion of a Phone Book entry.

1 Source icon

2 User number indicator

Available accessori es

Section

Shows the registration number of the cellular

phone.

3 Device name

Shows the device name of the cellular phone.

4 Phone number

Shows the phone number you selected.

5 Voice recognition indicator

Shows when the voice recognition function is

on (for more details, refer to Voice recognition

on the next page).

6 Incoming call notice indication

Shows when an incoming call has been re-

ceived and not checked yet.

! Incoming call notice is not displayed for

calls made when your cellular phone is

disconnected from this unit.

7 Automatic answering/Automatic rejecting in-

dicator

Shows when the automatic answering func-

tion is on (for more details, refer to Setting the

automatic answering on page 65).

Shows when the automatic rejecting function

is on (for more details, refer to Setting the

automatic rejecting on page 65).

8 Battery strength indicator

Shows the battery strength of cellular phone.

! Battery strength indicator may differ

from the actual battery strength.

! If the battery strength is not available,

nothing is displayed in the battery

strength indicator area.

9 Signal level indicator

Shows the signal strength of cellular phone.

! Signal level indicator may differ from

the actual signal level.

! Depending on the cellular phones fea-

turing Bluetooth wireless technology,

radio field intensity is not available. In

this case, the signal level indicator does

not appear.

! If your cellular phone is out of service,

is displayed.

a Telephone indicator

Shows when a phone connection using Blue-

tooth wireless technology is established (for

more details, refer to Connecting a cellular

phone on the next page).

! While connecting automatically, tele-

phone indicator is flashing.

% Touch the source icon and then touch

TEL to select the telephone.

Note

Equalizer curve for the phone source is fixed.

When selecting the phone source, you cannot op-

erate the equalizer function. Refer to Recalling

equalizer curves on page 37.

When the multi-channel processor is connected

to this unit, you can operate the equalizer func-

tion even when selecting the phone source. Refer

to Recalling equalizer curves on page 80.

Setting up for hands-free phoning

Before you can use the hands-free phoning

function you will need to set up the unit for

use with your cellular phone. This entails es-

tablishing a Bluetooth wireless connection be-

tween this unit and your phone, registering

your phone with this unit, and adjusting the

volume level.

1 Connection

For detailed instructions on connecting your

phone to this unit via Bluetooth wireless tech-

nology, refer to Connecting a cellular phone on

the next page.

# Your phone should now be temporarily con-

nected; however, to make best use of the technol-

ogy, we recommend you register the phone to

this unit.

2 Registration

To register your temporarily connected phone,

refer to Registering connected cellular phone

on page 61.

Available accessori es

Section

Available accessories

3 Volume adjustment

Adjust the earpiece volume on your cellular

phone for comfort. When adjusted, the volume

level is memorized in this unit as the default

setting.

# Caller’s voice volume and ring volume may

vary depending on the type of cellular phones.

# If the difference between the ring volume and

caller’s voice volume is big, overall volume level

may become unstable.

# Before disconnecting cellular phone from this

unit, make sure to adjust the volume to proper

level. If the volume has been muted (zero level)

on your cellular phone, the volume level of your

cellular phone remains muted even after the cel-

lular phone is disconnected from this unit.

Making a phone call

Voice recognition

1 Touch VOICE to turn the voice recogni-

tion function on.

Voice dial icon appears on the information bar.

Voice recognition function is now ready.

# To cancel the voice recognition function,

touch VOICE again.

2 Pronounce the name of your contact.

Taking a phone call

Answering an incoming call

1 When a call comes in, touch .

# You can also perform this operation by press-

ing o.

# If the private mode is selected on the cellular

phone, hands-free phoning may not be per-

formed.

2 To end the call, touch .

# You can also perform this operation by press-

ing p.

Rejecting an incoming call

% When a call comes in, touch .

The call is rejected.

Answering a call waiting

1 Touch to answer a call waiting.

2 Touch

to end all calls.

# The caller you have been talking to is now on

hold. To end the call, both you and your caller

need to hang up the phone.

# While your callers hold the line, touching

switches between callers.

Rejecting a call waiting

% Touch to reject a call waiting.

Introduction of advanced

operations

1 Touch A.MENU and then touch

FUNCTION MENU to display the function

names.

The function names are displayed and oper-

able ones are highlighted.

2 Touch ESC to return to the telephone

standby display.

# To return to the previous display, touch BACK.

Connecting a cellular phone

Searching for available cellular phones

1 Touch PHONE CONNECT on the function

menu.

Available accessori es

Section

2 Touch SEARCH to search for available

cellular phones.

While searching, SEARCHING flashes. When

available cellular phones featuring Bluetooth

wireless technology are found, device names

or Name Not Found (if names cannot be ob-

tained) are displayed.

# If this unit fails to find any available cellular

phones, NOT FOUND is displayed.

# You can display the BD address by touching

BD ADDR. To return to the device name, touch

PHONE NAME.

3 Touch the device name you want to

connect.

While connecting, CONNECTING flashes. To

complete the connection, please check the de-

vice name (Pioneer BT unit2) and enter the

link code on your cellular phone. If the con-

nection is established, CONNECTED is dis-

played.

# The link code is set to 0000 as default. You

can change this code in the initial setting. Refer

to Entering PIN code for Bluetooth wireless con-

nection on page 47.

Using a cellular phone to initiate a

connection

1 Touch PHONE CONNECT on the function

menu.

2 Touch CONNECTION OPEN.

CONNECTION WAITING flashes and the unit

is now on standby for connection from cellular

phone.

3 Use cellular phone to connect to this

unit.

# To cancel this function, touch

CONNECTION OPEN again.

# The link code is set to 0000 as default. You

can change this code in the initial setting. Refer

to Entering PIN code for Bluetooth wireless con-

nection on page 47.

Disconnecting a cellular phone

1 Touch PHONE CONNECT on the function

menu.

2 Touch DISCONNECT to disconnect the

currently connected cellular phone from

this unit.

After the disconnection is completed,

NO CONNECTION is displayed.

Registering connected cellular

phone

1 Touch PHONE REGISTER on the function

menu.

Registration assignments for user phone 1, 2

and 3 appear on the display.

2 Touch and hold one of the registration

assignments to register the currenctly con-

nected phone.

If the registration is succeeded, the device

name of the connected phone is displayed in

the selected assignment.

# If the assignment is empty, the device name is

not displayed. If the assignment is already taken,

the device name appears. To replace an assign-

ment with a new phone, first delete the current

assignment. For more detailed instructions, see

Deleting a registered phone on this page.

# If the registration failed, device name of the

connected phone is not displayed in the selected

assignment. In this case, return to step 1 and try

again.

Deleting a registered phone

1 Touch PHONE REGISTER on the function

menu.

Available accessori es

Section

Available accessories

2 Touch DELETE next to the device name

you want to delete.

A confirmation display appears. Touch OK to

delete the phone.

# To cancel deleting a registered phone, touch

CANCEL.

Connecting to a registered

cellular phone

Connecting to a registered phone

manually

1 Touch PHONE CONNECT on the function

menu.

2 Touch DIRECT CONNECT.

3 Touch the device name you want to

connect.

While connecting, CONNECTING is flashing.

If the connection is established, CONNECTED

is displayed.

Connecting to a registered phone

automatically

1 Touch NEXT on the function menu.

2 Touch AUTO CONNECT to turn the

Automatic Connection function on.

If your cellular phone is set ready for Bluetooth

wireless connection, the connection to this

unit will be automatically established.

# To turn automatic connection off, touch

AUTO CONNECT again.

Using the Phone Book

Transferring entries to the Phone Book

The Phone Book can hold a total of 500 en-

tries; 300 from User 1, 150 from User 2, and 50

from User 3.

1 Touch PHONE BOOK TRANSFER on the

function menu.

2 Touch START to turn the Phone Book

Transfer function on.

The Phone Book Transfer is now on standby.

3 Use cellular phone to perform phone

book transfer.

Perform phone book transfer using the cellu-

lar phone. For detailed instruction on this,

refer to the instruction manual that came with

your cellular phone.

# The display indicates how many entries have

been transferred and the total number to be

transferred.

# To cancel the transferring process, touch

STOP.

4 When you are done transferring Phone

Book entries, touch ESC.

Note

When the phone book transfer is complete, the

connection to your cellular phone is off. To use

the Phone Book, connect to your cellular phone

once again, referring to Connecting to a registered

cellular phone on this page.

Changing the Phone Book display order

% Touch PHONE BOOK NAME VIEW on

the function menu to change the name

view order.

INVERTED is displayed and the name view

order is changed.

# To change to the other display order, touch

PHONE BOOK NAME VIEW again.

Available accessori es

Section

Calling a number in the Phone Book

Important

To perform this operation, be sure to park your ve-

hicle and apply the parking brake.

1 Touch PHONE BOOK to display the

Phone Book.

2 Touch a or b to select the first letter of

the name you are looking for.

Touching a or b changes alphabetical letters.

3 Touch ENTER to show entries starting

with the letter you chose.

The display shows the first six Phone Book en-

tries starting with that letter (e.g. “Ben”,

“Brian” and “Burt” when “B” is selected).

# Touch or to display other phone book en-

tries.

# To refine the search with a different letter,

touch CLEAR.

4 Touch a Phone Book entry you want to

call.

The display is switched to the Phone Book de-

tail display.

5 Touch phone number of the Phone

Book entry you want to call.

If several phone numbers are entered to an

entr y, touch one you want to call.

The display returns to the normal display and

the Phone Book entry you selected is dis-

played on the information bar.

6 Touch

to make a call.

# For an international call, touch add “+” to add

+ to the phone number.

7 To end the call, touch .

Editing phone numbers

Important

To perform this operation, be sure to park your ve-

hicle and apply the parking brake.

You can edit the numbers of Phone Book en-

tries. Each phone number can be up to 24 di-

gits long.

1 Touch PHONE BOOK to display the

Phone Book.

2 Select a Phone Book entry you want to

edit.

See step two to four on Calling a number in the

Phone Book on this page for how to do this.

3 Touch EDIT next to the phone number

you want to edit.

The display is changed to the Phone Book dial

edit display.

4 Touch 0 to 9 to input numbers.

# For an international call, touch add “+” to add

+ to the phone number.

# Touch CLEAR to delete the number. Touch and

hold CLEAR to delete all the input numbers.

5 Touch OK to store the new number.

Clearing a Phone Book entry

Important

To perform this operation, be sure to park your ve-

hicle and apply the parking brake.

1 Touch PHONE BOOK to display the

Phone Book.

2 Select a Phone Book entry you want to

delete.

See step two to four on Calling a number in the

Phone Book on this page for how to do this.

Available accessori es

Section

Available accessories

3 Touch DELETE to delete the Phone Book

entry.

A confirmation display appears. Touch YES to

delete the entry.

# If you do not want to clear a Phone Book entry

that you have selected, touch NO.

Using the Call History

Important

To perform this operation, be sure to park your ve-

hicle and apply the parking brake.

The 6 most recent calls made (dialled), re-

ceived and missed, are stored in the Call His-

tory. You can browse the Call History and call

numbers from it.

1 Touch LOG to display the Call History.

Touching LOG repeatedly switches between

the following call histories:

MISSED CALL LIST (missed call)—

DIALED CALL LIST (dialled call)—

RECEIVED CALL LIST (received call)

# You can switch between phone number and

name (if entered) by touching ABC/123.

# If no phone numbers have been stored in the

selected list, nothing is displayed.

2 Touch a phone number or name (if en-

tered) you want to call.

The display returns to the normal display and

the phone number you selected is displayed

on the information bar.

3 Touch

to make a call.

# For an international call, touch add “+” to add

+ to the phone number.

4 To end the call, touch .

Using preset numbers

Important

To perform this operation, be sure to park your ve-

hicle and apply the parking brake.

Assigning preset numbers

Numbers that you dial frequently can be as-

signed to presets for quick recall.

You can assign up to 6 frequently called phone

numbers to number presets.

1 Select a desired phone number from

the Phone Book or the Call History. Or di-

rectly enter a desired phone number.

To select a desired phone number from the

Phone Book or the Call History, see the in-

structions explained in previous pages. To di-

rectly enter a desired phone number, see

Making a call by entering phone number on the

next page.

The display should now be the normal display

and the selected phone number is displayed

on the information bar.

2 Touch LIST to display preset assign-

ments.

Preset assignments appear in the display (if

not displayed yet).

3 Keep touching one of preset assign-

ments to store the phone number.

The phone number you selected is stored in

presets.

# No Data is displayed for empty assignment.

Even if the assignment is taken, you can replace

it to the new one by keeping touching the assign-

ment.

Recalling preset numbers

1 Touch LIST to display preset assign-

ments.

Preset assignments appear in the display (if

not displayed yet).

Available accessori es

Section

2 Touch one of preset assignments.

The selected phone number should now be

displayed on the information bar.

3 Touch

to make a call.

4 To end the call, touch

Making a call by entering

phone number

Important

To perform this operation, be sure to park your ve-

hicle and apply the parking brake.

1 Touch DIRECT to display the direct dial

display.

2 Touch 0 to 9 to input numbers.

# For an international call, touch add “+” to add

+ to the phone number.

# Touch CLEAR to delete the number. Touch and

hold CLEAR to delete all the input numbers.

# Up to 24 digits can be entered.

# If you want to store the entered phone number

to preset assignment, touch SET here. The display

returns to the normal display and the phone num-

ber you entered is selected.

3 When you completed entering the

number, touch

to make a call.

4 To end the call, touch

Clearing memory

1 Touch CLEAR MEMORY on the function

menu.

2 Touch CLEAR next to the item you want

to delete from the memory.

Select from the following:

! PHONE BOOK (phone book)

! DIALED CALLS (dialled call history)

! RECEIVED CALLS (received call history)

! MISSED CALLS (missed call history)

! DIAL PRESET (preset phone numbers)

After selecting a desired item, a confirmation

display appears. Touch OK to delete the mem-

or y.

# If you do not want to clear memory that you

have selected, touch CANCEL.

# If you want to clear all the Phone Book,

dialled/received/missed call history list and pre-

set phone number, touch CLEAR ALL.

Setting the automatic answering

% Touch AUTO ANSWER on the function

menu to turn the automatic answer on.

# To turn the automatic answer off, touch

AUTO ANSWER again.

Setting the automatic rejecting

1 Touch NEXT on the function menu.

2 Touch REFUSE ALL CALLS to turn the

automatic call rejection on.

# To turn the automatic call rejection off, touch

REFUSE ALL CALLS again.

Switching the ring tone

1 Touch NEXT on the function menu.

2 Touch RING TONE to turn the ring tone

on.

# To turn the ring tone off, touch RING TONE

again.

Echo canceling and noise reduction

1 Touch NEXT on the function menu.

2 Touch ECHO CANCEL to turn Echo Can-

cel function on.

# To turn echo canceling off, touch

ECHO CANCEL again.

Available accessori es

Section

Available accessories

Displaying BD (Bluetooth

Device) address

Displaying BD address of this system

1 Touch NEXT on the function menu.

2 Touch DEVICE INFO to display the BD

address.

Various information regarding the Bluetooth

wireless technology are displayed.

! DEVICE NAME (device name of this sys-

tem)

! BD ADDRESS (address of Bluetooth device)

! SYSTEM VERSION (version of this unit’s

microprocessor)

! BT MODULE VERSION (version of Blue-

tooth module)

Displaying BD address of your

cellular phone

1 Touch PHONE CONNECT on the function

menu.

2 Touch BD ADDRESS to display the BD

address.

12-digit hexadecimal string is displayed.

# To return to the device name, touch

PHONE NAME.

Multi-CD Player

Basic Operations

You can use this unit to control a multi-CD

player, which is sold separately.

! This unit does not have ITS playlist, disc title

and track title list functions.

! Only those functions described in this man-

ual are supported by 50-disc multi-CD

players.

! This unit is not designed to operate disc title

list functions with a 50-disc multi-CD player.

1 Source icon

2 Disc number indicator

3 Disc title indicator

Shows the title of the currently playing disc

only when playing CD TEXT discs.

4 Track number indicator

5 Play time indicator

1 Touch the source icon and then touch

MCD to select the multi-CD player.

2 Touch a or b to select a disc.

3 To skip back or forward to another

track, briefly touch o or p.

# You can also skip back or forward to another

track by pressing o or p.

4 To perform fast forward or reverse,

keep touching o or p.

# You can also perform fast reverse/fast forward

by pressing and holding o or p.

Available accessori es

Section

Notes

! When the multi-CD player performs the pre-

paratory operations, READY is displayed.

! If an error message such as ERROR-02-XX is

displayed, refer to the multi-CD player owner’s

manual.

! If there are no discs in the multi-CD player ma-

gazine, NO DISC is displayed.

Selecting a disc

1 Touch LIST.

2 Touch your favorite disc.

Selectable discs are highlighted.

3 Touch ESC to return to the ordinary dis-

play.

Pausing CD playback

% Touch de during playback.

# To resume playback at the same point that you

turned pause on, touch de again.

Introduction of advanced

operations

You can use these functions only with a multi-

CD player that supports them.

1 Touch A.MENU and then touch

FUNCTION MENU to display the function

names.

The function names are displayed and oper-

able ones are highlighted.

2 Touch ESC to return to the playback dis-

play.

# To return to the previous display, touch BACK.

Function and operation

REPEAT, RANDOM, SCAN and

COMPRESSION operations are basically the

same as that of the built-in DVD player.

Function name Operation

REPEAT

Refer to Repeating play on page 32.

But the repeat play ranges you can

select are different from that of the

built-in DVD player. The repeat play

ranges of the multi-CD player are

as below:

! MULTI-CD – Repeat all discs in

the multi-CD player

! TRACK – Repeat just the cur-

rent track

! DISC – Repeat the current disc

RANDOM

Refer to Playing tracks in random

order on page 32.

SCAN

Refer to Scanning tracks or folders

on page 33.

COMPRESSION

Refer to Using compression on

page 33.

Multi-CD player has COMP (com-

pression) and DBE (dynamic bass

emphasis) functions.

The settings can be switched as

below:

OFF—COMP1—COMP2—OFF—

DBE 1—DBE 2

Notes

! If you select other discs during repeat play,

the repeat play range changes to MULTI-CD.

! If you perform track search or fast for ward/re-

verse during TRACK, the repeat play range

changes to DISC.

! After track or disc scanning is finished, nor-

mal playback of the tracks will begin again.

! If the multi-CD player does not support

COMP/DBE, you cannot operate this function.

Using CD TEXT functions

You can use these functions only with a CD

TEXT compatible multi-CD player.

Available accessori es

Section

Available accessories

The operation is the same as that of the built-

in DVD player.

Refer to Text information on page 31.

DVD Player

Basic Operations

You can use this unit to control a DVD player or

multi-DVD player, which is sold separately.

For details concerning operation, refer to the

DVD player’s or multi-DVD player’s operation

manual. This section provides information on

DVD operations with this unit which differs

from that described in the DVD player’sor

multi-DVD player’s operation manual.

! This unit does not have ITS playlist and disc

title functions.

1 Source icon

2 Media indicator

3 Disc number indicator

Shows the disc number currently playing

when using a multi-DVD player.

4 Title/Folder number indicator

5 Chapter/track number indicator

6 Play time indicator

7 Variable message area

Shows the text information of disc currently

playing when playing a compressed audio

disc.

! This unit cannot display the text infor-

mation recorded on a CD TEXT disc

playing on the optional DVD player.

1 Touch the source icon and then touch

S-DVD to select the DVD player.

# When the source icon is not displayed, you

can display it by touching the screen.

Available accessori es

Section

2 Touch the screen to display the touch

panel keys.

3 To skip back or forward to another

chapter/track, briefly touch o or p.

# You can also skip back or forward to another

chapter/track by pressing o or p.

4 To perform fast forward or reverse,

keep touching o or p.

# You can also perform fast reverse/fast forward

by pressing and holding o or p.

Note

If you do not use the touch panel keys within 30

seconds, they will be hidden automatically when

playing DVD video or Video CD.

Selecting a disc

! You can operate this function only when a

multi-DVD player is connected to this unit.

1 Touch LIST.

2 Touch your favorite disc.

Selectable discs are highlighted.

3 Touch ESC to return to the ordinary dis-

play.

Note

You can also select a disc by keeping touching a

or b.

Selecting a folder

! You can operate this function only when a

DVD player which is corresponding to com-

pressed audio playback is connected to

this unit.

% Touch a or b to select a folder.

Pausing disc playback

% Touch de during playback.

# To resume playback at the same point that you

turned pause on, touch de again.

Introduction of advanced

operations

1 Touch A.MENU and then touch

FUNCTION MENU to display the function

names.

The function names are displayed and oper-

able ones are highlighted.

2 Touch ESC to return to the playback dis-

play.

# To return to the previous display, touch BACK.

Function and operation

REPEAT, RANDOM and SCAN operations are

basically the same as that of the built-in DVD

player.

Available accessori es

Section

Available accessories

Function name Operation

REPEAT

Refer to Repeating play on page 32.

But the repeat play range that you

can select is vary depending on

the type of disc or system. The re-

peat play ranges of the DVD

player/multi-DVD player are as

below:

During PBC playback of Video

CDs, this function cannot be oper-

ated.

! DISC – Repeat the current disc

! FOLDER – Repeat the current

folder

! TITLE – Repeat just the current

title

! CHAPTER – Repeat just the

current chapter

! TRACK – Repeat just the cur-

rent track

RANDOM

Refer to Playing tracks in random

order on page 32.

SCAN

Refer to Scanning tracks or folders

on page 33.

Notes

! If you select other discs during repeat play,

the repeat play range changes to DISC.

! When playing back Video CD or CD, if you per-

form track search or fast forward/reverse dur-

ing TRACK, the repeat play range changes to

DISC.

! When playing back compressed audio, if you

select another folder during repeat play, the

repeat play range changes to DISC.

! When playing back compressed audio, if you

perform track search or fast forward/reverse

during TRACK, the repeat play range changes

to FOLDER.

Displaying text information of an

audio file

The operation is the same as that of the built-

in DVD player.

Refer to Text information on page 31.

! If the characters recorded on the audio file

are not compatible with this unit, those

characters will not be displayed.

Selecting files from the file name list

! You can operate this function only when a

DVD player which is corresponding to com-

pressed audio playback is connected to

this unit.

1 Touch LIST to display the list of folder

and file names.

DISC LIST (disc list)—FOLDER&FILE LIST

(folder and file list)

2 Select the desired file name (or folder

name).

The operation is the same as that of the built-

in DVD player.

Refer to Selecting files from the file name list

on page 31.

Available accessori es

Section

TV tuner

Basic Operations

You can use this unit to control a TV tuner (e.g.

GEX-P5700TVP), which is sold separately.

For details concerning operation, refer to the

TV tuner’s operation manual. This section pro-

vides information on TV operations with this

unit which differs from that described in the

TV tuner’s operation manual.

1 Source icon

2 Band indicator

3 Preset number indicator

4 Channel indicator

1 Touch the source icon and then touch

TV to select the TV.

# When the source icon is not displayed, you

can display it by touching the screen.

2 Touch the screen to display the touch

panel keys.

3 Touch BAND to select a band.

Touch BAND repeatedly until the desired band

is displayed, TV1 or TV2.

4 To perform manual tuning, briefly

touch c or d.

# You can also perform manual tuning by press-

ing o or p.

5 To perform seek tuning, keep touching

c or d for about one second and release.

The tuner will scan the channels until a broad-

cast strong enough for good reception is

found.

# You can cancel seek tuning by briefly touching

either c or d.

# If you keep touching c or d you can skip

broadcasting channels. Seek tuning starts as

soon as you release the keys.

# You can also perform seek tuning by pressing

and holding o or p.

Note

If you do not use the touch panel keys within 30

seconds, they will be hidden automatically.

Storing and recalling broadcast

stations

If you touch any of the preset tuning keys P01

to P12 you can easily store up to 12 broadcast

stations for later recall with the touch of a key.

! Up to 24 stations, 12 for each of two TV

bands, can be stored in memory.

1 Touch LIST to display the preset list.

# When the touch panel keys are not displayed,

you can display them by touching the screen.

2 When you find a station that you want

to store in memory, keep touching one of

preset tuning keys P01 to P12 until the

beep sounds.

The next time you touch the same preset tun-

ing key the station is recalled from memory.

# To switch between P01 to P06 and P07 to P12,

touch PREV or NEXT.

3 Touch ESC to return to the ordinary dis-

play.

Available accessori es

Section

Available accessories

Note

You can also use a and b to recall stations as-

signed to preset tuning keys P01 to P12.

Introduction of advanced

operations

1 Touch A.MENU and then touch

FUNCTION MENU to display the function

names.

The function names are displayed and oper-

able ones are highlighted.

2 Touch ESC to return to the TV picture.

# To return to the previous display, touch BACK.

Storing the strongest broadcast

stations sequentially

% Touch BSSM on the function menu to

turn BSSM on.

BSSM begins to flash. While BSSM is flashing

the 12 strongest broadcast stations will be

stored in order from the lowest channel up.

When finished, BSSM stops flashing.

# To cancel the storage process, touch BSSM

again.

Note

Storing broadcast stations with BSSM may re-

place broadcast stations you have saved using

P01 to P12.

Selecting the area group

1 Touch COUNTRY on the function menu.

2 Touch c or d to select the area group.

Touch c or d until the desired area group ap-

pears in the display.

COUNTRY1 (CCIR channel)—COUNTRY2

(Italy channel)—COUNTRY3 (U.K. channel)—

COUNTRY4 (OIRT channel)

Available accessori es

Section

Digital Signal Processor

Introduction of DSP adjustments

You can use this unit to control multi-channel

processor (e.g. DEQ-P6600), which is sold sepa-

rately.

! Some functions may differ depending on the

multi-channel processor connected to this

unit.

Important

When a multi-channel processor and an optional

DVD player are connected to this unit, be sure to

use an optical cable (e.g., CD-AD600).

1 DSP display

Shows the DSP function names.

By carrying out the following settings/adjust-

ments in the order shown, you can create a fi-

nely-tuned sound field effortlessly.

1 Setting the speaker setting

2 Using the position selector

3 Auto TA and EQ (auto-time alignment and auto-

equalizing)

4 Adjusting the time alignment

5 Adjusting the speaker output levels using a

test tone

6 Selecting a cross-over frequency

7 Adjusting the speaker output levels

8 Adjusting 3-band parametric equalizer

1 Touch A.MENU and then touch

DSP MENU to display the DSP function

names.

The DSP function names are displayed and

operable ones are highlighted.

# To go to the next group of function names,

touch NEXT.

# To return to the previous group of function

names, touch PREV.

# When playing discs recorded with more than

96 kHz sampling frequency, you cannot use audio

functions. Also, equalizer curve setting,

POSITION, AUTO EQ and AUTO TA will be can-

celled.

# When playing discs recorded with more than

96 kHz sampling frequency, audio is outputted

from front speakers only.

# When selecting the FM as the source, you

cannot switch to SLA.

# When playing other than the DVD disc, you

cannot switch to DYNAMIC RANGE CONTROL.

# When neither FRONT-L nor FRONT-R is se-

lected in POSITION, you cannot switch to

TIME ALIGNNMENT.

# When both the center speaker and the rear

speaker are set to OFF in the speaker setting, you

cannot switch to DOLBY PRO LOGIC II.

2 Touch ESC to return to the ordinary dis-

play.

# To return to the previous display, touch BACK.

Using the sound field control

The SFC function creates the sensation of a

live performance.

Available accessori es

Section

Available accessories

! The acoustics of different performance en-

vironments are not the same and depend

on the extent and contour of space through

which sound waves move and on how

sounds bounce off the stage, walls, floors

and ceilings. At a live performance you

hear music in three stages: direct sound,

early reflections, and late reflections, or re-

verberations. Those factors are programed

into the SFC circuitry to recreate the acous-

tics of various performance settings.

1 On the normal display, touch EQ and

hold to switch to SFC function.

Touch EQ and hold until SFC appears in the

display.

# To switch to equalizer function, touch SFC and

hold.

2 Touch SFC to select the desired SFC

mode.

Touch SFC repeatedly to switch between the

following modes:

MUSICAL (musical)—DRAMA (drama)—

ACTION (action)—JAZZ (jazz)—HALL (hall)—

CLUB (club)—OFF (off)

Note

If the source is a 2-channel LPCM audio or a 2-

channel Dolby Digital audio and you select SFC

effects that are most applicable for 5.1-channel

audio (i.e., MUSICAL, DRAMA or ACTION), we

recommend turning Dolby Pro Logic II on. On the

other hand, when selecting SFC effects that are

intended for use with 2-channel audio (i.e., JAZZ,

HALL or CLUB), we recommend turning Dolby

Pro Logic II off.

Using the position selector

One way to assure a more natural sound is to

accurately position the stereo image, putting

you right in the center of the sound field. The

position selector function lets you automati-

cally adjust the speaker output levels and in-

serts a delay time to match the number and

position of occupied seats. When used in con-

junction with the SFC, the feature will make

the sound image more natural and offer a pa-

noramic sound that envelops you.

1 Touch POSITION on the DSP function

menu.

2 Touch c/d/a/b to select a listening po-

sition.

Touch one of these, c/d/a/b, to select a lis-

tening position as listed in the table.

Key Display Position

c FRONT-L Front seat left

d FRONT-R Front seat right

a FRONT Front seats

b ALL All seats

# To cancel the selected listening position,

touch the same key again.

Note

When you make adjustments to the listening po-

sition, the speaker outputs are automatically set

for appropriate levels. You can tailor the levels

more precisely referring to Adjusting the speaker

output levels using a test tone or Adjusting the

speaker output levels.

Using balance adjustment

You can change the fader/balance setting so

that it can provide you an ideal listening envir-

onment in all occupied seats.

1 Touch FADER/BALANCE on the DSP

function menu.

Available accessori es

Section

2 Touch a or b to adjust front/rear

speaker balance.

Each time you touch a or b it moves the

front/rear speaker balance towards the front or

the rear.

FRONT:25 to REAR:25 is displayed as the

front/rear speaker balance moves from front to

rear.

# FR: 0 is the proper setting when only two

speakers are used.

3 Touch c or d to adjust left/right speak-

er balance.

Each time you touch c or d it moves the left/

right speaker balance towards the left or the

right.

LEFT:25 to RIGHT:25 is displayed as the left/

right speaker balance moves from left to right.

Adjusting source levels

SLA (source level adjustment) lets you adjust

the volume level of each source to prevent ra-

dical changes in volume when switching be-

tween sources.

! Settings are based on the FM volume level,

which remains unchanged.

1 Compare the FM volume level with the

level of the source you wish to adjust.

2 Touch SLA on the DSP function menu.

3 Touch c or d to adjust the source vo-

lume.

Each time you touch c or d it increases or de-

creases the source volume.

+4 to –4 is displayed as the source volume is

increased or decreased.

Notes

! The MW/LW volume level can also be adjusted

with source level adjustments.

! Video CD, CD, compressed audio and DivX

are set to the same source level adjustment

volume automatically.

! DVD and the optional DVD player are set to

the same source level adjustment volume

automatically.

! External unit 1 and external unit 2 are set to

the same source level adjustment volume

automatically.

! AUX (auxiliary input) and AV (AV input) are set

to the same source level adjustment volume

automatically.

Using the dynamic range control

The dynamic range refers to the difference be-

tween the largest and softest sounds. The dy-

namic range control compresses this

difference so that you can clearly hear sounds

even at low volume levels.

! The dynamic range control is effective only

on Dolby Digital sounds.

! When playing other than the DVD disc, you

cannot switch to

DYNAMIC RANGE CONTROL.

1 Touch DYNAMIC RANGE CONTROL on

the DSP function menu.

2 Touch d to turn the dynamic range con-

trol on.

# To turn dynamic range control off, touch c.

Using the down-mix function

The down-mix function allows you to play back

multi-channel audio in 2 channels.

1 Touch DOWN MIX on the DSP function

menu.

Available accessori es

Section

Available accessories

2 Touch c or d to select the desired level.

! Lo/Ro – Stereo mix the original audio that

do not contain channel modes such as sur-

round components.

! Lt/Rt – Down mix so that the surround

components can be restored (decoded).

Using the direct control

You can override audio settings to check for ef-

fectiveness of your audio settings.

! All audio functions are locked out when the

direct control is on except VOLUME/ATT

and DOLBY PRO LOGIC II.

1 Touch DIGITAL DIRECT on the DSP func-

tion menu.

2 Touch d to turn the direct control on.

# To turn direct control off, touch c.

Using the Dolby Pro Logic II

Dolby Pro Logic II creates five full-bandwidth

output channels from two-channel sources to

achieve high-purity matrix surround.

! Dolby Pro Logic II supports up to 48kHz

sampling rate stereo source and has no ef-

fect on other types of source.

! When both the center speaker and the rear

speaker are set to OFF in the speaker set-

ting, you cannot switch to

DOLBY PRO LOGIC II.

1 Touch NEXT on the DSP function menu.

2 Touch DOLBY PRO LOGIC II.

3 Touch any of the following touch panel

keys to select the desired mode.

! MOVIE – The Movie mode suitable for

movie playback

! MUSIC – The Music mode suitable for

music playback

! MATRIX – The Matrix mode for when FM

radio reception is weak

! OFF – Turn Dolby Pro Logic II off

! MUSIC ADJUST – Adjust the Music mode

# You can operate MUSIC ADJUST only when

MUSIC has been selected.

Adjusting the Music mode

You can adjust the Music mode with the fol-

lowing three controls.

! Panorama (PANORAMA) extends the front

stereo image to include the surround

speakers for an exciting “wraparound” ef-

fect.

! Dimension (DIMENSION) allows you to

gradually adjust the sound field either to-

wards the front or the rear.

! Center Width Control (CENTER WIDTH) al-

lows center-channel sounds to be posi-

tioned between the center speaker and the

left/right speakers. It improves the left-cen-

ter-right stage presentation for both the dri-

ver and the front passenger.

1 Touch NEXT on the DSP function menu.

2 Touch DOLBY PRO LOGIC II.

3 Touch MUSIC and then touch

MUSIC ADJUST.

# You can operate MUSIC ADJUST only when

MUSIC has been selected.

4 Touch a or b to select PANORAMA (pa-

norama).

Each time you touch a or b selects the item

in the following order:

PANORAMA (panorama)—DIMENSION (di-

mension)—CENTER WIDTH (center width)

5 Touch d to turn the panorama control

on.

# To turn the panorama control off, touch c.

Available accessori es

Section

6 Touch b to select DIMENSION and then

touch c or d to adjust front/surround

speaker balance.

Each time you touch c or d it moves the

sound towards the front or the surrounds.

+3 to –3 is displayed as the front/surround

speaker balance moves from front to sur-

rounds.

7 Touch b to select CENTER WIDTH and

then touch c or d to adjust the center

image.

Each time you touch c or d it gradually

spreads the center channel sound into the

front left and right speakers over a range 0 to

3 is the default and it’s recommended for

most recordings. 0 places all center sound in

the center speaker. 7 places all center sound

equally in the left/right speakers.

Setting the speaker setting

You need to make with/without (or yes/no) and

size (bass reproducing capacity) selection/ad-

justments depending on the installed speak-

ers. The size needs to be set to LARGE (large)

if the speaker is capable of reproducing

sounds of about 100 Hz or below. Otherwise

select SMALL (small).

! Low frequency range is not output if the

subwoofer is set to OFF and the front and

rear speakers set to SMALL or OFF.

! It is imperative that non-installed speakers

be set to OFF.

! Set the front or rear speaker to LARGE if

the speaker is capable of reproducing bass

content, or if no subwoofer is installed.

1 Touch NEXT on the DSP function menu.

2 Touch SPEAKER SETTING.

3 Touch a or b to select the speaker to

be adjusted.

Each time you touch a or b selects the speak-

er in the following order:

FRONT (front speakers)—CENTER (center

speaker)—REAR (rear speakers)—

SUB WOOFER (subwoofer)—PHASE (subwoo-

fer setting)

# You can switch to PHASE only when the sub-

woofer has been set to ON.

4 Touch c or d to select the correct size

for the selected speaker.

Each time you touch c or d selects the size in

the following order:

OFF (off)—SMALL (small)—LARGE (large)

# You cannot select OFF, when FRONT (front

speakers) have been selected.

# You can select ON or OFF, when

SUB WOOFER (subwoofer) has been selected.

# You can switch REVERSE (reverse phase) or

NORMAL (normal phase), when PHASE (subwoo-

fer setting) has been selected.

Correcting the subwoofer’s phase

If trying to boost the bass output of the sub-

woofer doesn’t do much or rather makes you

feel that the bass gets more murky, this may

indicate that the subwoofer’s output and bass

content you hear over other speakers cancel

each other out. To remove this problem, try

changing the phase setting for the subwoofer.

1 Touch NEXT on the DSP function menu.

2 Touch SPEAKER SETTING.

3 Touch a or b to select SUB WOOFER

(subwoofer).

Each time you touch a or b selects the speak-

er in the following order:

Available accessori es

Section

Available accessories

FRONT (front speakers)—CENTER (center

speaker)—REAR (rear speakers)—

SUB WOOFER (subwoofer)—PHASE (subwoo-

fer setting)

4 Touch d to turn subwoofer output on.

# To turn subwoofer output off, touch c.

5 Touch b and then touch c or d to se-

lect the phase of subwoofer output.

Touch d to select normal phase and

NORMAL appears in the display. Touch c to

select reverse phase and REVERSE appears in

the display.

Note

When playing a 2-channel mono source with Pro

Logic turned on, there may be occasions when

the following will occur:

! No audio is outputted if the center speaker

setting is SMALL or LARGE and no center

speaker is installed.

! Audio is heard only over the center speaker if

installed and the center speaker setting is

SMALL or LARGE.

Adjusting the speaker output

levels

Speaker level can be adjusted finely by listen-

ing to an audio output. First, use test tone to

adjust the approximate speaker level, and then

use this function to adjust finely.

1 Touch NEXT on the DSP function menu.

2 Touch SPEAKER LEVEL.

3 Touch a or b to select the speaker to

be adjusted.

Each time you touch a or b selects the speak-

er in the following order:

FRONT L (front speaker left)—CENTER (center

speaker)—FRONT R (front speaker right)—

REAR R (rear speaker right)—REAR L (rear

speaker left)—SUB WOOFER (subwoofer)

# You cannot select speakers whose size is set

at OFF. (Refer to Setting the speaker setting on

the previous page.)

4 Touch c or d to adjust the speaker out-

put level.

Each time you touch c or d increases or de-

creases the speaker output level. +10 to –10 is

displayed as the level is increased or de-

creased.

Note

To adjust the speaker output levels in this mode is

the same as making the speaker output levels at

TEST TONE. Both provide the same results.

Selecting a cross-over frequency

You can select a frequency, under which

sounds are reproduced through the subwoo-

fer. If the installed speakers include one whose

size has been set to SMALL, you can select a

frequency, under which sounds are repro-

duced through a LARGE speaker or subwoo-

fer.

1 Touch NEXT on the DSP function menu.

2 Touch CROSS OVER.

3 Touch a or b to select the speaker to

be adjusted.

Each time you touch a or b selects the speak-

er in the following order:

FRONT (front speakers)—CENTER (center

speaker)—REAR (rear speakers)—

SUB WOOFER (subwoofer)

Available accessori es

Section

4 Touch c or d to select cross-over fre-

quency.

Each time you touch c or d selects cross-over

frequencies in the following order:

63—80—100—125—160—200 (Hz)

Note

Selecting a cross-over frequency is to set a cross-

over frequency of the subwoofer’s L.P.F. (low-pass

filter) and that of the SMALL speaker H.P.F. (high-

pass filter). The cross-over frequency setting has

no effect if the subwoofer is set to OFF and other

speakers are set to LARGE or OFF.

Adjusting the speaker output

levels using a test tone

This function allows you to easily get the over-

all balance right among the speakers.

1 Touch NEXT on the DSP function menu.

2 Touch TEST TONE.

3 Touch START to start the test tone out-

put.

The test tone is outputted. It rotates from

speaker to speaker in the following sequence

at intervals of about two seconds. The current

settings for the speaker over which you hear

the test tone are shown in the display.

FRONT L (front speaker left)—CENTER (center

speaker)—FRONT R (front speaker right)—

REAR R (rear speaker right)—REAR L (rear

speaker left)—SUB WOOFER (subwoofer)

Check each speaker output level. If no adjust-

ments are needed, perform step 5 to stop the

test tone.

# The settings do not appear for speakers

whose size is set OFF. (Refer to Setting the speak-

er setting on page 77.)

4 Touch c or d to adjust the speaker out-

put level.

Each time you touch c or d increases or de-

creases the speaker output level. +10 to –10 is

displayed as the level is increased or de-

creased.

# The test tone rotates to the next speaker after

about two seconds from the last operation.

5 Touch STOP to stop the test tone out-

put.

Notes

! If needed, select speakers and adjust their ‘ab-

solute’ output levels. (Refer to Adjusting the

speaker output levels on the previous page.)

! To adjust the speaker output levels in this

mode is the same as making the speaker out-

put levels at SPEAKER LEVEL. Both provide

the same results.

Using the time alignment

The time alignment lets you adjust the dis-

tance between each speaker and the listening

position.

1 Touch NEXT on the DSP function menu.

2 Touch TIME ALIGNNMENT.

3 Touch any of the following touch panel

keys to select the time alignment.

! INITIAL – Initial time alignment (factory set-

ting)

! AUTO TA – Time alignment created by auto

TA and EQ. (Refer to Auto TA and EQ (auto-

time alignment and auto-equalizing) on

page 82.)

! CUSTOM – Adjusted time alignment that

you can create for yourself

! OFF – Turn the time alignment off

Available accessori es

Section

Available accessories

! ADJUSTMENT – Adjust the time alignment

as desired

# You cannot select AUTO TA if auto TA and EQ

has not been carried out.

# You cannot select ADJUSTMENT when

neither FRONT-L nor FRONT-R is selected in

POSITION.

Adjusting the time alignment

You can adjust the distance between each

speaker and the selected position.

! An adjusted time alignment is memorized

in CUSTOM.

1 Touch NEXT on the DSP function menu.

2 Touch TIME ALIGNNMENT and then

touch ADJUSTMENT.

# You cannot select ADJUSTMENT when

neither FRONT-L nor FRONT-R is selected in

POSITION.

3 Touch a or b to select the speaker to

be adjusted.

Each time you touch a or b selects the speak-

er in the following order:

FRONT L (front speaker left)—CENTER (center

speaker)—FRONT R (front speaker right)—

REAR R (rear speaker right)—REAR L (rear

speaker left)—SUB WOOFER (subwoofer)

# You cannot select speakers whose size is set

at OFF. (Refer to Setting the speaker setting on

page 77.)

4 Touch c or d to adjust the distance be-

tween the selected speaker and the listen-

ing position.

Each time you touch c or d increases or de-

creases the distance. 0.0cm to 500.0cm is dis-

played as the distance is increased or

decreased.

Using the equalizer

The equalizer lets you adjust the equalization

to match car interior acoustic characteristics

as desired.

Recalling equalizer curves

There are seven stored equalizer curves which

you can easily recall at any time. Here is a list

of the equalizer curves:

Display Equalizer curve

POWERFUL Powerful

NATURAL Natural

VOCAL Vocal

FLAT Flat

CUSTOM1 Custom 1

CUSTOM2 Custom 2

SUPER BASS Super bass

! CUSTOM1 and CUSTOM2 are adjusted

equalizer curves.

! When FLAT is selected no supplement or

correction is made to the sound. This is

useful to check the effect of the equalizer

curves by switching alternatively between

FLAT and a set equalizer curve.

% On the normal display, touch EQ to se-

lect the equalizer.

Touch EQ repeatedly to switch between the fol-

lowing equalizers:

POWERFUL—NATURAL—VOCAL—FLAT—

CUSTOM1—CUSTOM2—SUPER BASS

# If SFC instead of EQ appears on the normal

display, touch SFC and hold to switch to equalizer

function. About SFC, refer to Using the sound

field control on page 73.

Available accessori es

Section

Adjusting 3-band parametric equalizer

For CUSTOM1 and CUSTOM2 equalizer

curves, you can adjust the front, rear and cen-

ter equalizer curves separately by selecting a

center frequency, an equalizer level and a Q

factor for each band.

! A separate CUSTOM1 curve can be cre-

ated for each source.

! A CUSTOM2 curve can be created com-

mon to all sources.

! The center speaker largely determines the

sound image and getting the balance right

isn’t easy. We recommend reproducing a 2-

ch. audio (a CD for example) and getting

the balance right among the speakers ex-

cept for the center, and then reproducing a

5.1-ch. audio (Dolby Digital or DTS) and ad-

justing the center speaker output to the

balance you have already got among the

other speakers.

1 Touch NEXT twice on the DSP function

menu.

2 Touch PARAMETRIC EQ.

3 Touch a or b to select the desired item.

Each time you touch a or b selects the item

in the following order:

EQ (equalizer)—SP-SELECT (speakers)—

BAND (bands)—FREQUENCY (center fre-

quency)—LEVEL (equalizer level)—

Q. FACTOR (Q factor)

4 Touch d to select the equalizer.

Touch d repeatedly to switch between the fol-

lowing equalizers:

POWERFUL—NATURAL—VOCAL—FLAT—

CUSTOM1—CUSTOM2—SUPER BASS

5 Touch b and then touch c or d to se-

lect the speaker to be adjusted.

Touch c or d until the desired speaker ap-

pears in the display.

REAR (rear speakers)—CENTER (center speak-

er)—FRONT (front speakers)

# You cannot select speakers whose size is set

at OFF. (Refer to Setting the speaker setting on

page 77.)

6 Touch b and then touch c or d to se-

lect the equalizer band to be adjusted.

Each time you touch c or d selects equalizer

bands in the following order:

LOW (low)—MID (mid)—HIGH (high)

7 Touch b and then touch c or d to se-

lect the center frequency of selected band.

Touch c or d until the desired frequency ap-

pears in the display.

40Hz—50Hz—63Hz—80Hz—100Hz—125Hz

—160Hz—200Hz—250Hz—315Hz—400Hz—

500Hz—630Hz—800Hz—1kHz—1.25kHz—

1.6kHz—2kHz—2.5kHz—3.15kHz—4kHz—

5kHz—6.3kHz—8kHz—10kHz—12.5kHz

8 Touch b and then touch c or d to ad-

just the equalizer level.

Each time you touch c or d it increases or de-

creases the equalizer level. +12 to –12 is dis-

played as the level is increased or decreased.

9 Touch b and then touch c or d to se-

lect the desired Q factor.

Each time you touch c or d switches between

the following Q factor:

NARROW (narrow)—WIDE (wide)

# You can adjust parameters for each band of

the other speakers in the same way.

Note

You can select a center frequency for each band.

You can change the center frequency in 1/3-oc-

tave steps, but you cannot select frequencies that

have intervals shorter than 1 octave among the

center frequencies of the three bands.

Available accessori es

Section

Available accessories

Using the auto-equalizer

The auto-equalizer is the equalizer curve cre-

ated by auto TA and EQ (refer to Auto TA and

EQ (auto-time alignment and auto-equalizing)

on this page).

You can turn the auto-equalizer on or off.

1 Touch NEXT twice on the DSP function

menu.

2 Touch AUTO EQ.

# You cannot use this function if auto TA and

EQ has not been carried out.

3 Touch d to turn the auto-equalizer on.

# To turn auto-equalizer off, touch c.

Auto TA and EQ (auto-time

alignment and auto-equalizing)

The auto-time alignment is automatically ad-

justed for the distance between each speaker

and the listening position.

The auto-equalizer automatically measures

the car interior acoustic characteristics, and

then creates the auto-equalizer curve based

on that information.

WARNING

To prevent accidents, never carry out auto TA and

EQ while driving. When this function measures

the car interior acoustic characteristics to create

an auto-equalizer curve, a loud measurement

tone (noise) may be outputted from the speakers.

CAUTION

! Carrying out auto TA and EQ under the follow-

ing conditions may damage the speakers. Be

sure to check the conditions thoroughly be-

fore carrying out auto TA and EQ.

— When speakers are incorrectly connected.

(e.g., When a rear speaker is connected to

a subwoofer output.)

— When a speaker is connected to a power

amp delivering output higher than the

speaker’s maximum input power capabil-

ity.

! If the microphone is placed in an unsuitable

position the measurement tone may become

loud and measurement may take a long time,

resulting in a drain on battery power. Be sure

to place the microphone in the specified loca-

tion.

Before operating the auto TA and EQ

function

! Carry out auto TA and EQ in as quiet a

place as possible, with the car engine and

air conditioning switched off. Also cut

power to car phones or portable telephones

in the car, or remove them from the car be-

fore carrying out auto TA and EQ. Sounds

other than the measurement tone (sur-

rounding sounds, engine sound, tele-

phones ringing etc.) may prevent correct

measurement of the car interior acoustic

characteristics.

! Be sure to carr y out auto TA and EQ using

the supplied microphone. Using another

microphone may prevent measurement, or

result in incorrect measurement of the car

interior acoustic characteristics.

! When front speaker is not connected, auto

TA and EQ cannot be carried out.

! When this unit is connected to a power

amp with input level control, auto TA and

EQ may not be possible if you lower power

amp input level. Set the power amp’s input

level to the standard position.

Available accessori es

Section

! When this unit is connected to a power

amp with an LPF, turn off the LPF on the

power amp before carrying out auto TA and

EQ. In addition, the cut-off frequency for

built-in LPF of an active subwoofer should

be set to the highest frequency.

! The time alignment value calculated by

auto TA and EQ may differ from the actual

distance in the following circumstances.

However, the distance has been calculated

by computer to be the optimum delay to

give accurate results for the circum-

stances, so please continue to use this

value.

— When the reflected sound within a vehi-

cle is strong and delays occur.

— When delays occur for low sounds due

to the influence of the LPF on active

subwoofers or external amps.

! Auto TA and EQ changes the audio settings

as below:

— The fader/balance settings return to the

center position. (Refer to page 74.)

— The equalizer curve switches to FLAT.

(Refer to page 80.)

— It will be adjusted automatically to high

pass filter setting for front, center and

rear speaker.

! If you carry out auto TA and EQ when a pre-

vious setting of this already exists, the set-

ting will be replaced.

Carrying out auto TA and EQ

1 Stop the car in a place that is as quiet

as possible, close all doors, windows and

the sun roof, and then turn the engine off.

If the engine is left running, engine noise may

prevent correct auto TA and EQ.

2 Fix the supplied microphone in the cen-

ter of the headrest of the driver’s seat, fa-

cing forward, using the belt (sold

separately).

The auto TA and EQ may differ depending on

where you place the microphone. If desired,

place the microphone on the front passenger

seat to carry out auto TA and EQ.

3 Turn the ignition switch to ON or ACC.

If the car’s air conditioner or heater is turned

on, turn it off. Noise from the fan in the air

conditioner or heater may prevent correct auto

TA and EQ.

# Press SOURCE to turn the source on if this

unit is turned off.

4 Select the position for the seat on

which the microphone is placed.

Refer to Using the position selector on page

74.

# If no position is selected before you start auto

TA and EQ, FRONT-L is selected automatically.

5 Press SOURCE and hold until the unit

turns off.

6 Touch the screen to display the touch

panel keys.

7 Touch and hold EQ to enter the auto TA

and EQ measurement mode.

Available accessori es

Section

Available accessories

8 Plug the microphone into the micro-

phone input jack on the multi-channel pro-

cessor.

For details concerning operation, refer to the

multi-channel processor’s operation manual.

9 Touch START to start the auto TA and

EQ.

10 Get out of the car and close the door

within 10 seconds when the 10-second

count-down starts.

The measurement tone (noise) is outputted

from the speakers, and auto TA and EQ be-

gins.

# When all speakers are connected, auto TA

and EQ is completed in about nine minutes.

# To stop auto TA and EQ, touch STOP.

# To cancel auto TA and EQ part way through,

touch BACK or ESC.

11 When auto TA and EQ is completed,

Complete is displayed.

When correct measurement of car interior

acoustic characteristics is not possible, an

error message is displayed. (Refer to Under-

standing auto TA and EQ error messages on

page 88.)

12 Touch ESC to cancel the auto TA and EQ

mode.

13 Store the microphone carefully in the

glove compartment.

Store the microphone carefully in the glove

compartment or any other safe place. If the

microphone is subjected to direct sunlight for

an extended period, high temperatures may

cause distortion, color change or mal-

function.

Available accessori es

Section

Troubleshooting

Common

Symptom Cause Action (See)

Power doesn’t turn on.

The unit doesn’t operate.

Leads and connectors are incor-

rectly connected.

Confirm once more that all connections are

correct.

The fuse is blown. Rectify the reason for the fuse blowing, then

replace the fuse. Be very sure to install the

correct fuse with the same rating.

Noise and other factors are causing

the built-in microprocessor to oper-

ate incorrectly.

Press RESET. (Page 13)

Operation with the remote con-

trol isn’t possible.

The unit does not operate cor-

rectly even when the appropriate

remote control buttons are

pressed.

The remote control operation mode

is incorrect.

Switch to the correct remote control mode.

The remote control code is incor-

rect.

Make sure the remote control selection

switch setting and code type setting are the

same.

Battery power is low. Load new battery.

Some operations are prohibited

with certain discs.

Check by using another disc.

Playback is not possible. The disc is dirty. Clean disc. (Page 90)

The loaded disc is a type this unit

cannot play.

Check what type the disc is.

Non compatible video system disc

is loaded.

Change to a disc compatible to your video

system.

No sounds are heard.

The volume level will not rise.

Cables are not connected correctly. Connect the cables correctly.

The unit is performing still, slow mo-

tion or frame-by-frame playback.

There is no sound during still, slow motion or

frame-by-frame playback.

There is no picture. The parking brake cord is not con-

nected.

Connect a parking brake cord, and apply the

parking brake.

The parking brake is not applied. Connect a parking brake cord, and apply the

parking brake.

The icon

is displayed, and op-

eration is not possible.

The operation is prohibited for the

disc.

This operation is not possible.

The operation is not compatible

with the disc’s organization.

This operation is not possible.

The picture stops (pauses) and

the unit cannot be operated.

Reading of data has become impos-

sible during playback .

After stopping playback once, start playback

once more.

There is no sound.

Volume level is low.

The volume level is low. Adjust the volume level.

The attenuator is on. Turn the attenuator off.

There is audio and video skip-

ping.

The unit is not firmly secured. Secure the unit firmly.

The picture is stretched, the as-

pect is incorrect.

The aspect setting is incorrect for

the display.

Select the appropriate setting for your display.

(Page 42)

Additional Information

Appendix

Additional Information

Symptom Cause Action (See)

When the ignition switch is

turned ON (or turned to ACC),

the motor sounds.

The unit is confirming whether a

disc is loaded or not.

This is a normal operation.

Nothing is displayed.

The touch panel keys cannot be

used.

The rear view camera is not con-

nected.

CAMERA POLARITY is at incorrect

setting.

Connect a rear view camera.

Press and hold DISPLAY to return to the

source display and then select the correct set-

ting for CAMERA POLARITY. (Page 51)

Problems during DVD playback

Symptom Cause Action (See)

Playback is not possible. The loaded disc has a different re-

gion number from this unit.

Replace the disc with one featuring the same

region number as this unit. (Page 8, Page 98)

A parental lock message is dis-

played and playback is not pos-

sible.

Parental lock is on. Turn parental lock off or change the level.

(Page 42)

Parental lock cannot be can-

celed.

The code number is incorrect. Input the correct code number. (Page 42)

You have forgotten your code num-

ber.

Touch C 10 times to cancel the code number.

(Page 43)

Dialog language (and subtitle

language) cannot be switched.

The DVD playing does not feature

multiple language recordings.

You cannot switch among multiple languages

if they are not recorded on the disc.

You can only switch between items

indicated in the disc menu.

Switch using the disc menu.

No subtitles are displayed. The DVD playing does not feature

subtitles.

Subtitles are not displayed if they are not re-

corded on the disc.

You can only switch between items

indicated in the disc menu.

Switch using the disc menu.

Playback is not with the audio

language and subtitle language

settings selected in DVD SETUP.

The DVD playing does not feature

dialog or subtitles in the language

selected in DVD SETUP.

Switching to a selected language is not possi-

ble if the language selected in DVD SETUP is

not recorded on the disc.

Switching the viewing angle is

not possible.

The DVD playing does not feature

scenes shot from multiple angles.

You cannot switch between multiple angles if

the DVD does not feature scenes recorded

from multiple angles.

You are trying to switch to multiple

angle viewing of a scene that is not

recorded from multiple angles.

Switch between multiple angles when watch-

ing scenes recorded from multiple angles.

The picture is extremely unclear/

distorted and dark during play-

back.

The disc features a signal to prohibit

copying. (Some discs may have

this.)

Since this unit is compatible with the copy

guard analog copy protect system, when play-

ing a disc that has a signal prohibiting copy-

ing, the picture may suffer from horizontal

stripes or other imperfections when viewed

on some displays. This does not mean this

unit is malfunctioning.

Additional Information

Appendix

Problems during Video CD playback

Symptom Cause Action

The PBC (playback control)

menu display cannot be called

up.

The Video CD playing does not fea-

ture PBC.

This operation is not possible with Video CDs

not featuring PBC.

Repeat play and track/time

search are not possible.

The Video CD playing features PBC. This operation is not pos sible with Video CDs

featuring PBC.

Problems during iPod playback

Symptom Cause Action

iPod doesn’t operate correctly. Cables are incorrectly connected . Disconnect the cable from iPod. Once iPod

main menu is displayed, connect the cable

again.

Reset the iPod.

The iPod version is old. Update the iPod version.

Problems during multi-channel processor connection

Symptom Cause Action (See)

No sounds are heard.

The volume level will not rise.

Optical cables are not connected

correctly.

Connect the cables correctly.

Even if multi-channel audio is

selected, 2-channel audio is out-

put.

Digital output setting is set to Line-

ar PCM.

Normally, set the digital output setting to

STREAM. (Page 44)

Error messages

When you contact your dealer or your nearest Pioneer Service Center, be sure to record the error

message.

Built-in DVD player

Message Cause Action

DIFFERENT REGION DISC (R

ERROR)

The disc does not have the same re-

gion number as this unit

Replace the DVD video with one bearing the

correct region number.

ERROR-02-XX Dirty disc Clean disc.

Scratched disc Replace disc.

The disc is loaded upside down Check that the disc is loaded correctly.

Electrical or mechanical Press RESET.

Additional Information

Appendix

Additional Information

Message Cause Action

NON-PLAYABLE DISC (NON-

PLAY)

This type of disc cannot be played

by this unit

Replace the disc with one this unit can play.

The inserted disc does not contain

any files that can be played back

Replace disc.

PROTECT All the files on the inserted disc are

secured by DRM

Replace disc.

SKIPPED The inserted disc contains WMA

files that are protected by DRM

Replace disc.

TEMP The temperature of this unit is out-

side the normal operating range

Wait until the unit’s temperature returns to

within normal operating limits.

iPod

Message Cause Action

ERROR-11 Communication failure Disconnect the cable from iPod. Once iPod

main menu is displayed, connect the cable

again.

Reset the iPod.

ERROR-21 Old version of iPod Update the iPod version.

ERROR-30 iPod failure Reset the iPod.

No Songs No songs Transfer the songs to iPod.

STOP No songs in the current list Select a list that contains the songs.

iPod is not charged but operates

correctly

Check if the connection cable for iPod

shorted out (e.g., not caught in metal ob-

jects). After checking, switch the ignition key

or disconnect the iPod and connect again.

Understanding auto TA and EQ error messages

When correct measurement of car interior acoustic characteristics is not possible using the auto

TA and EQ, an error message may appear on the display. If an error message appears, refer to the

table below to see what the problem is and the suggested method of correcting the problem. After

checking, try again.

Message Cause Action

Error. Please check MIC. Microphone is not connected. Plug the supplied microphone securely into

the jack.

Additional Information

Appendix

Message Cause Action

Error. Please check front SP.,

Error. Please check FL SP.,

Error. Please check FR SP.,

Error. Please check center SP.,

Error. Please check rear SP.,

Error. Please check RL SP.,

Error. Please check RR SP.,

Error. Please check subwoofer

The microphone cannot pick up the

measuring tone of a speaker.

! Confirm that the speakers are connected

correctly.

! Correct the input level setting of the power

amp connected to the speakers.

! Set the microphone correctly.

Error. Please check noise. The surrounding noise level is too

high.

! Stop your car in a place that is as quiet as

possible, and switch off the engine, air condi-

tioner or heater.

! Set the microphone correctly.

Additional Information

Appendix

Additional Information

Handling guideline of discs

and player

! Use only conventional, fully circular discs.

Do not use shaped discs.

! Use 12-cm or 8-cm disc. Do not use an

adapter when playing 8-cm discs.

! Do not insert anything other than a disc

into the disc loading slot. Discs which can

be played back are listed on Playable discs

on page 8.

! Do not use cracked, chipped, warped, or

otherwise damaged discs as they may da-

mage the player.

! Do not touch the recorded surface of the

discs.

! Store discs in their cases when not in use.

! Avoid leaving discs in excessively hot envir-

onments including under direct sunlight.

! Do not attach labels, write on or apply che-

micals to the surface of the discs.

! To clean a disc, wipe the disc with a soft

cloth outward from the center.

! Condensation may temporarily impair the

player’s performance. Leave it to adjust to

the warmer temperature for about one

hour. Also, wipe any dump discs with a soft

cloth.

! Playback of discs may not be possible be-

cause of disc characteristics, disc format,

recorded application, playback environ-

ment, storage conditions and so on.

! Road shocks may interrupt disc playback.

! Read the precautions with discs before

using them.

DVD discs

! With some DVD video discs, it may not be

possible to use certain functions.

! It may not be possible to play back some

DVD video discs.

! It is not possible to play back DVD-ROM/

DVD-RAM discs.

DVD-R/DVD-RW discs

! Unfinalized DVD-R/-RW discs which have

been recorded with the Video format (video

mode) cannot be played back.

! DVD-R/-RW discs which have been re-

corded with the Video Recording format

(VR mode) can be played back. However,

unfinalized disc may not be played back.

Unplayable disc should be finalized. In ad-

dition, finalized DVD-R DL (Dual Layer) disc

cannot be recorded/edited.

! DVD-R DL (Dual Layer) discs which have

been recorded with the Video Recording

format (VR mode) can be played back.

However, this unit is not compatible with

Layer Jump recording mode.

! For more information about recording

mode, please contact manufacture of DVD

recorder or application.

! The following logo indicates that this unit is

compatible with DVD-RW discs which have

been recorded with the Video Recording

format (VR mode).

Additional Information

Appendix

AVCHD recorded discs

! This unit is not compatible with discs re-

corded in AVCHD (Advanced Video Codec

High Definition) format. Do not insert

AVCHD discs. If inserted, the disc may not

be ejected.

CD-R/CD-RW discs

! When CD-R/CD-RW discs are used, play-

back is possible only for discs which have

been finalized.

! It may not be possible to play back CD-R/

CD-RW discs recorded on a music CD re-

corder or a personal computer because of

disc characteristics, scratches or dirt on

the disc, or dirt, condensation, etc., on the

lens of this unit.

! Playback of discs recorded on a personal

computer may not be possible, depending

on the application settings and the environ-

ment. Please record with the correct for-

mat. (For details, contact the manufacturer

of the application.)

! Playback of CD-R/CD-RW discs may be-

come impossible in case of direct exposure

to sunlight, high temperatures, or the sto-

rage conditions in the vehicle.

! Titles and other text information recorded

on a CD-R/CD-RW disc may not be dis-

played by this unit (in the case of audio

data (CD-DA)).

! Read the precautions with CD-R/CD-RW

discs before using them.

Dual Discs

! Dual Discs are two-sided discs that have a

recordable CD for audio on one side and a

recordable DVD for video on the other.

! Playback of the DVD side is possible with

this unit. However, since the CD side of

Dual Discs is not physically compatible

with the general CD standard, it may not be

possible to play the CD side with this unit.

! Frequent loading and ejecting of a Dual

Disc may result in scratches on the disc.

Serious scratches can lead to playback pro-

blems on this unit. In some cases, a Dual

Disc may become stuck in the disc loading

slot and will not eject. To prevent this, we

recommend you refrain from using Dual

Disc with this unit.

! Please refer to the information from the

disc manufacturer for more detailed infor-

mation about Dual Discs.

Compressed audio files on

the disc

! Depending on the version of Windows

Media Player used to encode WMA files,

album names and other text information

may not be correctly displayed.

! There may be a slight delay when starting

playback of audio files encoded with image

data.

! ISO 9660 Level 1 and 2 compliant. Romeo

and Joliet file systems are both compatible

with this player.

! Multi-session playback is possible.

! Compressed audio files are not compatible

with packet write data transfer.

! Only 64 characters from the beginning can

be displayed as a file name (including the

extension such as .wma or .mp3) or a folder

name.

! Folder selection sequence or other opera-

tion may be altered depending on the en-

coding or writing software.

Additional Information

Appendix

Additional Information

! Regardless of the length of blank section

between the songs of original recording,

compressed audio discs will play with a

short pause between songs.

! File extensions such as .wma, .mp3 or .m4a

must be used properly.

Example of a hierarchy

: Folder

: Compressed audio file

l 1 L

l 2 L

l 3 L

l 4

! This unit assigns folder numbers. The user

cannot assign folder numbers.

! It is possible to play back up to 255 folders

on one disc.

Compressed audio compatibility

WMA

! Compatible format: WMA encoded by

Windows Media Player Ver. 7, 7.1, 8, 9 or 10

! Bit rate: 5 kbps to 320 kbps (CBR), VBR

! Sampling frequency: 8 kHz to 48 kHz

! Windows Media Audio 9 Professional, Loss-

less, Voice: No

MP3

! Bit rate: 8 kbps to 320 kbps (CBR), VBR

! Sampling frequency: 8 kHz to 48 kHz (em-

phasis: 8 kHz to 48 kHz)

! Compatible ID3 tag version: 1.0, 1.1, 2.2, 2.3

(ID3 tag Version 2.x is given priority than

Version 1.x.)

! M3u playlist: No

! MP3i (MP3 interactive), mp3 PRO: No

AAC

! Compatible format: AAC encoded by

iTunes

version 6.0.5 and earlier

! Bit rate: 8 kbps to 320 kbps (CBR)

! VBR: No

! Sampling frequency: 8 kHz to 44.1 kHz

! Apple Lossless: No

DivX video files

! Depending on the file information composi-

tion such as the number of audio stream,

there may be a slight delay in the start of

playback on discs.

! Some special operation may be prohibited

because of the composition of DivX files.

! DivX files downloaded only from DivX part-

ner site are guarantee of proper operation.

Unauthorized DivX file may not operate

properly.

! DRM rental file cannot be operated until

starting playing back.

! This unit corresponds to a DivX file display

up to 1 590 minutes 43 seconds. Also,

search operation beyond this time limit is

prohibited.

! If a file contains more than 4 GB, playback

is stopped on the way.

! DivX VOD file playback requires ID code of

this unit to DivX VOD provider. About ID

code, refer to Displaying your DivX

VOD re-

gistration code on page 44.

! File extensions such as .avi or .divx must be

used properly.

! For more details about DivX, visit the follow-

ing site:

http://www.divx.com/

Additional Information

Appendix

DivX compatibility

! Compatible format: DivX video format im-

plemented in relation to DivX standards

! DivX Ultra format: No

! DivX files without video data: No

! Compatible audio codec: MP2, MP3, Dolby

Digital

! LPCM: No

! Bit rate: 8 kbps to 320 kbps (CBR), VBR

! Sampling frequency: 8 kHz to 48 kHz

! Compatible external subtitle file extension:

.srt

About handling the iPod

CAUTION

! Pioneer accepts no responsibility for data lost

on the iPod even if that data is lost while

using this unit.

! Do not leave the iPod in direct sunlight for ex-

tended amounts of time. Extended exposure

to direct sunlight can result in iPod malfunc-

tion due to the resulting high temperature.

! Do not leave the iPod in any location with a

high temperature.

! Firmly secure the iPod when driving. Do not

let the iPod fall onto the floor, where it may be-

come jammed under the brake or accelerator

pedal.

For details, refer to the iPod’s manuals.

About iPod settings

! You cannot operate the iPod Equalizer on

the Pioneer products. We recommend that

you set the iPod Equalizer to off, before con-

necting the iPod to this unit.

! You cannot set Repeat to off on the iPod

when using this unit. Even if you set Repeat

to off on the iPod, Repeat is changed to All

automatically when connecting the iPod to

this unit.

Using the display correctly

CAUTION

! If liquid or foreign matter should get inside

this unit, turn off the power immediately and

consult your dealer or the nearest authorized

PIONEER Service Station. Do not use the unit

in this condition because doing so may result

in a fire, electric shock, or other failure.

! If you notice smoke, a strange noise or smell,

or any other abnormal signs from the display,

turn off the power immediately and consult

your dealer or the nearest authorized

PIONEER Service Station. Using this unit in

this condition may result in permanent da-

mage to the system.

! Do not disassemble or modify this unit, as

there are high-voltage components inside

which may cause an electric shock. Be sure

to consult your dealer or the nearest author-

ized PIONEER Service Station for internal in-

spection, adjustments or repairs.

Handling the display

! When the display is subjected to direct sun-

light for a long period of time, it will be-

come very hot resulting in possible

damage to the LCD screen. When not

using this unit, close the display and avoid

exposing it to direct sunlight.

! The display should be used within the tem-

perature ranges shown below.

Storage temperature range: -20 °C to +80

°C

At temperatures higher or lower than the

operating temperature range the display

may not operate normally.

Additional Information

Appendix

Additional Information

! The LCD screen of this unit is exposed in

order to increase its visibility within the ve-

hicle. Please do not press strongly on it as

this may damage it.

! Do not place anything on the display when

it is opened. Also, do not attempt to carr y

out angle adjustment, or open/close the

display by hand. Applying strong force to

the display may damage it.

! Do not push the LCD screen with much

force as this may scratch it.

! Be careful not to place anything between

the display and the main body when the

display is opening or closing. If an object

gets between the display and main body,

the display may stop working.

! Be careful of fingers, long hair, and loose

articles of clothing which could possibly

get caught between the display and the

main body and cause serious injury.

Liquid crystal display (LCD) screen

! If the display is near the vent of an air con-

ditioner when it is opened, make sure that

air from the air conditioner is not blowing

on it. Heat from the heater may damage

the LCD screen, and cool air from the cool-

er may cause moisture to form inside the

display resulting in possible damage. Also,

if the display is cooled down by the cooler,

the screen may become dark, or the life

span of the small fluorescent tube used in-

side the display may be shortened.

! Small black dots or white dots (bright dots)

may appear on the LCD screen. These are

due to the characteristics of the LCD

screen and do not indicate a problem with

the display.

! At low temperatures, the LCD screen may

be dark for a while after the power is turned

on.

! The LCD screen will be difficult to see if it is

exposed to direct sunlight.

! When using a portable phone, keep the an-

tenna of the portable phone away from the

display to prevent disruption of the video by

the appearance of spots, colored stripes,

etc.

Keeping the display in good

condition

! When removing dust from the screen or

cleaning the display, first turn the system

power off, then wipe with a soft dry cloth.

! When wiping the screen, take care not to

scratch the surface. Do not use harsh or

abrasive chemical cleaners.

Small fluorescent tube

! A small fluorescent tube is used inside the

display to illuminate the LCD screen.

— The fluorescent tube should last for ap-

proximately 10 000 hours, depending on

operating conditions. (Using the display

at low temperatures reduces the service

life of the fluorescent tube.)

— When the fluorescent tube reaches the

end of its useful life, the screen will be

dark and the image will no longer be

projected. If this happens, consult your

dealer or the nearest authorized

PIONEER Service Station.

Additional Information

Appendix

Language code chart for DVD

Language (code), input code Language (code), input code Language (code), input code

Japanese (ja), 1001 Guarani (gn), 0714 Pashto, Pushto (ps), 1619

English (en), 0514 Gujarati (gu), 0721 Quechua (qu), 1721

French (fr), 0618 Hausa (ha), 0801 Rhaeto-Romance (rm), 1813

Spanish (es), 0519 Hindi (hi), 0809 Kirundi (rn), 1814

German (de), 0405 Croatian (hr), 0818 Romanian (ro), 1815

Italian (it), 0920 Hungarian (hu), 0821 Kinyarwanda (rw), 1823

Chinese (zh), 2608 Armenian (hy), 0825 Sanskrit (sa), 1901

Dutch (nl), 1412 Interlingua (ia), 0901 Sindhi (sd), 1904

Portuguese (pt), 1620 Interlingue (ie), 0905 Sangho (sg), 1907

Swedish (sv), 1922 Inupiak (ik), 0911 Serbo-Croatian (sh), 1908

Russian (ru), 1821 Indonesian (in), 0914 Sinhalese (si), 1909

Korean (ko), 1115 Icelandic (is), 0919 Slovak (sk), 1911

Greek (el), 0512 Hebrew (iw), 0923 Slovenian (sl), 1912

Afar (aa), 0101 Yiddish (ji), 1009 Samoan (sm), 1913

Abkhazian (ab), 0102 Javanese (jw), 1023 Shona (sn), 1914

Afrikaans (af), 0106 Georgian (ka), 1101 Somali (so), 1915

Amharic (am), 0113 Kazakh (kk), 1111 Albanian (sq), 1917

Arabic (ar), 0118 Greenlandic (kl), 1112 Serbian (sr), 1918

Assamese (as), 0119 Cambodian (km), 1113 Siswati (ss), 1919

Aymara (ay), 0125 Kannada (kn), 1114 Sesotho (st), 1920

Azerbaijani (az), 0126 Kashmiri (ks), 1119 Sundanese (su), 1921

Bashkir (ba), 0201 Kurdish (ku), 1121 Swahili (sw), 1923

Byelorussian (be), 0205 Kirghiz (ky), 1125 Tamil (ta), 2001

Bulgarian (bg), 0207 Latin (la), 1201 Telugu (te), 2005

Bihari (bh), 0208 Lingala (ln), 1214 Tajik (tg), 2007

Bislama (bi), 0209 Laothian (lo), 1215 Thai (th), 2008

Bengali (bn), 0214 Lithuanian (lt), 1220 Tigrinya (ti), 2009

Tibetan (bo), 0215 Latvian (lv), 1222 Turkmen (tk), 2011

Breton (br), 0218 Malagasy (mg), 1307 Tagalog (tl), 2012

Catalan (ca), 0301 Maori (mi), 1309 Setswana (tn), 2014

Corsican (co), 0315 Macedonian (mk), 1311 Tonga (to), 2015

Czech (cs), 0319 Malayalam (ml), 1312 Turkish (tr), 2018

Welsh (cy), 0325 Mongolian (mn), 1314 Tsonga (ts), 2019

Danish (da), 0401 Moldavian (mo), 1315 Tatar (tt), 2020

Bhutani (dz), 0426 Marathi (mr), 1318 Twi (tw), 2023

Esperanto (eo), 0515 Malay (ms), 1319 Ukrainian (uk), 2111

Estonian (et), 0520 Maltese (mt), 1320 Urdu (ur), 2118

Basque (eu), 0521 Burmese (my), 1325 Uzbek (uz), 2126

Persian (fa), 0601 Nauru (na), 1401 Vietnamese (vi), 2209

Finnish (fi), 0609 Nepali (ne), 1405 Volapük (vo), 2215

Fiji (fj), 0610 Norwegian (no), 1415 Wolof (wo), 2315

Faroese (fo), 0615 Occitan (oc), 1503 Xhosa (xh), 2408

Frisian (fy), 0625 Oromo (om), 1513 Yoruba (yo), 2515

Irish (ga), 0701 Oriya (or), 1518 Zulu (zu), 2621

Scots-Gaelic (gd), 0704 Panjabi (pa), 1601

Galician (gl), 0712 Polish (pl), 1612

Additional Information

Appendix

Additional Information

Terms

AAC

AAC is short for Advanced Audio Coding and

refers to an audio compression technology

standard used with MPEG 2 and MPEG 4.

Aspect ratio

This is the width-to-height ratio of a TV screen.

A regular display has an aspect ratio of 4:3.

Wide screen displays have an aspect ratio of

16:9, providing a bigger picture for exceptional

presence and atmosphere.

Bit rate

This expresses data volume per second, or bps

(bits per second) units. The higher the rate,

the more information is available to reproduce

the sound. Using the same encoding method

(such as MP3), the higher the rate, the better

the sound.

Chapter

DVD titles are in turn divided into chapters

which are numbered in the same way as the

chapters of a book. With DVD video discs fea-

turing chapters, you can quickly find a desired

scene with chapter search.

DivX

DivX is a popular media technology created by

DivX, Inc. DivX media files contain highly com-

pressed video with high visual quality that

maintains a relatively small file size. DivX files

can also include advanced media features like

menus, subtitles, and alternate audio tracks.

Many DivX media files are available for down-

load online, and you can create your own

using your personal content and easy-to-use

tools from DivX.com.

DivX Certified

DivX Certified products are officially tested by

the creators of DivX and guaranteed to play all

versions of DivX video, including DivX 6.

Dolby Digital

Dolby Digital provides multi-channel audio

from up to 5.1 independent channels. This is

the same as the Dolby Digital surround sound

system used in theaters.

Dolby Pro Logic II

Dolby Pro Logic II can create five full-band-

width output channels from two-channel

sources. This new technology enables a dis-

crete 5-channel playback with 2 front chan-

nels, 1 center channel, and 2 rear channels. A

music mode is also available for 2-channel

sources in addition to the movie mode.

DTS

This stands for Digital Theater Systems. DTS is

a surround system delivering multi-channel

audio from up to 6 independent channels.

Dynamic range control

Dolby Digital has a function for compressing

the difference between the loudest and softest

sounds: Dynamic range control. This control

ensures sounds with an increased dynamic

range are heard clearly even at low volume le-

vels.

ID3 tag

This is a method of embedding track-related

information in an MP3 file. This embedded in-

formation can include the track title, the ar-

tist’s name, the album title, the music genre,

the year of production, comments and other

data. The contents can be freely edited using

software with ID3 Tag editing functions.

Although the tags are restricted as to the num-

ber of characters, the information can be

viewed when the track is played back.

ISO9660 format

This is the international standard for the for-

mat logic of CD-ROM folders and files. For the

ISO9660 format, there are regulations for the

following two levels.

Additional Information

Appendix

Level 1:

The file name is in 8.3 format (the name con-

sists of up to 8 characters, half-byte English

capital letters and half-byte numerals and the

“_” sign, with a file-extension of three charac-

ters).

Level 2:

The file name can have up to 31 characters (in-

cluding the separation mark “.” and a file ex-

tension). Each folder contains less than 8

hierarchies.

Extended formats

Joliet:

File names can have up to 64 characters.

Romeo:

File names can have up to 128 characters.

Linear PCM (LPCM)/Pulse code

modulation

This stands for linear pulse code modulation,

which is the signal recording system used for

music CDs and DVDs. Generally, DVDs are re-

corded with higher sampling frequency and

bit rate than CDs. Therefore, DVDs can provide

higher sound quality.

m3u

Playlists created using the “WINAMP” sof t-

ware have a playlist file extension (.m3u).

MP3

MP3 is short for MPEG Audio Layer 3. It is an

audio compression standard set by a working

group (MPEG) of the ISO (International Stan-

dards Organization). MP3 is able to compress

audio data to about 1/10th the level of a con-

ventional disc.

MPEG

This stands for Moving Pictures Experts

Group, and is an international video image

compression standard. Some DVDs feature di-

gital audio compressed and recorded using

this system.

Multi-angle

With regular TV programs, although multiple

cameras are used to simultaneously shoot

scenes, only images from one camera at a

time are transmitted to your TV. Some DVDs

feature scenes shot from multiple angles, let-

ting you choose your viewing angle as desired.

Multi-audio (Multilingual dialog)

Some DVDs feature dialog recorded in multi-

ple languages. Dialog in up to 8 languages

can be recorded on a single disc, letting you

choose as desired.

Multi-session

Multi-session is a recording method that al-

lows additional data to be recorded later.

When recording data on a CD-ROM, CD-R or

CD-RW, etc., all data from beginning to end is

treated as a single unit or session. Multi-ses-

sion is a method of recording more than 2 ses-

sions on one disc.

Multi-subtitle

Subtitles in up to 32 languages can be re-

corded on a single DVD, letting you choose as

desired.

Optical digital output/input

By transmitting and receiving audio signals in

a digital signal format, the chance of sonic

quality deteriorating in the course of transmis-

sion is minimized. An optical digital output/

input is designed to transmit and receive digi-

tal signals optically.

Packet write

This is a general term for a method of writing

on CD-R, etc., at the time required for a file,

just as is done with files on floppy or hard

discs.

Additional Information

Appendix

Additional Information

Parental lock

Some DVD video discs with violent or adult-or-

iented scenes feature parental lock which pre-

vents children from viewing such scenes. With

this kind of disc, if you set the unit’s parental

lock level, playback of scenes inappropriate for

children will be disabled, or these scenes will

be skipped.

Playback control (PBC)

This is a playback control signal recorded on

Video CDs (Version 2.0). Using menu displays

provided by Video CDs with PBC lets you enjoy

playback of simple interactive software and

software with search functions. You can also

enjoy viewing high- and standard-resolution

still images.

Region number

DVD players and DVD discs feature region

numbers indicating the area in which they

were purchased. Playback of a DVD is not pos-

sible unless it features the same region num-

ber as the DVD player. This unit’s region

number is displayed on the bottom of the unit.

Title

DVD video discs have high data capacity, en-

abling recording of multiple movies on a sin-

gle disc. If, for example, one disc contains

three separate movies, they are divided into

title 1, title 2 and title 3. This lets you enjoy the

convenience of title search and other func-

tions.

VBR

VBR is short for variable bit rate. Generally

speaking CBR (constant bit rate) is more

widely used. But by flexibly adjusting the bit

rate according to the needs of audio compres-

sion, it is possible to achieve compression-

priority sound quality.

WMA

WMA is short for Windows Media™ Audio

and refers to an audio compression technol-

ogy that is developed by Microsoft

Corporation. WMA data can be encoded by

using Windows Media Player version 7 or

later.

Windows Media and the Windows logo are tra-

demarks or registered trademarks of Microsoft

Corporation in the United States and/or other

countries.

Additional Information

Appendix

Specifications

General

Power source ............................. 14.4 V DC (10.8 V to 15.1 V

allowable)

Grounding system ................... Negative type

Max. current consu mption

..................................................... 10.0 A

Dimensions (W × H × D):

DIN

Chassis ..................... 178 × 50 × 160 mm

Nose ........................... 188 × 58 × 33 mm

Chassis ..................... 178 × 50 × 165 mm

Nose ........................... 170 × 46 × 28 mm

Weight .......................................... 2.4 kg

Display

Screen size/aspect ratio ....... 7.0 inch wide/16:9

(effective display area: 154

× 87 mm)

Pixels ............................................. 336 960 (1 440 × 234)

T ype ................................................ TFT active matrix, transmis-

sive type

Color system .............................. PAL/SECAM compatible

Storage temperature range

..................................................... -20 °C to +80 °C

Angle adjustment .................... 50° to 110°

(initial settings: 90°)

Audio

Maximum power output ....... 50 W × 4

50 W × 2/4 W + 70 W × 1/2

W (for subwoofer)

Continuous power output ... 22 W × 4 (50 Hz to 15 000

Hz, 5% THD, 4 W load, both

channels driven)

Load impedance ...................... 4 W to 8 W ×4

4 W to 8 W ×2+2W ×1

Preout max output level/output impedance

..................................................... 4.0 V/100 W

Equalizer (7-Band Graphic Equalizer):

Frequency .......................... 50/125/315/800/2k/5k/12.5k

Gain ...................................... ±12 dB

Loudness contour:

Low ....................................... +3.5 dB (100 Hz), +3 dB (10

kHz)

Mid ....................................... +10 dB (100 Hz), +6.5 dB

(10 kHz)

High ..................................... +11 dB (100 Hz), +11 dB

(10 kHz)

(volume: –30 dB)

HPF:

Frequency .......................... 50/63/80/100/125 Hz

Slope .................................... –12 dB/oct

Subwoofer (mono):

Frequency .......................... 50/63/80/100/125 Hz

Slope .................................... –18 dB/oct

Gain ...................................... +6 dB to –24 dB

Phase .................................. Normal/Reverse

Bass boost:

Gain ...................................... +12 dB to 0 dB

DVD Player

System .......................................... DVD video, DVD-VR, Video

CD, CD, WMA, MP3, AAC,

DivX system

Usable discs .............................. DVD video, Video CD, CD,

CD-R/RW, DVD-R/RW

Region number ........................ 5

Signal format:

Sampling frequency ..... 44.1/48/96 kHz

Number of quantization bits

........................................... 16/20/24; linear

Frequency response ............... 5 Hz to 44 000 Hz (with DVD,

at sampling frequency 96

kHz)

Signal-to-noise ratio ............... 97 dB (1 kHz) (IEC -A net-

work)

(CD: 96 dB (1 kHz) (IEC-A

network))

Dynamic range ......................... 95 dB (1 kHz)

(CD: 94 dB (1 kHz))

Distortion ..................................... 0.008 % (1 kHz)

Output level:

Video .................................... 1.0 Vp-p/75 W (±0.2 V)

Number of channels .............. 2 (stereo)

MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3

WMA decoding forma t ......... Ver. 7, 7.1, 8, 9, 10 (2ch

audio)

(Windows Media Player)

AAC decoding format ............ MPEG-4 AAC (iTunes

en-

coded only)

DivX decoding forma t ............ Home Theater Ver. 3, 4, 5.2

(.avi .divx)

FM tuner

Frequency range ...................... 87.5 MHz to 108.0 MHz

Usable sensitivity ..................... 8 dBf (0.7 µV/75 W, mono,

S/N: 30 dB)

Additional Information

Appendix

Additional Information

Signal-to-noise ratio ............... 75 dB (IEC-A network)

Distortion ..................................... 0.3 % (at 65 dBf, 1 kHz,

stereo)

0.1 % (at 65 dBf, 1 kHz,

mono)

Frequency response ............... 30 Hz to 15 000 Hz (±3 dB)

Stereo separation .................... 45 dB (at 65 dBf, 1 kHz)

MW tuner

Frequency range ...................... 531 kHz to 1 602 kHz (9 kHz)

Usable sensitivity ..................... 18 µV (S/N: 20 dB)

Signal-to-noise ratio ............... 65 dB (IEC-A network)

LW tuner

Frequency range ...................... 153 kHz to 281 kHz

Usable sensitivity ..................... 30 µV (S/N: 20 dB)

Signal-to-noise ratio ............... 65 dB (IEC-A network)

Note

Specifications and the design are subject to pos-

sible modifications without notice due to im-

provements.

Additional Information

100

Appendix

Angle icon ..................................................29,.42

Aspect ratio ...............................................42,.96

Audio language .........................................28,.41

Bookmark .........................................................28

Brightness ........................................................49

Chapter .............................................................96

Code number ...................................................42

Color .................................................................49

Contrast ............................................................49

DivX ...................................................................96

DivX Certified ...................................................96

DTS ...............................................................9,.96

Dynamic range control ..................................96

Hue ...................................................................49

Language code chart .....................................95

Linear PCM (LPCM) ........................................97

Menu language ...............................................41

MPEG ................................................................97

Multi-angle .................................................29,.97

Multi-audio .................................................28,.97

Multi-subtitle ..............................................29,.97

Optical digital output/input .......................... .97

Parental lock ..............................................42,.98

PBC (playback control) ..................................25

Playback control (PBC) ..................................98

Region number ...........................................8,.98

Subtitle language ......................................29,.40

Title ...................................................................98

TV aspect ..........................................................42

Video CD ............................................................8

Wide screen mode ..........................................48

Index

101

PIONEER CORPORATION

4-1, MEGURO 1-CHOME, MEGURO-KU

TOKYO 153-8654, JAPAN

PIONEER ELECTRONICS (USA) INC.

P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.

TEL: (800) 421-1404

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium

TEL: (0) 3/570.05.11

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

253 Alexandra Road, #04-01, Singapore 159936

TEL: 65-6472-7555

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

178-184 Boundary Road, Braeside, Victoria 3195, Australia

TEL: (03) 9586-6300

PIONEER ELECTRONICS OF CANADA, INC.

300 Allstate Parkway, Markham, Ontario L3R OP2, Canada

TEL: 1-877-283-5901

PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.

Blvd.Manuel Avila Camacho 138 10 piso

Col.Lomas de Chapultepec, Mexico, D.F. 11000

TEL: 55-9178-4270

先鋒股份有限公司

總公司 : 台北市中山北路二段44號13樓

電話 : (02) 2521-3588

先鋒電子（香港）有限公司

香港九龍尖沙咀海港城世界商業中心

9樓901-6室

電話 : (0852) 2848-6488

Published by Pioneer Corporation.

Printed in Thailand

<CRB2362-A/N> RE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer AVH-P5900DVD in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer AVH-P5900DVD

Pioneer AVH-P5900DVD Installation Guide - English, German - 86 pages

Pioneer AVH-P5900DVD User Manual - German - 117 pages

Pioneer AVH-P5900DVD Installation Guide - Dutch - 86 pages

Pioneer AVH-P5900DVD User Manual - Dutch - 112 pages

Pioneer AVH-P5900DVD Installation Guide - French - 86 pages

Pioneer AVH-P5900DVD User Manual - French - 116 pages

Pioneer AVH-P5900DVD Installation Guide - Italian, Spanish - 86 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer AVH-P5900DVD Manual

Product: