649351
33
Zoom out
Zoom in
Previous page
1/45
Next page
33
Power cord
1
2
3
4
5
6
7
8
9
a
b
c
1 To power supply
2 Power cord
3 Yellow
To terminal supplied with power regardless of ignition switch
position.
4
Red
To electric terminal controlled by ignition switch (12 V DC)
ON/OFF.
5
Orange/white
To lighting switch terminal.
6
Black (ground)
To vehicle (metal) body.
7
Violet/white
Of the two lead wires connected to the back lamp, connect
the one in which the voltage changes when the gear shift
is in the REVERSE (R) position. This connection enables
the unit to sense whether the car is moving forwards or
backwards.
8
Blue/white
Connect to system control terminal of the power amp (max.
300 mA 12 V DC).
9
Light green
Used to detect the ON/OFF status of the parking brake. This
lead must be connected to the power supply side of the
parking brake switch.
a
Power supply side
b Parking brake switch
c Ground side
Parking Brake
1 If “Light green” cable is connected to parking
brake switch, video image on the display will
be controlled by this function.
2 The monitor displays the black screen with
warning information to prevent the driver
watching video contents during driving.
Speaker leads
1
2
9
a
d
e
7
43
5
6
8
b
c
LR
F
R
Perform these connections when using a subwoofer without the
optional amplifier.
d
e
43
f
b
c
LR
SW
b
c
g
e
d
h i
1 To power supply
2 Power cord
3 Left
4 Right
5 Front speaker
6 Rear speaker
7 White
8 White/black
9 Gray
a Gray/black
b Green
c Green/black
d Violet
e Violet/black
f Subwoofer(4Ω)
g Whenusingasubwooferof70W(2Ω),besuretoconnect
the subwoofer to the violet and violet/black leads of this unit.
Do not connect anything to the green and green/black leads.
h
Not used.
i Subwoofer(4Ω)×2
When a subwoofer is connected to this product instead of
a rear speaker, change the rear output setting in the initial
setting. The subwoofer output of this product is monaural.
Switching the rear speaker output on page 26
With a two-speaker system, do not connect anything to the
speaker leads that are not connected to speakers.
Notice for the blue/white lead
When the ignition switch is turned on (ACC ON), a control
signal is output through the blue/white lead. Connect to an
external power amp’s system remote control terminal, the
auto-antenna relay control terminal, or the antenna booster
power control terminal (max. 300 mA 12 V DC). The control
signal is output through the blue/white lead, even if the
audio source is switched off.
This product
1
2
3 4 5 67 8
1 Microphone 4 m (13 ft. 1 in.)
(AVH-280BT)
2 This product
3 Antenna jack
4 Wired remote input
Hard-wired remote control adapter can be connected (sold
separately).
5
Power supply
6 Fuse (10 A)
7 Front output
8 Rear output or subwoofer output
33< QRD3356-A >
Connection Connection
33


Need help? Post your question in this forum.

Forumrules
1

Forum

pioneer-avh-280bt

Reset search

  • How do i get back to the initial display after settings are done? Submitted on 17-9-2022 at 18:47

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer AVH-280BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer AVH-280BT in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer AVH-280BT

Pioneer AVH-280BT Installation Guide - English, German - 48 pages

Pioneer AVH-280BT User Manual - German - 44 pages

Pioneer AVH-280BT Installation Guide - Dutch - 48 pages

Pioneer AVH-280BT User Manual - Dutch - 43 pages

Pioneer AVH-280BT Installation Guide - French - 48 pages

Pioneer AVH-280BT User Manual - French - 43 pages

Pioneer AVH-280BT Installation Guide - Italian, Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info