162112
94
Zoom out
Zoom in
Previous page
1/109
Next page
Initial Settings
En
12
Section
94
Switching the guidance
display for intersection
The display can be magnified around an inter-
section to facilitate navigation (only when the
source is turned off).
1 With the source turned off, press and
hold 1.
2Press NEXT and then press N.INT to se-
lect the intersection display mode.
3Press N.INT to turn the enlarged dis-
play off.
OFF” appears on the display.
Press N.INT again to turn the enlarged dis-
play on.
Setting the rear output
and subwoofer controller
This product’s rear output (rear speaker leads
output and RCA rear output) can be used for
full-range speaker (FULL Preout :FULL) or
subwoofer (SUB.W) connection. If you switch
the rear output setting to “SUB.W”, you can
connect a rear speaker lead directly to a sub-
woofer without using an auxiliary amp.
Initially, the unit is set for rear full-range
speaker connection (FULL Preout :FULL).
When rear output is connected to full range
speakers (when “FULL Preout :FULL” is se-
lected), you can connect the RCA subwoofer
output to a subwoofer. In this case, you can
select whether to use the subwoofer control-
ler’s (low pass filter, phase) built-in FULL Pre-
out :SUB.W or the auxiliary FULL Preout
:FULL.
1 With the source turned off, press and
hold 1.
2Press NEXT and then press REAR to se-
lect the rear output setting mode.
3Press SW or FULL to select the desired
output setting.
Pressing SW or FULL will switch between
FULL” (full-range speaker) and “SUB.W
(subwoofer), and that status will be displayed.
When no subwoofer is connected to the rear
speaker lead output, select “FULL Preout :FULL”.
When a subwoofer is connected to the rear
speaker lead output, select “SUB.W”.
When the rear output setting is “SUB.W”, you
cannot change the subwoofer controller (Step 4).
4Press
or
to switch the subwoofer
output or nonfading output (full-range
RCA output).
Pressing
or
will switch between
FULL Preout :SUB.W” and “FULL Preout
:FULL” and that status will be displayed.
When adjusting the subwoofer sound by us-
ing an external amplifier, set to “FULL Preout
:FULL”.
When adjusting the subwoofer sound by us-
ing this product, set to “FULL Preout :SUB.W”.
Notes
Even if you change this setting, there is no
output unless you turn the nonfading output
(refer to Using nonfading output on page 88)
or subwoofer output (refer to Using subwoofer
output on page 88) in the audio menu on.
If you change the subwoofer controller, sub-
woofer output and nonfading output in the
audio menu return to the factory settings.
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer anh-p10mp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer anh-p10mp in the language / languages: English as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer anh-p10mp

Pioneer anh-p10mp Installation Guide - English, German - 170 pages

Pioneer anh-p10mp User Manual - German - 124 pages

Pioneer anh-p10mp Installation Guide - Dutch - 170 pages

Pioneer anh-p10mp User Manual - Dutch - 120 pages

Pioneer anh-p10mp Installation Guide - French, Italian, Spanish - 170 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info