699650
12
Zoom out
Zoom in
Previous page
1/72
Next page
12
Preparations
a Analog Audio Cable
Use an analog audio cable to connect a turntable that uses
an MM-type cartridge to the PHONO jack.
If the turntable has a ground wire, connect it to the SIGNAL
GND terminal. With some turntables, connecting the ground
wire may cause hum, in which case it should be
disconnected.
0 If the turntable has a built-in audio equalizer, connect it to
an LINE IN jack other than the PHONO jack. Also, if the
turntable uses an MC type cartridge, install an audio
equalizer compatible with the MC type cartridge between
the unit and the turntable, then connect to any LINE IN
jack other than the PHONO jack.
a Monaural Miniplug Cables (without resistors),
b Analog Audio Cable
If you have multiple Pioneer brand devices, and if they have
CONTROL IN/OUT jacks, you can centrally control them
through the remote controller sensor on this unit. By
connecting with monaural miniplug cables (without resistors)
as shown in the illustration, operation with the remote
controller is possible even if devices are installed where they
cannot receive the signal from the remote controller.
0 Also make sure to connect with the analog audio cable.
Centralized control cannot work correctly with only the
control jack connection. When connecting a player using
either a digital optical cable or digital coaxial cable, also
make sure to connect with an analog audio cable.
0 The remote controller sensors on the other devices stop
working if you connect a monaural miniplug cable (without
resistor) to the CONTROL OUT jack of this unit.
0 The remote controller sensor on this unit stops working if
you connect a monaural miniplug cable (without resistor)
to the CONTROL IN jack of this unit.
Connecting players (Turntable
connection)
a
Turntable
Connecting devices to link with the
control function
CONTROL
IN
OUT
a
b
Audio device
SN29403415_A-40AE_En_1804XX.book 12 ページ 2018年5月23日 水曜日 午後3時19
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer A-40AE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer A-40AE in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 6,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer A-40AE

Pioneer A-40AE User Manual - German, Dutch, Italian, Swedish - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info