455173
10
Zoom out
Zoom in
Previous page
1/38
Next page
10
Fr/It
UTILISATION
2. Sélectionnez le sens de la copie à l'aide du bouton
INPUT SELECTOR et du bouton TAPE 2 MONI-
TOR.
÷ Pour effectuer une copie de la platine à cassette raccordée aux
bornes TAPE 1/CD-R/MD vers celle raccordée aux bornes
TAPE 2 MONITOR : Régler le bouton INPUT SELECTOR sur la
position TAPE 1/CD-R/MD.
÷ Pour effectuer une copie de la platine à cassette raccordée aux
bornes TAPE 2 MONITOR vers celle raccordée aux bornes
TAPE 1/CD-R/MD : Régler le bouton TAPE 2 MONITOR sur la
position ON et le bouton INPUT SELECTOR sur une position
autre que TAPE 1/CD-R/MD.
3. Mettre en service les platines cassettes pour
commencer la copie.
Régler la platine contenant la cassette originale pour la lecture
et la platine contenant la cassette vierge pour l’enregistrement.
FUNZIONAMENTO
2. Selezionare il lato di riproduzione del nastro con
la manopola INPUT SELECTOR ed il pulsante
TAPE 2 MONITOR.
÷ Per copiare dai terminali del mangianastri TAPE 1/CD-R/
MD ai terminali TAPE 2 MONITOR del mangianastri,
impostare la manopola INPUT SELECTOR su TAPE 1/CD-R/
MD.
÷ Per copiare dai terminali del mangianastri TAPE 2 MONI-
TOR ai terminali TAPE 1/CD-R/MD, impostare il comando
TAPE 2 MONITOR e la manopola INPUT SELECTOR in una
posizione diversa da TAPE 1/CD-R/MD.
3. Adoperate le piastre a cassette per avviare la
duplicazione.
Impostate il modo di riproduzione nella piastra a cassette
contenente il nastro originale (da riprodurre) ed impostate il
modo di registrazione nella piastra a cassette contenente un
nastro vergine.
POUR UTILISER L’APPAREIL CONNECTE
AUX BORNES TAPE 2 MONITOR
[Pour une platine cassette]
÷ Une platine cassette connectée peut-être utilisée de la même
manière (enregistrement et lecture) qu’une platine connectée
aux bornes TAPE 2 MONITOR.
÷ De plus, si deux platines sont utilisées, il est possible de copier
les bandes d’une platine sur l’autre (voir la section “COPIE DE
BANDES”).
1. Régler la touche TAPE 2 MONITOR sur activée.
2. Faire fonctionner la platine cassette pour la lec-
ture (ou l’enregistrement).
REMARQUE:
La source sélectionnée avec le bouton INPUT SELECTOR est
sauvegardée pendant quelques jours même lorsque l'interrupteur
principal est coupé ou que le cordon d'alimentation est retiré de
la prise de courant.
Après cette période, le CD est automatiquement sélectionné lors
de la mise sous tension.
[Pour un appareil adaptateur]
En raccordant un égalisateur graphique, les sons de base (issus
de disques, de bandes magnétiques, d'émissions AM/FM, etc.)
peuvent être entendus avec une compensation sonore et tonale
supplémentaire.
Les sons compensés à l’aide de l’adaptateur peuvent être
enregistrés sur la platine à cassette raccordée aux bornes TAPE
1/CD-R/MD.
1. Régler la touche TAPE 2 MONITOR sur activée.
2. Reproduire la source.
3. Faire fonctionner l’appareil adaptateur.
REMARQUE:
Toujours effectuer cette opération avec l’interrupteur
d’alimentation du composant adaptateur réglé sur la position
ON. Même si le composant adaptateur n’est pas utilisé, son
interrupteur d’alimentation doit être en service. Si le composant
adaptateur est hors circuit, aucun son n’est produit ou le son
reproduit est déformé.
USO DEL COMPONENTE COLLEGATO
AI TERMINALI TAPE 2 MONITOR
[Deck a cassette]
÷ Un deck a cassette collegato a questi terminali può essere
fatto funzionare (per registrazione e riproduzione) come il
deck collegato ai terminali TAPE 2 MONITOR.
÷ Nel caso in cui vengano usati due deck, si può anche procedere
alla duplicazione del nastro da un deck all’altro (vedere la
sezione “DUPLICAZIONE DI NASTRI”).
1. Disporre il tasto TAPE 2 MONITOR su ON.
2. Far funzionare il deck per la riproduzione (o la
registrazione).
NOTA:
La fonte selezionata con la manopola INPUT SELECTOR rimane
selezionata per alcuni giorni anche quando viene spento
l’apparecchio o scollegato il cavo di alimentazione.
Trascorso questo breve periodo di tempo, al momento
dell’accensione l’apparecchio seleziona automaticamente la
posizione CD.
[Componente tipo regolatore]
Collegando un equalizzatore grafico è possibile potenziare i
suoni (da dischi, nastri, radio AN/FM ecc.) e compensare i toni.
I suoni compensati con l’adattatore possono essere registrati sul
mangianastri collegato ai terminali TAPE 1/CD-R/MD.
1. Disporre il tasto TAPE 2 MONITOR su ON.
2. Riprodurre la sorgente.
3. Far funzionare il componente regolatore.
NOTA:
Assicuratevi di effettuare questa operazione con l’interruttore
dell’adattatore nella posizione ON. Anche se non usate l’adattatore,
è necessario che l’interruttore di alimentazione rimanga nella
posizione ON. Nel caso in cui viene disattivato l’adattatore, non
verrà riprodotto nessun suono oppure il suono riprodotto sarà
distorto.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer A-109 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer A-109 in the language / languages: Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info