257714
19
Zoom out
Zoom in
Previous page
1/92
Next page
CLEAN / CLEAN PLUS – 19
The following table lists all functions in the Record dialog:
Input level meters These two “LED” meters display the level of the signal that ar-
rives at CLEAN’s input. It is a good idea to set the input level so
that level peaks reach the yellow “LED” area but never the red
segment at the top. If the signal is too low, you will record noise,
if it is too high, it will clip drastically and not sound good.
Input level faders
(Attenuation)
These Faders can be used to attenuate the signal that arrives at
CLEAN’s input. The signal might have already been set at the
source outside the computer or by the Mixer software of your
sound card. Find additional information in the next two sections
(“The Sound card dialog” and “Setting Record and Playback vol-
ume”).
Speaker symbol By clicking on this icon, you open the Windows Audio Mixer
which is used to activate inputs and outputs and control the lev-
els of your sound card. If your computer is equipped with a sound
card that has its own Mixer software, then this may have to be
opened in a different manner. You should then either look up your
sound card documentation or check the Windows Control Panel
directory.
Record Path Here you can define the path under which your recordings are
stored on your hard disk. If you click on the button with the three
dots, you can define the path using a file selector.
Recording length
and size
As soon as recording starts, the length of the recording in hours,
minutes and seconds is displayed here. The value in brackets
shows the actual size of the recorded file.
AutoMarker/-Stop
(Threshold)
If the AutoMarker or AutoStop function (see below) is checked
means active and the level of the recorded song falls below the
value set here, CLEAN will automatically stop recording or insert
a Marker into the waveform.
Delay AutoMarker This function is active if the check mark is visible to the left of the
pop-up menu. If this function is active, you can select a delay
time in the pop-up. When the signal falls below the Threshold
defined under AutoMarker/-Stop (Threshold), the program waits
for the time-span defined here before it inserts a Marker. This
may be useful if the song ends with a long decay. Markers are
used to let CLEAN automatically cut a longer recording into sep-
arate tracks.
AutoStart
(Threshold)
This function is active if the check mark is visible to the left of the
pop-up menu. If this function is active, CLEAN will automatically
start recording, as soon as the source signal has a higher level
than the one set here.
Record Duration
(h:mm)
This function is active if the check mark is visible to the left of the
field. Instead of using the AutoStop function (see below) to stop
recording, you can insert a time value in this field after which re-
cording is stopped automatically. You can set a recording length
in hours and minutes. The maximum value is 2 hours. This func-
tion is not available, if you have activated Delay AutoStop.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pinnacle steinberg clean plus 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pinnacle steinberg clean plus 5 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pinnacle steinberg clean plus 5

Pinnacle steinberg clean plus 5 User Manual - Dutch - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info