257714

Pinnacle steinberg clean plus 5 Manual

6
Zoom out
Zoom in
Previous page
1/92
Next page
6 – CLEAN / CLEAN PLUS
As a record can only provide ca. 60 dB, your sound card will most probably
be sufficient to produce good recordings on your PC. You should still only
use ca. 85% of the theoretically possible recording level. This way, you do
not run the risk to produce ugly sounding digital distortions caused by a too
high level; or undesired noise, if you record more than 60 dB. These un-
wanted effects only make the work of the restoration algorithms harder and
increase the deep-frequency rumble noise of the record player.
The hunt for the optimum level
One obstacle for many audio recordings on the computer is finding the right
level adjustments. Sound cards do not always offer a reliable level display. In
order to make the best possible setting for your system, you should use the
same methods that are used in a professional recording studio:
Use test signals with an exactly defined level of 0 dB to adjust the wave
channel and master levels of your sound card as well as that of other possi-
bly used devices like DAT, MD or cassette recorders.
In the Calibrate directory on the CLEAN CD you can find the files 1kHz
Tone.wav, 10 kHz Tone.wav, 80 Hz Tone.wav and 100 Hz Tone.wav. These
sound files contain pure sinusoidal signals with an exact level of 0 dB.
❐
Attention: The Test tones are very loud! Make sure that volume is reduced to a
minimum on your monitoring system before you load and play back any of
these tones. Do so to take care of your speakers, your ears and the good rela-
tions to your neighbours.
You can use the cycle playback feature in CLEAN for continuous playback,
then you don’t have to start playback again and again.
While playing back one of the test tones, you can adjust the level of your
complete system. First, you should use the Output faders in CLEAN to set
the output volume in a way that your sound card does not overload.
❐
The Windows MME driver only lets you control the output volume if your sound
card has a software Mixer panel.
You can also record the test tone with your DAT, MD or cassette recorder,
if your sound card is connected to a stereophonic sound system. Use the in-
put controls of these devices to set them to a maximum input of 0 dB. You
should not change these settings later.
Have fun applying CLEAN to your favourite music.
The Pinnacle-Steinberg Team
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pinnacle steinberg clean plus 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pinnacle steinberg clean plus 5 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pinnacle steinberg clean plus 5

Pinnacle steinberg clean plus 5 User Manual - Dutch - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info