725645
27
Zoom out
Zoom in
Previous page
1/36
Next page
INSTALLATION WORK
27
REMOVING TRANSMISSION
)
Unscrew the pulling cable at the rotary shifter –see INSTALLING OR REPLACING
PULLING CABLES, page13.
Danger of injury if the transmission drops down – approx. 2.7 kg (6 lb) weight.
Î
Get a helper to secure the transmission during removal.
)
Initially only loosen the 2 bottom retaining screws
(
fig. 36
)
.
)
Unscrew the 4 upper retaining screws.
)
If necessary, remove the transmission from the bicycle frame bridge with
assembly irons, and tilt it downwards.
)
Get a helper to secure the transmission.
)
Unscrew the 2 lower retaining screws.
)
Remove transmission in the bicycle frame bridge.
3 mm
1.
2.
3.
4.
6.
10 N·m (89 lbf·in) max.
T30
5.
35
)
Make sure that all contact points between the transmission and bicycle frame
bridge are clean and coated with carbon assembly paste (e.g. DYNAMIC).
)
Apply fresh screw locking fluid (medium) to the transmission retaining screws.
)
Position transmission in the bicycle frame bridge.
)
Install all retaining screws.
)
Tighten retaining screws in the specified sequence
(
fig. 35
)
with a tightening
torque of 10 Nm (89 lbf·in).
ÎÎ
The installation of the transmission is complete.
Housing screws
(
2
)
are stress bolts. They are not allowed to be retightened under any
circumstances and – once unscrewed – must be replaced by new ones!
(
fig. 35
)
1
2
3.
6.
3
mm
T30
5.
2.
1.
4.
36
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pinion P-line at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pinion P-line in the language / languages: English as an attachment in your email.

The manual is 14,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pinion P-line

Pinion P-line User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info