565195

Pifco P19004 Manual

4
Zoom out
Zoom in
Previous page
1/6
Next page
5 You can now switch the ice cream maker on using the on/o button switch on.
THE MACHINE MUST BE SWITCHED ON BEFORE ADDING THE ICE CREAM
OR SORBET RECIPE TO PREVENT THE MIX FROM IMMEDIATELY FREEZING
ON THE INSIDE OF THE BOWL.
6 Use the chute and pour the ice cream or sorbet mix into the freezer bowl.
When pouring mixture into the bowl, always stop at least 4 cm (1.575 inch) from the top,
as the mixture will increase in volume during freezing.
7 Allow the mixture to churn until frozen or the desired consistency is reached.
is can take up to 15 to 30 minutes, but most recipes will be ready in less time
Important
■Do not stop and start the machine during the freezing process, as the mixture may
freeze in contact with the bowl and prevent movement of the paddle.
■To avoid overheating the motor, the direction of rotation will change
if the mixture becomes too thick. If the direction of rotation continues to change,
stop the machine when the mixture is ready.
■ In the unlikely event of the motor overheating, a safety cut out will operate
causing the motor to stop. If this happens, switch o, unplug the machine
and allow the power unit to cool.
8 Switch o, remove the power unit/lid. e ice cream is ready to serve.
■ e ice cream produced should be a so spoon able type. is can be transferred
to a separate container for storage in the freezer or if you wish to rm the ice
cream before eating.
Important
■ Do not use metal utensils to remove mix from the bowl.
■ Do not remove the freezer bowl from the freezer until ready to make ice cream.
5
USING YOUR APPLIANCE CLEANING YOUR APPLIANCE
Always switch o, unplug and dismantle before cleaning.
■Never put the power unit in water or let the cord or plug get wet.
■Do not wash parts in the dishwasher.
■Do not clean with scouring powders, steel wool pads, or other abrasive materials.
FREEZER BOWL
■Allow the freezer bowl to reach room temperature before attempting to clean.
■Wash the inside of the bowl, then dry thoroughly. Do not immerse in water.
PADDLE
■Remove the paddle from the power unit.
■Wash then dry thoroughly.
LID
■Wash the lid then dry thoroughly.
POWER UNIT
■Wipe with a damp cloth, then dry.
RECIPES
NORMAL ICE CREAM
INGREDIENTS
Skimmed milk 350 ml
Heavy cream 150 ml
Confectioner’s sugar 40 g
Place the skimmed the milk, heavy cream and sugar into a saucepan and mix.
en pour the mixture into the freezer bowl with the paddle running.
Allow to freeze until the desired consistency is achieved.
BANANA ICE CREAM
INGREDIENTS
Large ripe banana 1
Skimmed milk 200 ml
Heavy cream 100 ml
Confectioner’s sugar 50 g
Mash the bananas until smooth. Mix in the milk, heavy cream and sugar. Pour the
mixture into the freezer bowl with the paddle running. Allow to freeze until the
desired consistency is achieved.
5 6
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pifco P19004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pifco P19004 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info