677798
14
Zoom out
Zoom in
Previous page
1/103
Next page
BEACON-CHECK | GROUP-CHECK
Activation of group-check-function:
1. Turn on your PIEPS DSP PRO/DSP SPORT
(Position SEND).
2. Wait until „CH“ appears on the display
(CH = CHECK).
3. Press and continue to hold the
MARK button.
The group-check-function is active as long
as the MARK button is pressed. Release
the MARK button to exit the group-check-
function. After a countdown of three seconds,
your DSP PRO/SPORT automatically turns into
the SEND mode. During the countdown, the
group-check-function can be reactivated.
The maximum range in group-check-mode is
one meter!
Conduct the „big“ beacon-check as follows:
(1) Receiving control
Group leader –SEND-mode: Device is sending?
All others – SEARCH-mode: Devices are receiving?
(2) Transmission control
Group leader – group-check-mode: Device is receiving?
All others –SEND-mode: Devices are sending?
3 second countdown
1
2
Device is not
sending or
distance is too
large (> 1 m).
Device is
sending.
Frequency not
within the
acceptable
range.
TIP! The receive control can be combined
with a range test in long distance.
DEENESFRITCZSKSIRUJP
The Intelligent Transmitter – Maximum support in SEND-mode
In SEND-mode there are functions working in the background of PIEPS DSP PRO/DSP SPORT

Auto-Antenna-Switch



maximum range to the receiving beacon!
iPROBE-Support
Beacons with iPROBE Support* will be automatically deactivated when probing with the
electronic probe PIEPS iPROBE. Signal overlap is eliminated and the next strongest signal
is automatically shown on the display of the receiving beacon. The PIEPS iPROBE supports
maximal in the case of a multiple burial. See also chapter „Multiple Burials“.
The PIEPS iPROBE Support gives the best solution for multiple burial situations!
*Beacons with iPROBE Support: PIEPS DSP PRO, PIEPS DSP SPORT, PIEPS DSP (with Software
version 5.0 or greater), PIEPS DSP TOUR, PIEPS FREERIDE
More information can be found on www.pieps.com.
SEND-MODE
Press the main switch lock and push the main switch to the
“SEND“ position. The display indicates the SEND-symbol,
the remaining battery capacity, and the transmitting antenna.

transmitter bit timing.
When you are on a tour, make sure the “SEND“-mode is selected
throughout. The PIEPS DSP PRO/DSP SPORT will transmit a

all other avalanche beacons (according EN300718).
06/15 ||
06/15 2726
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pieps DSP Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pieps DSP Pro in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info