567931
11
Zoom out
Zoom in
Previous page
1/14
Next page
Settings of the Sound Characteristics
Thanks to the use of the most advanced active electronics, your new subwoofer is a cutting edge product in the
eld of subwoofers. The connection and setting options provided on the subwoofer allow the best possible con-
nection to your stereo or surround sound system and can be adapted to your individual audio requirements.
LEVEL
Use this knob to adjust the subwoofer volume
LED
The LED is off when the loudspeaker is switched off,
and is red when it is in standby mode. During opera-
tion of the subwoofer the LED is green to indicate
trouble-free operation
AUTOMATIC STANDBY
Use this switch to activate the standby function of
the PS 1 / PS 2. This enables the subwoofer to switch
on automatically as soon as a signal is received and
to switch off when there is no more signal. When
the AUTO POWER switch is in the ON position, the
subwoofer stays permanently switched on. Factory
setting: ON
LOW PASS
Use this knob to set the crossover frequency be-
tween subwoofer and full-range speaker according
to the connection method used. This will relieve the
satellite loudspeakers in the bass range. Factory set-
ting: 80 – 100 Hz
PHASE
Use this switch to set the subwoofer to «In Phase»
or «Out of Phase». Depending on the type of loud-
speaker, at setting «0» there will be a phase cancel-
ling (little bass) or a phase correction (normal bass)
Factory setting: 0
VAR. BASS-EQ. – SOUND CHARACTERISTIC
Use this knob to change the sound of the subwoofer
from «dry, sharp, crisp» to «warm, soft and well-
rounded»
ON AUTOMATIC
POWER
L R
L R
LFE LINE IN LINE OUT
LEVEL
MIN
MAX
MIN
MAX
0
180
VAR. PHASE PHASE
40Hz
200Hz
LOW PASS
MIN
MAX
VAR: BASS EQ
HIGH PASS
100 Hz
80 Hz
60 Hz
User Manual PIEGA PS 1 / PS 2
11
HIGH PASS (PS 2 only)
The HIGH PASS switch enables you to activate a high
pass filter for the LINE OUT outputs of the satellites.
Select 60, 80 or 100 Hz depending on the size of the
loudspeaker.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Piega PS 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Piega PS 1 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info