643482
43
Zoom out
Zoom in
Previous page
1/52
Next page
DT2010093-06
7.9 REPLACING ThE wINdOw
The stove is tted with a 0.197” / (5 mm) thick ceramic glass panel, resistant to thermal shock up to 1382°F / (750°C); the glass can only be broken
by heavy impact or misuse.
Do not slam the door or hit the window.
In case of breakage replace only with a Gruppo Piazzetta spare part.
To replace, proceed as follows:
- wear protective gloves;
- remove the door and lie it at;
- loosen the screws visible on the inside of the door;
- remove the frame and glass carefully;
- if the breglass seal and glazing bead have deteriorated, replace them;
- change the glass panel then replace the frame, tightening the screws carefully but not excessively;
- remount the door.
If other problems occur, consult your nearest retailer.
DT2010094-00
7.10 REPLACING ThE REMOTE CONTROL bATTERy
a The remote control is optional.
To change the battery proceed as follows: using a small Philips head screwdriver, remove the screw on the back of the handset. Then holding it
upside down remove the back casing.
Replace the battery (type A23 12V) being careful not to reverse the polarity. Close the handset and dispose of the old battery in the appropriate way.
DT2010095-06
7.11 CLEANING ThE FANS
DT2010096-05
7.12 whEN NOT IN USE
a Any cleaning or maintenance work must be carried out after the CURRENT HAS BEEN SWITCHED OFF.
The stove is tted with fans (smoke extractor and heating) positioned at the bottom rear of the stove.
Any build-up of dust or ash on the blades can unbalance them resulting in noise during operation.
It is necessary to have the fans cleaned annually. Since such an operation involves dismantling certain parts of the stove, have the cleaning carried
out only by authorized personnel or other qualied persons.
When shutting the stove down for the summer, proceed as follows:
- remove all pellets from the hopper and feeding auger;
- carefully clean the grate, the grate support and the ash drawer;
- using a steel brush, clean the bafe plate or internal bafe plates of the rebox and coat them using the spray paint, supplied with the kit, to prevent
them from oxidising and consequently forming rust.
a If the cast-iron parts inside the rebox are not coated, rust could form. This is a natural process, which does not affect the efciency
and quality of the product.
- Clean the ue thoroughly: contact a professional chimneysweep for this purpose;
- clean by removing all dust, cobwebs, etc. from the area behind the inner lining panels once a year, in particular the fans;
- disconnect the power cable from the power supply;
- remove the batteries from the remote control.
H07029330 / DT2001081 – 02
43
English
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Piazzetta SABRINA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Piazzetta SABRINA in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info