643487
64
Zoom out
Zoom in
Previous page
1/72
Next page
DT2010096-04
7.12 WHEN NOT IN USE
When shutting the stove down for the summer, proceed as follows:
- remove all pellets from the hopper and feeding auger;
- carefully clean the grate, the grate support and the ash drawer;
- using a steel brush, clean the bafe plate or internal bafe plates of the rebox and coat them using a spray paint (not supplied), to prevent them
from oxidising and consequently forming rust.
a If the cast-iron parts inside the rebox are not coated, rust could form. This is a natural process, which does not affect the efciency
and quality of the product.
- Clean the ue thoroughly: contact a professional chimneysweep for this purpose;
- clean by removing all dust, cobwebs, etc. from the area behind the inner lining panels once a year, in particular the fans;
- disconnect the power cable from the power supply;
- remove the batteries from the remote control.
DT2012636-00
7.13 SCHEDULED MAINTENANCE
a Scheduled maintenance must be carried out ONCE A YEAR and prior to starting up the appliance, especially after a long period of
inactivity. This maintenance is necessary to ensure the appliance remains in efcient and safe working order.
a The appliance must be DISCONNECTED FROM THE POWER SUPPLY for all cleaning and maintenance work.
a Since the following maintenance necessitates removing some parts of the appliance, it is advisable to have the scheduled maintenance
carried out by an After-Sales Service Centre or a qualied person.
- Clean the grate (see “CLEANING THE GRATE”).
- Clean the rebox (see “CLEANING THE FIREBOX”).
- Clean the ue system (see “CLEANING THE FLUE SYSTEM”).
- Clean the painted metal parts (see “CLEANING THE PAINTED METAL PARTS”).
- Clean the glass (see “CLEANING THE GLASS”).
- Clean the fans (see “CLEANING THE FANS”).
- Clean away dust and cobwebs from the gap between the appliance and the cladding.
- Check the electrical part and the electronic components.
- Check the tightness and state of the gaskets/seals of the glass door and of all the elements subject to wear and if necessary replace.
- Carry out all maintenance and checks required for correct operation and compliance with safety regulations and standards.
- Light the appliance in accordance with instructions given under “LIGHTING FOR THE FIRST TIME”.
Fig. 75
a Since such a procedure involves dismantling certain parts of
the stove, have the cleaning carried out only by a Piazzetta
Service Centre or other qualied persons.
To access the room fan/s, remove the side ceramic panel/s (see
instructions in CLADDING booklet).
Remove the cover plate (A) screwed onto the external housing by
loosening the screws. (Fig. 74)
Clean the fan/s (Fig. 75) then ret the cover plate (A) and the side
ceramic panel/s.
H07032120 / DT2002308 – 00
64
English
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Piazzetta P963 M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Piazzetta P963 M in the language / languages: English as an attachment in your email.

The manual is 4,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info