Manual Piazzetta P963 M (page 47 of 72) (English)

643487

Zoom out

Zoom in

1/72

MULTICOMFORT

This function is used to choose the sensor for reading the room temperature: from the stove or from the remote control. To make the

most of the Multifuoco fan functions read the paragraphs MULTIFUOCO SYSTEM and MULTICOMFORT OPERATION.

Function Action Display

Select the

MULTICOMFORT

Press the MENU key, then using the SELECT MENU key select the

MULTICOMFORT menu. Conrm by pressing the SET key

MULT I

COMFORT

SELECT

RRC

SELECT

STOVE

Select the REMOTE

CONTROL SENSOR

(SELECT RRC) or

STOVE (SELCT STOVE)

Press the SELECT MENU key and select “SELECT RRC” to read the room

temperature from the remote control or “SELECT STOVE” to read the

room temperature from the stove. Conrm by pressing the SET key. After

conrmation the readout function enabled (FUNCTION ENGAGED) will

appear on the display and the remote control will automatically return to

the initial display.

MULT I

COMFORT

SELECT

RRC

SELECT

STOVE

MULT I

COMFORT

SELECT

RRC

SELECT

STOVE

DT2040070-04

DT2010256-00

6.12 MULTICOMFORT

The pellet stove is tted with the Multicomfort function. This works in conjunction with the Multifuoco ventilation system to improve heat distribution.

It allows the room temperature to be read from the stove or from the remote control, so that the Multifuoco settings can be varied according to the

requirements of the rooms to be heated.

If the airow from your stove has been ducted to other rooms you may read the temperature in the room where the stove is installed or in the room

where the remote control is situated.

Example: your stove is installed in a small room and you are ducting the heat only from the rear of the stove (see solution 1 under the paragraph

“MULTIFUOCO SYSTEM”). You can position the remote control in the room to where the hot air has been ducted and set the required temperature

from this room. To carry out the necessary settings see the MULTICOMFORT menu.

The pellet stove is tted with another function which allows the installation to operate with separate fans. This function allows differentiated hot air

distribution from the two fans thereby fully exploiting the functionality of the Multicomfort system.

Example: your stove is installed in one room and hot air is ducted from one fan to an adjoining room (see solution 2 under the paragraph “MULTIFUOCO

SYSTEM”). You can position the remote control in the room to where the hot air has been ducted and set the required temperature from this room.

You can also set the fans separately, increasing or decreasing the Multifuoco airow for the same room.

To carry out the necessary settings see the MULTICOMFORT - FANS MODE menu.

For air ow controls see the paragraph entitled “NORMAL OPERATION”.

DT2012431-00

6.13 ENERGY SAVING

When the ENERGY SAVING mode is enabled, automatic startup/ignition and shutdown of the stove is activated at temperature values set by the user

through the STOP and START functions.

The temperature value selected 2, 4 or 6 °F (1, 2 or 3 °C ) in STOP function or selected in START function with negative values -2, -4 or -6 °F (-1, -2

or -3 °C) denes the value from which the Energy Saving mode will either increment or deduct from the room temperature set.

The operating principle is as follows:

when the room temperature measured by the room sensor or the remote control reaches the temperature value programmed by the user, the stove

automatically goes to power level 1 (readout “OK” on the display).

H07032120 / DT2002308 – 00

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Piazzetta P963 M in the language / languages: English as an attachment in your email.

The manual is 4,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Piazzetta P963 M Manual

Product: