643486
31
Zoom out
Zoom in
Previous page
1/72
Next page
STARTUP
Action Description Display
Hold the ON/OFF key
down for several
seconds
1
1
1
CONTROL
12:00 73F
START
PHASE I
1 2:00 73F
START
PHASE II
12:00 73F
A cycle starts with three phases which take the stove into the normal
operating mode:
CONTROL (rst 20 seconds)
The lighter (glow plug) activates.
1
1
1
CONTROL
12:00 73F
START
PHASE I
1 2:00 73F
START
PHASE II
12:00 73F
START PHASE I
The extractor fan starts up.
The fuel-loading auger is activated and starts to feed pellets into the
grate.
1
1
1
CONTROL
12:00 73F
START
PHASE I
1 2:00 73F
START
PHASE II
12:00 73F
START PHASE II
If the lighter has triggered the combustion process, the fuel-loading auger
increases to allow a period of stabilisation and correct combustion of the pellets
in the subsequent normal operating mode.
If during the startup phase the sensor on the ue gas outlet shows a rise in
temperature (sign that the combustion process is underway), the stove is
considered to be lit and goes into the normal operating mode.
DT2040051-07
1
1
1
CONTROL
12:00 73F
START
PHASE I
1 2:00 73F
START
PHASE II
12:00 73F
Action Description Display
Once the startup cycle has been completed successfully the stove
stabilises in the normal operating mode.
The power, fan speed and room temperature may be adjusted during
normal operation.
Shown is an example of the INITIAL DISPLAY in normal operation.
1
1
1
1
1
1
LEVEL
P2
12:0073F
SET
POWER
P3
SET
VENT-1
02
SET ROOM
TEMPERAT.
79F
CLEANING
GRATE
12:00 79F
MAX VENT
FLUE COOL
12:00 79F
Press the
POWER
key and
select
POWER
To adjust the power, press the POWER key and select the desired setting
by pressing the SELECT key.
After the desired setting has been selected the remote control returns to
the INITIAL DISPLAY.
1
1
1
1
1
1
LEVEL
P2
12:0073F
SET
POWER
P3
SET
VENT-1
02
SET ROOM
TEMPERAT.
79F
CLEANING
GRATE
12:00 79F
MAX VENT
FLUE COOL
12:00 79F
NORMAL OPERATION
H07032120 / DT2002308 – 00
31
English
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Piazzetta P963 D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Piazzetta P963 D in the language / languages: English as an attachment in your email.

The manual is 4,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info