643476
45
Zoom out
Zoom in
Previous page
1/64
Next page
by the user, the stove automatically goes to power level 1 (readout “OK” on the display).
If the room temperature continues to rise with operation at power level 1 up to the value set on the STOP function (e.g. +4 °F / +2 °C compared to
the programmed temperature), the stove shuts down and goes into the stand-by mode.
When the room temperature measured by the room sensor, the remote control or the external thermostat drops to the temperature value set by the
user on the START function (e.g. -6 °F / -3 °C compared to the programmed temperature), the stoves starts a new ignition phase and goes back to
the power level previously set by the user.
a The stove only restarts when the temperatures measured on the actual stove allow its use in all safety.
If the STOP and OFF functions are enabled, upon reaching the programmed room temperature, the stove will operate in the conventional way by
going to power level 1 without shutting down.
Likewise with the START and OFF enabled the stove does not start the startup/ignition phase after automatic shutdown and will remain off.
ENERGY SAVING
Function Action Display
Select the ENERGY
SAVING menu
Press the MENU key, then using the SELECT MENU key select the ENERGY
SAVING function and conrm by pressing the SET key.
1
1
1
1
1
ENERGY
S AVING
S TOP
S TART
OFF
ENS P2
LEVEL
ENERGY
S AVING OK
12:00 73F
12:00 73F
2F
Select the value to
be set for shutdown
temperature
Press the SELECT MENU key and then select the temperature set point 2,
4 or 6 °F (1, 2 or 3 °C) or disable the function by selecting OFF.
Conrm by pressing the SET key.
1
1
1
1
1
ENERGY
S AVING
S TOP
S TART
OFF
ENS P2
LEVEL
ENERGY
S AVING OK
12:00 73F
12:00 73F
2F
Select the value to
be set for ignition
temperature
Press the SELECT MENU key and then select the temperature set point 2,
4 or 6 °F (1, 2 or 3 °C) or disable the function by selecting OFF.
Conrm by pressing the SET key.
1
1
1
1
1
ENERGY
S AVING
S TOP
S TART
OFF
ENS P2
LEVEL
ENERGY
S AVING OK
12:00 73F
12:00 73F
2F
After conrmation using the SET key, the readout FUNTION ENABLED is
displayed and the readout ENS (ENERGY SAVING) appears on the main
display.
1
1
1
1
1
ENERGY
S AVING
S TOP
S TART
OFF
ENS P2
LEVEL
ENERGY
S AVING OK
12:00 73F
12:00 73F
2F
Upon reaching the temperature set in the STOP function, the stove starts
the shutdown stage.
The readout ENERGY SAVING OK appears on the display.
1
1
1
1
1
ENERGY
S AVING
S TOP
S TART
OFF
ENS P2
LEVEL
ENERGY
S AVING OK
12:00 73F
12:00 73F
2F
DT2040124-00
H07028100/DT2000970 – 01
45
English
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Piazzetta P960 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Piazzetta P960 in the language / languages: English as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info