698638

Phonocar VM489 Manual

8
Zoom out
Zoom in
Previous page
1/16
Next page
8
1) Camera image.
2) Recordings made.
3) W-FI Red = camera in connection.
WI-FI Green = connected camera.
4) Return to the previous screen.
5) Delete records.
6) HOTSPOT SETTING: It is possible
to customize USER and PASSWORD
4
5
GB
WARNING: The Apple device must be renamed. Enter your smartphone settings then select “General” and then
“Info”. Press “name” and change the name to: Rear Wifi Camera. In the settings select PERSONAL HOTSPOT,
activate it and enter the wi-fi password: 12345678.
Then, you can customize USER and PASSWORD, through
the HOTSPOT SETTING.
Note: Remember to save your SSID and PASSWORD settings because you cannot reset the system (RESET)
or change the settings without re-entering the previously stored SSID and PASSWORD.
APP iOS
APP STORE: “PHONOCAR WI FI REAR CAMERA”
EVENT  HOTSPOT CAMERA FUNCTION
 Timer Activation and switch on of the camera router  
Opening PHONOCAR APP  The smartphone connects to the camera.
 The WI-FI function is deactivated (if it was active).
Ignition-key activation If the connection is not yet active, the device
continues the research. If, instead, it is already connected it waits for
the engagement of the reverse gear (the APP must ALWAYS remain
open to receive images. )
Reverse gear Engagement The camera sends the image to smartphone. 
 At the same time static guidelines will be displayed.
PHONOCAR APP in background  The smartphone keeps HOTSPOT active but to receive the rear image,
it is necessary to reopen the APP, when the reverse gear is re-activated.
PHONOCAR APP closed  By completely closing the APP on your smartphone, it
continues to remain connected via HOTSPOT, and when the APP
reopens the smartphone will be ready to receive the images.
PHONOCAR APP reopened The smartphone remains in “ready to reverse gear”.
The WI-FI function is deactivated (if activated).
OUT FROM THE VEHICLE  The system remains on for 60 minutes after having closed the
ignition-key , so as to maintain the possibility to connect your
smartphone if it is within range of the camera (approx. 10 meters).
In this way, activation times of the system are reduced.
After 60 minutes, the system switches off.
WI-FI AND HOTSPOT CONNECTIONS
The HOTSPOT function cannot be used at the same time as the WI-FI because the smartphone is supposed to
create the connection with the camera. It will therefore not be possible to connect to any Access Point, Router or
other WI-FI device during the use of the rear camera, but 3G for data transmission will remain in operation.
APP APPLE: PHONOCAR WI-FI REAR CAMERA
1
2
3
6
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Phonocar VM489 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Phonocar VM489 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info