698652
5
Zoom out
Zoom in
Previous page
1/20
Next page
4
5
Am Ende der Programmierung angelangt, 3 Sekunden die Taste gedrückt halten, um den Einstell-Modus zu
verlassen. Die einzustellenden Alarm-Grenzwerte für Tief- und Hoch-Druck müssen die Spanne von 20% - 25%,
unterhalb oder oberhalb der angegebenen Herstellerwerte, einhalten. (siehe Seite 17-18)
Falls, innerhalb von 3 Minuten, keine Funktionen durchgeführt werden, geht das Display of den Kontroll-Modus
zurück.
Lorsque la programmation est terminée, faire pression sur la touche
pendant trois secondes pour sortir du menu
des réglages. Les niveaux d’alarme de la pression basse et haute doivent être réglés à une valeur inférieure ou
supérieure d’environ 20%-25% par rapport à la valeur indiquée par le constructeur (voir pag. 17-18)
Si pendant au moins trois minutes aucune opération nest eectuée, l’acheur retournera en modalité de contrôle.
SOSTITUZIONE SENSORE / REPLACING SENSOR
REMPLACEMENT SENSEUR / SENSOR - AUSTAUSCH
(COD. VM372)
Premere il tasto per cinque volte, il display emetterà un beep.
Press key
ve times: Display will emit a “beep”-sound.
Appuyer la touche
5 fois, l’acheur fera un “beep” .
Taste
5 Mal drücken: das Display wird einen “Piep”-Ton abgeben.
Premere i tasti
per selezionare il pneumatico da programmare.
Press the keys
to select the tyre to be programmed.
Appuyer les touches
pour sélectionner le pneu à programmer.
Die Tasten
drücken, um den zu programmierenden Reifen zu wählen.
Quando il nuovo valore verrà visualizzato, premere il tasto
per memorizzare.
When the new Value will be visualized, press key
to memorize.
Lorsque la nouvelle valeur sera visible, appuyer la touche
pour mémoriser.
Sobald der neue Wert ausgewiesen wird, Taste
drücken, um zu bestätigen.
Premere il tasto
o premere per programmare un altro sensore.
Press key
or press to programme another sensor.
Appuyer la touche
ou appuyer pour programmer un autre senseur.
Taste drücken oder
drücken, um einen anderen Sensor zu
programmieren.
Terminata la programmazione, per confermare, premere il tasto
per tre secondi.
When programming has been terminated, press key
for 3 seconds, to conrm.
Terminée la programmation, appuyer la touche
pendant 3 secondes pour conrmer.
Sobald die Programmierung beendet ist, Taste
3 Sekunden lang drücken, um zu bestätigen.
Sostituire il sensore sgonando parzialmente il pneumatico.
Replace the sensor by partially deating the tyre.
Remplacer le senseur en dégonant partiellement le pneu.
Sensor austauschen. Dabei Luft teilweise aus dem Reifen heraus lassen.
Procedere come segue: - Proceed as follows: - Suivre la procédure ci-dessous: - Vorgehensweise:
vales stated by the Manufacturer (see page 17-18)
If no operations are eected within 3 minutes, the Display will return to the monitoring-mode.
IT GB
FR D
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Phonocar VM361 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Phonocar VM361 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info