• 2 keys (+ 2 spare keys) for the technical zone of cells management
• Power supply
• Alarm opening tool.
• User manual.
3. Preparation.
Please follow this manual before launching
All the keys, tools and network cable are installed in the lower compartment of SLS. By shipping , the key for the lower compartment is situated on the
top of SLS in the original packing.
1. Take the power supply unit out of the lower compartment. Close the compartment with the key (after that key should be passed to a person
in charge).
2. Connect the network cable of the power supply unit to the connector situated on the back wall of SLS
3. The LCD-display will be activated. THE LCS-display shows the words «System initialization» All the free cells open.
4. Message on the screen «Number of cells -24. Free cells - 24»*.
*Number of free cells is indicated.
5. The SLS will work in standby mode – the message on the display: «Enter the number of cell and press #». SLS is ready to work.
Note: free cells are always open
4. User manual.
Putting objects in cell:
• The SLS has to work in standby mode - the message on the display:
«Enter the number of cell and press #»
• Put object in cell.
• Close the door of the cell. The lock blocks the cell;
• The number of closed cell will be shown on the display;
• System waits for entering the PIN-code;
• Enter the PIN-code on the keypad (4 numbers) and press «#». If there is
no errors, the display will show the message – «Accepted». If there is an
error, the display will show the message – «Re-enter» and the input eld
will be cleared
• Memorize the entered PIN-code
Note:
The wrong number can be cleared with «*» (Recommendation: clear the
PIN-code and re-start).
The PIN-code must be entered in 10 sec.
If the PIN-code is not entered, the cell opens. The message on screen – «OPENED».
The standby mode is on.
Withdrawal of objects from the cell:
Note:
All the occupied cells are closed. Management unit ensures the closing of doors.
1. The SLS has to work in standby mode - the message on the display: «Enter the number of cell and press «#»
• Enter the number of cell (2 or 3 digits) and press «#».
Note:
If the cell is open, the following message appears «Error – Free cell».
• Enter PIN-Code (4 numbers) and press «#». If errors not found – cell opens.
If the entered PIN-Code is not the PIN-Code of the cell on the display appears the message «Error – wrong code».
If the user took the object from the cell and closed it, the display will show an invitation to enter the new PIN-Code. To reset it press «*»,
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Phoenix SL0024 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Phoenix SL0024 in the language / languages: English as an attachment in your email.
The manual is 0,83 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
