492016
7
Zoom out
Zoom in
Previous page
1/12
Next page
Manuel de l’amplicateur
© 2010 Phoenix Gold • www.phoenixgold.com
Spécifications
CARACTÉRISTIQUES TECHNIQUES MONOBLOC
Réponse en fréquence : ± 1 dB de 20 Hz à 300Hz
Rapport signal/bruit : >90dB
Filtres passifs subsoniques et passe-bas: 24dB par octave
Plage du ltre passif passe-bas: 30Hz à 300Hz
Plage du ltre passif subsonique: 10Hz à 55Hz
Amplication des basses à 45 Hz : 0 à +18dB
Gamme d’entrée de niveau faible: 200 millivolts à 8 volts
Charge minimale recommandée: 1 ohm
Efcacité type: 80%
Taux d’amortissement: Supérieur à 200
CARACTÉRISTIQUES DEUX ET QUATRE CANAUX
Réponse en fréquence: ± 1dB de 20Hz à 20kHz
Rapport signal/bruit: >110dB
Filtres passifs passe-haut et passe-bas: 18dB par octave
Plage du ltre passif passe-bas: 40Hz à 400Hz
Plage du ltre passif passe-haut: 20Hz à 400Hz
Amplication des basses à 45: 0 à +18dB
Gamme d’entrée de niveau faible: 200 millivolts à 8 volts
Charge minimale recommandée: 4 ohms en dérivation ou 2 ohms en stéréo
Efcacité type:
50%
Taux d’amortissement: Supérieur à 200
Ti600.4
Puissance Dynamique 14.4Vdc >1% THD 100 x 4 @ 4 ohm Stereo
150 x 4 @ 2 ohm Stereo
300 x 2 @ 4 ohm Bridged
Puissance RMS 14.4Vdc ≤1% THD 90 x 4 @ 4 ohm Stereo
120 x 4 @ 2 ohm Stereo
240 x 2 @ 4 ohm Bridged
Taille du fusible: 80A
Taille du l d’alimentation/de masse: calibre 4
Dimensions: 16,85 po L x 9,8 po W x 2,5 po H
428mm x 252mm x 62mm
Ti800.4
Puissance Dynamique 14.4Vdc >1% THD 125 x 4 @ 4 ohm Stereo
200 x 4 @ 2 ohm Stereo
400 x 2 @ 4 ohm Bridged
Puissance RMS 14.4Vdc ≤1% THD 115 x 4 @ 4 ohm Stereo
150 x 4 @ 2 ohm Stereo
300 x 2 @ 4 ohm Bridged
Taille du fusible: 100A
Taille du l d’alimentation/de masse: calibre 4
Dimensions: 20,4 po L x 9,8 po W x 2,5 po H
518mm x 252mm x 62mm
Ti1500.1
Puissance Dynamique 14.4Vdc >1% THD 1100 x 1 @ 2 ohm
1500 x 1 @ 1 ohm
Puissance RMS 14.4Vdc ≤ 1% THD 900 x 1 @ 2 ohm
1250 x 1 @ 1 ohm
Taille de fusible: 100A
Taille du l d’alimentation/de masse: calibre 4
Dimensions: 16,85 po L x 9,8po W x 2,5 po H
428mm x 252mm x 62mm
Ti2500.1
Puissance Dynamique 14.4Vdc >1% THD 1500 x 1 @ 2 ohm
2500 x 1 @ 1 ohm
Puissance RMS 14.4Vdc ≤ 1% THD 1100 x 1 @ 2 ohm
1650 x 1 @ 1 ohm
Taille de fusible: 200A
Taille du l d’alimentation/de masse: calibre 1/0
Dimensions: 20,4 po L x 9,8 po W x 2,5 po H
518mm x 252mm x 62mm
phoenix gold ti amp manual.indd 7 3/2/10 11:20:43 AM
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Phoenix Gold Ti600.4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Phoenix Gold Ti600.4 in the language / languages: English as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info