736943
10
Zoom out
Zoom in
Previous page
1/13
Next page
10/13
5. Power supply
5.1 Changing the battery
Power is supplied by a 9V-block battery (Caution: only use alkaline or lithium batteries). The battery
compartment is accessible when the door is open and is visibly installed in the door frame or
directly on the interior of the door, depending upon the type of safe (when changing the battery,
pay attention to correct battery polarity). It is necessary to change the battery if a long signal
sounds before the short tone after the lock opens. The battery must be changed as soon as
possible, because sure operation is no longer guaranteed after approximately ten further
activations.
5.2 Emergency power
If the battery is completely discharged and the safe is closed, proceed as follows.
1. Remove the keypad from the bracket by carefully prying with a flat, dull screwdriver on the
edge of the keypad between 4 and 7, above the LED and between 6 and 9
2. Pull the keypad out approximately 5 cm with both cables and lift it.
3. Clip the new 9V battery into the two poles (large to small, small to large) on the back. Here,
provide support with your fingers on the front of the keypad between 0 and 9.
4. Now, proceed in accordance with the operating instructions, item Opening, and open the
safe.
5. Open the battery compartment on the inside, carefully remove the new battery from the
back of the keypad, and exchange it for the dead battery.
6. Push the keypad cables carefully back into the door and snap the keypad back into the
bracket.
Prying the keypad from the bracket on the sides will leave marks on the bracket. This is
intentional and protects you against illegal manipulation of the lock by unauthorized third parties.
If necessary, you can order a new bracket from the manufacturer.
DS4650 Millenium Duplex Instructions
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Phoenix DS4651 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Phoenix DS4651 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info