Manual Phoenix DS2503 (page 2 of 8) (English, German, French, Italian, Spanish)

737006

Zoom out

Zoom in

1/8

Ph Sf Cpny r eac n s gurte

DS2500 BASE FIXING INSTRUCTIONS

MODEL A B C D

DS2501 123 143 149 131

DS2502 123 143 149 131

DS2503 180 180 220 180

CHOOSING A PLACE TO INSTALL YOUR SAFE

1. Lookforaplacethatdoesnotrestrictaccessandtheswingofthe

door.

2. Ensurethattheoorislevel.

3. Forbestresultsaconcreteoorispreferable.

DRILLING & BOLTING

1. Manoeuvrethesafeintotherequiredposition.Nowwiththepencil

marktheooraroundthesafe.

2. Openthesafedoor.

3. Usingthepencil,markthepositionsontheoorfordrillingthrough

holes in the base of the safe.

4. Nowmovethesafetooneside,givingyouaccesstothemarkingson

theoor.

5. Beforeusingthedrillbit.Withtherulermeasure60mmfromthetipof

thebitandputapieceofadhesivetapearoundthebittoensureyou

do not drill too deep.

6. Drillthe12mmholesintheooruntilyoureachyour60mmmarker.

7. Cleantheooraroundtheholes.

8. There are three parts to your bolts:

a.Acoachscrew

b.Aplasticexpandingsleeve

c.Asteelwasher

9. Inserttheplasticexpandingsleevesintothedrilledholes.

10. Place the safe back into position, insert the coach screws, including

thewashers,throughthebaseofthesafe,intotheoorandtighten

until you can not tighten them any further.

YOUR SAFE IS NOW BASE FIXED.

SECURING THE DATABOX INTO THE SAFE

Usingthe2adhesivestripsprovided,attachthesetothebackofthe

Databox.Positiontheboxintothebottomofthesafe,axingittotheback

wall.

INSÉREZ 4 PILES AAA COMME PRÉCISÉ SUR LE SCHÉMA

1. PREMIÈRE OUVERTURE AVEC LE CODE USINE

1. Appuyezsurlebouton“C”

2. Entrezlecodeusine«123456«

3. Appuyezsurlebouton#,unemélodierésonneraetl’écranconrmera

OPEnd

4. Tournezlapoignéedanslesensdesaiguillesd’unemontreetouvrez

laporteenmêmetempsquelamélodieretentit.

Attention

Siuncodeincorrectestentré,l’écranachera“Error”etunecourteto-

nalitéd’avertissementretentira.Siuncodeincorrectestentrécinqfois,la

serrures’arrêteradefonctionnerpendantcinqminutes,un’avertissement

sonoreretentiraetl’écranacheradELAY.

C > 1 > 2 > 3 > 4 > 5 > 6 > #

2. RÉGLAGE D’UN NOUVEAU CODE PERSONNEL.

Ilestconseilléderéglerunnouveaucodeaveclaporteouverteetdevéri-

erlenouveaucodeavantdefermerlaporte.

1. Appuyezsurlebouton#

2. Entrezlecodeactuel

3. Appuyezsurlebouton#

4. Entrezunnouveaucodepersonnelde4à16chires

5. Appuyezsurlebouton#

Par exemple:

Silecodeactuelest123456etquelenouveaucodedequatrechires

choisiest4242,appuyezsurlesboutonscommeci-dessous.

EnTErds’acherasurl’écranetunecourtemélodiede3secondes

retentirapourconrmerlechangementdunouveaucode4242

# > 1 2 3 4 5 6 > # > 4 2 4 2 > #

3. RÉGLAGE DE LA FONCTION CONTRÔLE DOUBLE OÙ

DEUX OPÉRATEURS AVEC DES CODES PERSONNELS

DIFFÉRENTS SONT NÉCESSAIRES POUR OUVRIR LA

SERRURE.

Aveclaporteouverteréglezledeuxièmecode

1. Appuyezsurlebouton“M”quisetrouveàl’arrièredelaporte

2. Appuyezsurlebouton«2»

3. Appuyezsurlebouton#

4. Entrezundeuxièmecodepersonnel

5. Appuyezsurlebouton#

EnTErds’acherasurl’écranetunecourtemélodiede3secondes

retentirapourconrmerlasaisiedudeuxièmecode.

Par exemple:

Silecodeactuelest4242etqueledeuxièmenouveaucodeàquatre

chireschoisiest6789,appuyezsurlesboutonscommemontré

ci-dessous.EnTErds’acherasurl’écransuivid’unecourtemélodiepour

conrmerlabonnesaisieducode

M > 2 > # > 6 7 8 9 > #

4. POUR ACTIVER LE CONTRÔLE DOUBLE

1. Appuyezsurleboutonmémoire“m”situéàl’arrièredelaporte.

2. Appuyezsurlebouton«9»

3. Appuyezsurlebouton«#»

M > 9 > #

FRENCH

ClavieretécranLED

BoutonC

Boutonde

démarrage

Bouton#

Position des piles

sousleclavier

2.Appuyezsurlerepèred’ouverturedu

clavierpourrelâcherlemécanismede

retenueetfairepivoterleclavierversle

hautetverslagauchepourouvrir.

1.Retirezlavis

retenantleclavier

Partie

supérieure

Partie

inférieure

Ouvertureducompartiment

des piles

OPERATING INSTRUCTIONS FOR DS2500E

& GUARANTEE REGISTRATION

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Phoenix DS2503 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Phoenix DS2503 Manual

Product: