811384

Philips XU7100 - Robot Manual

7
Zoom out
Zoom in
Previous page
1/1048
Next page
9
English
Note: Keep 0.5 meters of space on the sides of the station and 1.5 meters
in front of the station.
2Connect the station to the power supply.
3Make sure that the remaining part of the power cable is well concealed
behind the station so that the robot cannot drive over it.
Note: For model XU7100 only, place the dust bag in the dust bag
compartment of the station.
Charging the robot
1Turn the robot to its correct position and put the robot on the floor in front of
the station. The water tank should be facing away from the station.
-Model XU7100 -Model XU7000
- -
2Make sure that the station is connected to the wall socket.
3Press and hold the on/off button for 3 seconds to switch on the robot.
4Press the home button. The robot drives to the correct position in the station.
-Model XU7100 -Model XU7000
-
2
1
-
2
1
5Wait until the robot is fully charged.
If the battery is empty, the robot will not drive itself to the correct position. In
this case, follow the next steps:
1Turn the robot to its correct position and put the robot on the floor in front of
the station.
2Align the wheels with the tracks on the station (for model XU7100) or align
the charge contacts of the robot with the charge terminals of the station (for
model XU7000).
3Push the robot in and let the wheels go in the tracks (for model XU7100) or
put the robot with the charge contacts on the charge terminals of the station
(for model XU7000).
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips XU7100 - Robot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips XU7100 - Robot in the language / languages: All languages as an attachment in your email.

The manual is 12.88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info