811389
5
Zoom out
Zoom in
Previous page
1/886
Next page
8English
11 Charging contact points (robot)
12 Water tank
13 Release button of the water tank
14 Brush cover
15 Main brush
16 Power on/off switch
17 Front caster wheel
18 Sensor to guide the robot back to the station (3x)
19 Anti-drop sensor (3x)
20 Side brush
21 Main wheels
22 Mop pad holder
23 Washable mop pad (2x)
24 Dust bag (2x)
25 Canister lid
26 Dust bag compartment
27 Auto-Empty station
28 Indicator light
29 Charging contact points (station)
30 Auto-Empty inlet
31 Power cord socket
32 Placemat
33 Brush cleaning tool
Before first use
1Take the appliance out of the box and remove all packaging.
2Remove the protection covers.
3If you see any sign of visible damage, go to www.philips.com/support or
contact the Consumer Care Center in your country.
Preparing for use
Tips for choosing the best location for installing the station:
-Do not place the station in bright sunlight or under furniture. This will block
the infrared signal that helps the robot find its way back to the station.
-Install the station on a level surface against a wall.
-Install the station on a hard floor.
-Do not place the station near stairs or a heating source (radiator).
-Install in a location with good WiFi coverage.
Install the station
0.5m
0.5m
1.5m
1Install the station within the correct dimensions for placement.
Note: Keep 0.5 meters of space on the sides of the station and 1.5 meters
in front of the station.
2Connect the station to the power supply.
3Make sure that the remaining part of the power cable is well concealed
behind the station so that the robot cannot drive over it.
4Place the dust bag in the dust bag compartment of the station.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips XU3110 - Robot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips XU3110 - Robot in the language / languages: All languages as an attachment in your email.

The manual is 14.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info