581845
37
Zoom out
Zoom in
Previous page
1/50
Next page
35EN
2 Enter the call barring PIN/passcode. The
default PIN is 0000. Then press [OK] to
conrm.
3 Select [Change PIN], then press [OK] to
conrm.
4 Enter the old barring PIN/passcode. The
default PIN is 0000. Then press [OK] to
conrm.
5 Enter the new PIN/passcode, then press
[OK] to conrm.
6 Enter the new PIN/passcode again, then
press [Save] to conrm.
» The setting is saved.
Call blocking
There are two ways to block incoming calls:
block anonymous calls;
create a blacklist.
Note
Make sure you have subscribed to the caller ID service
before you use this feature.
Block anonymous calls
You can block calls without identity in order
to reduce unwanted calls, like calls from
telemarketers.
1 Select [Menu] > [Services] > [Call block],
then press [OK] to conrm.
2 Enter the call blocking PIN/passcode. The
default PIN is 0000. Then press [OK] to
conrm.
3 Select [Anonymous call] > [On]/[Off] to
activate/deactivate call blocking, then press
[OK] to conrm.
» The setting is saved.
Blacklist
You can put numbers into the blacklist to
block incoming calls from certain undesirable
numbers. You can create 4 sets of numbers with
24 digits at maximum for each set of numbers.
When there is an incoming call that starts with
one of these 4 sets of numbers, the ringer will
be muted.
Note
The contact's name in phonebook will not be displayed
if this contact's number matches the record saved in
the blacklist.
Create a blacklist
1 Select [Menu] > [Services] > [Call block],
then press [OK] to conrm.
2 Enter the call blocking PIN/passcode. The
default PIN is 0000. Then press [OK] to
conrm.
3 Select [Blacklist] > [Block number] if
you have activated call blocking, enter the
number, then press [OK] to conrm.
» The setting is saved.
Activate/deactivate the blacklist
1 Select [Menu] > [Services] > [Call block],
then press [OK] to conrm.
2 Enter the call blocking PIN/passcode. The
default PIN is 0000. Then press [OK] to
conrm.
3 Select [Blacklist] > [Block mode] >
[On]/[Off], then press [OK] to conrm.
» The setting is saved.
Change the call blocking PIN/
passcode
1 Select [Menu] > [Services] > [Call block],
then press [OK] to conrm.
2 Enter the call blocking PIN/passcode. The
default PIN is 0000. Then press [OK] to
conrm.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips XL495 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips XL495 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips XL495

Philips XL495 Quick start guide - German - 5 pages

Philips XL495 User Manual - German - 56 pages

Philips XL495 Quick start guide - Dutch - 5 pages

Philips XL495 User Manual - Dutch - 52 pages

Philips XL495 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info