160293
48
Zoom out
Zoom in
Previous page
1/53
Next page
48
English
12.1 Firmware upgrade
12.1.1 Upgrading firmware
The supplied PC Installer CD Wireless Audio
Device Manager (WADM) helps you get the
upgrades for WACS4500 Center and Station.
1 Register your Philips Wireless Music Center with
www.club.philips.com
2 Download the firmware upgrade files and store
them on your PC
3 Place Center and Station(s) side by side on a
flat and firm surface
4 Connect Center and Station(s) to power
supply
HD screen appears on Center
HD screen appears on Station(s) when the
Station is connected to Center
5 Connect Center to your PC via the supplied
ethernet cable.
6 Install and lauch WADM (see Connect to your
PC section B)
7 Click to enter the Firmware upgrade sub-menu
8 As prompted, click Browse and indicate the
location where you kept the firmware upgrade
files on PC
9 Click Apply to start upgrading firmware
On Philips Wireless Music Center:
The display shows Updating firmware,
please wait...
Center will reboot itself during the
installation process
When Center returns to HD screen, the
installation is completed
Then, on Philips Wireless Music Station:
Installation starts automatically
When Station returns to HD screen, the
installation is completed
IMPORTANT!
On Philips Wireless Music Center/Station:
- Never interrupt the firmware upgrading
before its completion.
- Before finishing the installation, never
operate other functions.
12.1.2 Restoring previous firmware
After the Center’s firmware is upgraded, you can
restore it to its previous version as desired.
1 On Center, select HD mode and then, select
Restore firmware
a. Press MENU to enter the MENU screen
b. Press the navigation controls 3 or 4 and 2 to
enter Settings, Firmware and Restore
firmware one by one.
2 Press 2 to select Yes
After upgrading or restoring the Center’s
firmware, you need to re-establish the Wi-Fi
connection between Center and Stations.
12.1.3 Re-establish Wi-Fi network of
Center and Stations
1 On Center, select HD mode and then enter
Installation Mode
a. Press MENU to enter the MENU screen
b. Press the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu
c. Press 3 or 4 and 2 to select Add New
Station
Searching for Stations starts
2 On Stations, enter Installation Mode
a. Remove the power plug of Stations and then,
connect them to the power supply again
Connecting to Center appears
b. On the remote control, press MENU to
enter the selection screen of Installation
Mode and Select Server
c. Press the navigation controls 3 or 4 and 2 to
enter Installation Mode
The Stations start to connect Center
3 Press STOPÇ on Ce;nter when all the Stations
are found
12. Firmware Upgrade
pg001-pg051_WACS4500_Eng 2006.11.29 15:49 Page 48
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips wacs4500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips wacs4500 in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info