160293
43
Zoom out
Zoom in
Previous page
1/53
Next page
43
English
4 If you are using a DHCP*-enabled Access Point
select Automatic
*DHCP stands for Dynamic Host Configuration
Protocol. It is a protocol for assigning dynamic IP
addresses to devices on a network.
If there is no DHCP
Select Static and assign an IP address and subnet
mask as prompted using the alphanumeric keys
(see Preparation: Using Alphanumeric Keys).
5 As prompted, select Yes to apply the settings
The Center is connected to the external
wired network
On the display, the icon is changed to
9.3.2 Network setting on Station
1 Check that the device is switched on and the
firewall (if available) is switched off
2 Connect the supplied Ethernet cable to the
Ethernet ports on the device and the Station
3 On the Station, search for networks
a. Press MENU to enter the menu screen
b. Press the navigation controls 3 or 4 and 2
and 2 to enter Settings, followed by Network
and Wired
c. Press 2 to continue.
4 Follow Steps 4 to 5 in the above Network setting
On Center
5 As prompted, select Yes to apply the settings
The Station is connected to the external
wired network
On the display, the icon is changed to
Helpful hint:
–You can connect the Center or Station directly to
your PC using the supplied Ethernet cable and the
Wireless Audio Device Manager (WADM) in the by-
packed PC Suite CD. For details, see the manual
Connect to your PC.
ETHERNET
Wireless Base Station 11g T
Wireless Base Station 11g T
rue T
rue T
urbo
urbo
Wireless
Wireless
Modem PC
Modem PC
Power
Power
ETHERNET
Wireless Base Station 11g T
Wireless Base Station 11g T
rue T
rue T
urbo
urbo
Wireless
Wireless
Modem PC
Modem PC
Power
Power
ETHERNET
Internet
ETHERNET
Wireless Base Station 11g T
Wireless Base Station 11g T
rue T
rue T
urbo
urbo
Wireless
Wireless
Modem PC
Modem PC
Power
Power
Internet
9. Network setting
PC (with WADM installed)
for illustration only
External wired network
External wired network
Access Point
PC
(UPnP device)
DSL modem
for illustration only
External wired network
Access Point
PC
(UPnP device)
DSL modem
for illustration only
pg001-pg051_WACS4500_Eng 2006.11.29 15:49 Page 43
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips wacs4500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips wacs4500 in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info