462271
29
Zoom out
Zoom in
Previous page
1/39
Next page
30
Timer Recording
To record while youre away, follow step
1 10 below. For each programme you
set, the VCR will turn on, start recording,
and turn off automatically. You can store
up to 8 programmes.
Make sure....
The clock is set to the correct time
before setting timer recording.
A cassette is inserted in the VCR and
the record tab of the cassette must
not be removed.
The remote control operation mode
is set correctly for operating your
target component.
Press VCR to operate the VCR.
Press TV to operate the TV.
FOR EACH STEP BELOW, YOU
NEED TO FINISH WITHIN 60
SECONDS; OTHERWISE,
PROGRAMMING WILL HAVE TO
BE RESTARTED FROM STEP 1.
1Select Timer Mode
1
Press VCR.
2 Press
TIMER.
The Timer
Recording
menu app-
ears.
2Select Programme mode
1
Press
5 or
to select
QUICK -
PROG-
RAMM-
ING t
hen
press
OK/
STATUS
.
The Quick Programming menu
appears.
If you have already made 8
programmes, ALL PROGRAMS IN
USE appears and goes back to the
Timer Recording menu. If this
happens, delete unwanted programmes.
(P.20)
3Select Channel Position
Press CH 5
or to
enter the TV
channel.
Holding
down CH 5
or rapidly
scans throu-
gh the chan-
nels.
A
DVANCED
O
PERATIONS
(CONTINUED)
4Select Start Time
Press START
+ or (Num-
ber button 1
or 4).
Each time
you press
the button,
the set
time changes
by 1-minute intervals. If you hold the
button, the set time changes by 30-minute
intervals.
5Select Stop Time
Press STOP
+ or
(Number
button 2 or 5).
Each time
you press
the button,
the set time
changes by 1
minute intervals. If you hold the button,
the set time changes by 30-minute
intervals.
6Select Tape Speed
Press ALT/
SPEED.
Each time
you press
the button,
the tape
speed alter-
nates
between
SP and LP.
7Set VPS/PDC Mode
Press VPS/PDC (Number button 7) to
set VPS/PDC to ON or OFF.
(VPS/PDC Recording on page 32).
8Select Start Date
Press DATE +
or (Number
button 3 or 6).
The year and
day of the
week is dis-
played auto-
matically.
ONE TIME PROGRAM
PROGRAM 1
TV PROG +/- - -
START+/- - -:- -
STOP +/- - -:- -
REC SPEED SP
VPS/PDC OFF
DATE +/- - -/- -/- -
DAILY: 8 WEEKLY: 9
CONFIRM: OK
END : TIMER
ONE TIME PROGRAM
PROGRAM 1
TV PROG +/- 12
START+/- - -:- -
STOP +/- - -:- -
REC SPEED SP
VPS/PDC OFF
DATE +/- - -/- -/- -
DAILY: 8 WEEKLY: 9
CONFIRM: OK
END : TIMER
ONE TIME PROGRAM
PROGRAM 1
TV PROG +/- 12
START+/- 20:00
STOP +/- - -:- -
REC SPEED SP
VPS/PDC OFF
DATE +/- - -/- -/- -
DAILY: 8 WEEKLY: 9
CONFIRM: OK
END : TIMER
ONE TIME PROGRAM
PROGRAM 1
TV PROG +/- 12
START+/- 20:00
STOP +/- 22:00
REC SPEED SP
VPS/PDC OFF
DATE +/- - -/- -/- -
DAILY: 8 WEEKLY: 9
CONFIRM: OK
END : TIMER
ONE TIME PROGRAM
PROGRAM 1
TV PROG +/- 12
START+/- 20:00
STOP +/- 22:00
REC SPEED LP
VPS/PDC OFF
DATE +/- - -/- -/- -
DAILY: 8 WEEKLY: 9
CONFIRM: OK
END : TIMER
ONE TIME PROGRAM
PROGRAM 1
TV PROG +/- 12
START+/- 20:00
STOP +/- 22:00
REC SPEED LP
VPS/PDC ON
DATE +/- 14/07/00
FRIDAY
DAILY: 8 WEEKLY: 9
CONFIRM: OK
END : TIMER
9Confirm Programme
Press OK/STATUS or TIMER.
PROGRAM WAS COMPLETED
appears on the TV screen.
After 5 seconds, the above message
disappears, and the normal TV picture
resumes. The
(Timer) indicator
lights up on the display.
If PROGRAM NOT COMPLETED
appears, try again from step 1.
If PROGRAM OVERLAPPED
appears, the timer recording you just
programmed overlaps another timer
recording. The Program Review screen
will appear with a magenta line blinking.
To change any item on the overlapping
programs, see page 31.
If you want to store other
programmes, repeat steps 1 to 9.
10 Finish Settings
Press POWER (or STANDBY/ON on
the front panel) to turn off the VCR.
The VCR must be turned off for a timer
recording to take place. If you forget to
turn off the VCR, PLEASE TURN
OFF VCR FOR TIMER
RECORDING flashes on your TV
screen two minutes before a timer
recording starts. To remove the
message, press the CLEAR button.
If you want to record the same
programme daily, press DAILY
(Number button 8) during step 3
through 8. (Press the button again to
cancel).
The VCR will record a TV programme
every day (Monday through Friday) at
the same time and length (Daily
Recording).
If you want to record the same
programme weekly, press WEEKLY
(Number button 9) during step 3
through 8. (Press the button again to
cancel).
The VCR will record a TV programme
once a week at the same day, time and
length (Weekly Recording).
After a timer recording has
taken place
Press POWER (or STANDBY/ON on
the front panel) to turn on the VCR.
You can operate your VCR normally.
To stop a started timer recording
Press POWER (or STANDBY/ON on
the front panel).
Recording stops and the VCR turns off.
If it is a Daily or Weekly Recording,
future recordings will be carried out as
programmed.
To record from external line input, press
CH 5 or until A/V1 REAR, A/V2
REAR, A/V FRONT, OR
S-2 VIDEO appears.
\ SHOWVIEW
QUICK PROGRAMMING
PROGRAM REVIEW
SELECT : 5∞ CONFIRM : OK
END : TIMER
Untitled-2 16/08/2000, 15:3830
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips VR1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips VR1100 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info