462271
15
Zoom out
Zoom in
Previous page
1/39
Next page
16
Power Save Mode
You can reduce the power consumption
while the VCR is turned off.
1Select VCR Set Up Screen
1 Press VCR.
2 Press MENU.
3 Press 5 or to select VCR SET
UP, then press OK/STATUS.
2Set Power Save Mode
Press 5 or to select POWER
SAVE then press 4 to set to ON.
3Finish Setting
Press MENU.
During Power Save, the display window
will be turned off.
The Just Clock function (
P. 20) does not
work while the Power Save mode is
engaged.
While the VCR is in the Power Save mode,
the picture may be distorted momentarily
when you turn on/off the VCR.
Power Save does not work when ...
... the VCR is in the Timer mode.
... the VCR's power is turned off after
timer-recording (or One Touch
Recording).
... the Auto Satellite Prog Recording mode
is engaged (
P. 28).
... A/V2 SELECT is set to
DECODER or SAT (
P. 27).
Language Setting
You can also change the language
manually.
1Select Language Set Screen
1 Press VCR.
2 Press MENU.
3 Press 5 or to select AUTO
TUNER SET UP then press
OK/STATUS.
The Country Set menu appears.
4 Press 5 or to select your countrys
name, then press OK/STATUS.
2Set Language
Press 5 or to select the language,
then press MENU to exit.
S
ETTING
U
P
(CONTINUED)
Menu Operations
Before operating the VCR, be
familiar with the menu operations
first because most of the features
built into the VCR can be available
only on the menus.
1 Press VCR on the remote control.
2 Press
MENU
to
display
the
main
menu
screen.
3 Press 5 or (or PROGRAMME
5/ on the front panel) to select a
desired feature on the menu, then
press OK/STATUS.
4 When you select a feature, go to
the section in this manual and
follow the instructions described
there.
To go back to the previous menu
screen, press REW 2.
To exit from the menu operations,
press MENU.
Note:
Menu operating buttons function only
when a menu is on the TV screen. When
no menus is on the TV screen, they
function differently.
Operations hereafter are described
using the buttons on the remote
control unless mentioned otherwise.
The buttons on the front panel having
the same (or nearly same) name or
same (or nearly same) mark function
exactly the same as those on the remote
control.
IMPORTANT
The setup and adjustment procedures
explained hereafter are written under
the following conditions:
You have turned on the TV and
selected the video channel (or
external video input).
You have turned on the VCR.
\VCR SET UP
AUTO TUNER SET UP
MANUAL TUNER SET UP
OUTPUT/INPUT SETUPAL E
INITIAL SET UP
SELECT : 5∞ CONFIRM : OK
END : MENU
PR: channel positions
CH: channel numbers
ID: station names (P.19)
The blueback screen and the programme
currently being broadcasted by the blinking
station appear alternately for 8 seconds each.
To view the next page, use the 5∞ 23 button
on the remote control.
The stations located in the selected country
appear at the top of the list.
The Guide Programme numbers will also be set
automatically.
3Finish Setting
Press MENU to exit the menu
operations.
Preset Download
When you want to perform Preset
Download after setting channels,
perform the following procedure.
For the detail of Preset Download, see
page 14.
1Perform Preset Download
1 Press VCR.
2 Press MENU.
3 Press 5 or to select AUTO
TUNER SET UP, then press OK/
STATUS.
4 Press 5 or to select your countrys
name, then press OK/STATUS.
5 Press 5 or to select your preferred
language, then press OK/STATUS.
6 Press 5 or to select FOLLOW
TV, then press OK/STATUS. The
Follow TV screen appears and then
Guide Channel Set screen appears.
2
Confirm Programmed Channel
Information List
Once it is completed, FOLLOW TV
COMPLETED is displayed on the
screen for about 5 seconds.
The following screen will appear after
5 seconds, or if you press MENU;
C: Cable
PR CH ID PR CH ID
01 25 ARD 08 C26 E-SP
02 C08 SKY1 09 C33 3SAT
03 10 ZDF 10 55 WEST
04 C65 RAI1 11 C24 SAT1
05 C31 BBC1 12 C23
OSF
06 C32 BBC2 13 C25
ESPN
07 C24 BBC4 14 C48
20G
SELECT :
5
EDIT : OK
ERASE : CLEAR
END : MENU
DSPC ON
O. S. D. ON
DIRECT REC ON
AUTO SP=LP TIMER OFF
DIGITAL 3R ON
\POWER SAVE OFF
AUTO SAT
RECORD LINK OFF
NEXT PAGE
SELECT:
5
CHANGE : 4
END : MENU
Untitled-2 16/08/2000, 15:3716
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips VR1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips VR1100 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info