462271
14
Zoom out
Zoom in
Previous page
1/39
Next page
15
Setting the Video Channel
Video Channel (RF Output Channel) is the channel on which your TV receives picture and sound signals from the VCR
through the RF cable.
IMPORTANT
Perform the following steps only if
Video Channel Set has not been done correctly by the Auto Set Up function. (P.12)
you set up the VCRs tuner by Preset Download (P.14) instead of using the Auto Set Up function.
interference appears in the TV picture after you have moved to a different area or a new station has started
broadcasting in your area.
you change the connection between your VCR and TV from RF connection to Scart or S-Video connection, or vice
versa.
1 Make sure the VCR is turned off and no cassette is inserted.
2 Turn on the TV, and tune it to any UHF channel (between 22 and 69) you want to use as the video channel on the TV.
Select a channel not used in your area.
3 Press STOP/EJECT 7 /0 on the front panel for more than 5 seconds.
The following indication appears on the display.
4 Press PROGRAMME5/ on the front panel to select an appropriate TV system number for your area.
1. For B/G (other countries).
2. For D/K (Magyarorszag, Ceska Republika, Polska, or other Eastern Europe).
5 Press OK/STATUS on the remote control.
The channel number starts flashing on the display.
6 Press PROGRAMME5/ on the front panel to select the channel you have tuned on the TV as the video channel in
step 2.
A test signal (two vertical white bars) appears on the TV.
7 Press OK/STATUS to finish the video channel setting.
To watch a picture from this VCR on the TV, select the same channel you have selected as the video channel (in step 2
above) on the TV.
TV system number starts flashing.
Channel number starts flashing.
If you use SCART connection or S-Video connection,
you do not need the video channel so you have to set
the video channel to off. To turn it off, press
PROGRAMME
(or
on the remote control) until
“– –” appears on the channel number position.
Test signal
(two vertical white bars)
Untitled-2 16/08/2000, 15:3615
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips VR1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips VR1100 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info